kernel.git/sound/hda/codecs/side-codecs, branch master

ALSA: hda/tas2781: A workaround solution to lower-vol issue among lower calibrated-impedance micro-speaker on TAS2781

2026-02-28T08:28:06Z

On TAS2781, if the Speaker calibrated impedance is lower than default value hard-coded inside the TAS2781, it will cuase vol lower than normal. In order to fix this issue, the parameter of SineGainI need updating. Signed-off-by: Shenghao Ding Tested-by: Matthew Schwartz Link: https://patch.msgid.link/20260227144641.1243-1-shenghao-ding@ti.com Signed-off-by: Takashi Iwai

ALSA: hda: cs35l56: Remove unnecessary struct cs_dsp_client_ops

2026-02-26T13:05:24Z

Since commit af37511305c0 ("firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops") the client doesn't have to provide a struct cs_dsp_client_ops. So remove the dummy cs_dsp_client_ops. Signed-off-by: Richard Fitzgerald Link: https://patch.msgid.link/20260226124115.1811187-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai

ALSA: hda: cs35l56: Fix signedness error in cs35l56_hda_posture_put()

2026-02-26T11:42:59Z

In cs35l56_hda_posture_put() assign ucontrol->value.integer.value[0] to a long instead of an unsigned long. ucontrol->value.integer.value[0] is a long. This fixes the sparse warning: sound/hda/codecs/side-codecs/cs35l56_hda.c:256:20: warning: unsigned value that used to be signed checked against zero? sound/hda/codecs/side-codecs/cs35l56_hda.c:252:29: signed value source Signed-off-by: Richard Fitzgerald Fixes: 73cfbfa9caea8 ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Link: https://patch.msgid.link/20260226111728.1700431-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai

ALSA: hda/tas2781: Ignore reset check for SPI device

2026-02-11T09:00:38Z

In the SPI driver probe, the device should be in the default state, so the device status check is not necessary. It should be forced to do the firmware download as I2C device. Signed-off-by: Baojun Xu Link: https://patch.msgid.link/20260211030946.2330-1-baojun.xu@ti.com Signed-off-by: Takashi Iwai

Merge tag 'asoc-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2026-02-09T16:39:11Z

ASoC: Updates for v7.0 This release is almost all abut driers, there's very little core work here, although some of that driver work is in more generic areas like SDCA and SOF: - Generic SDCA support for reporting jack events. - Continuing platform support, cleanup and feature improements for the AMD, Intel, Qualcomm and SOF code. - Platform description improvements for the Cirrus drivers. - Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo CV1800B. We also pulled in one small SPI API update and some more substantial regmap work (cache description improvements) for use in drivers.

ASoC: tas2781: Put three different calibrated data solution into the same data structure

2026-02-04T13:38:02Z

TAS2781 driver supports three solutions of calibrated data. The first is from the driver itself: driver reads the calibrated files directly during probe; The second is from user space: during init of audio hal, the audio hal will pass the calibrated data via kcontrol interface. Driver will store this data in "struct calidata" for use. The third is from UEFI, mainly used in hda device. These three solutions save the calibrated data into different data structures. It is time to put them together into "struct calidata" for use. Signed-off-by: Shenghao Ding Link: https://patch.msgid.link/20260202102757.532-1-shenghao-ding@ti.com Signed-off-by: Mark Brown

ALSA: hda/tas2781: Add tas2781_hda::catlog_id init

2026-01-27T08:58:37Z

The default of tas2781_hda::catlog_id is DELL, which cause calibration data is not loaded in HP SPI-basded Laptop, because only HP laptop supports SPI-based TAS2781. Fixes: 9fa6a693ad8d ("ALSA: hda/tas2781: Remove tas2781_spi_fwlib.c and leverage SND_SOC_TAS2781_FMWLIB") Signed-off-by: Shenghao Ding Link: https://patch.msgid.link/20260126031816.1123-1-shenghao-ding@ti.com Signed-off-by: Takashi Iwai

ALSA: hda/tas2781: Drop the unused macro definition

2026-01-23T11:38:56Z

Niether TASDEVICE_CALIBRATION_REG_ADDRESS nor TASDEV_UEFI_CALI_REG_ADDR_FLG is referenced in the code, drop both. Signed-off-by: Shenghao Ding Link: https://patch.msgid.link/20260123010000.1841-1-shenghao-ding@ti.com Signed-off-by: Takashi Iwai

ALSA: hda/cirrus_scodec_test: Use faux_device instead of platform_device

2026-01-16T14:17:53Z

The dummy GPIO driver doesn't need to be a platform device. So make it a faux_device driver. Signed-off-by: Richard Fitzgerald Link: https://patch.msgid.link/20260115143920.1553783-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai

Merge branch 'for-linus' into for-next

2026-01-16T14:17:16Z

Pull 6.19-devel branch for applying cirrus scodec test patches. Signed-off-by: Takashi Iwai