kernel.git/sound/firewire, branch linux-5.0.y

ALSA: dice: add support for Solid State Logic Duende Classic/Mini

2019-04-05T20:34:47Z

[ Upstream commit b2e9e1c8810ee05c95f4d55800b8afae70ab01b4 ] Duende Classic was produced by Solid State Logic in 2006, as a first model of Duende DSP series. The following model, Duende Mini was produced in 2008. They are designed to receive isochronous packets for PCM frames via IEEE 1394 bus, perform signal processing by downloaded program, then transfer isochronous packets for converted PCM frames. These two models includes the same embedded board, consists of several ICs below: - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer - Altera MAX 3000A CPLD for programs - Analog devices, SHARC ADSP-21363 for signal processing (4 chips) This commit adds support for the two models to ALSA dice driver. Like support for the other devices, packet streaming is just available. Userspace applications should be developed if full features became available; e.g. program uploader and parameter controller. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 349771402425, 'cmc': True, 'cyc_clk_acc': 255, 'generation': 1, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 20674, 'pmc': False}, 'root-directory': [ ['VENDOR', 20674], ['DESCRIPTOR', 'Solid State Logic'], ['MODEL', 112], ['DESCRIPTOR', 'Duende board'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': True}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 20674], ['VERSION', 1], ['MODEL', 112], ['DESCRIPTOR', 'Duende board']]]]} Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ALSA: firewire-motu: use 'version' field of unit directory to identify model

2019-03-27T05:17:51Z

commit 2d012c65a9ca26a0ef87ea0a42f1653dd37155f5 upstream. Current ALSA firewire-motu driver uses the value of 'model' field of unit directory in configuration ROM for modalias for MOTU FireWire models. However, as long as I checked, Pre8 and 828mk3(Hybrid) have the same value for the field (=0x100800). unit | version | model --------------- | --------- | ---------- 828mkII | 0x000003 | 0x101800 Traveler | 0x000009 | 0x107800 Pre8 | 0x00000f | 0x100800 <- 828mk3(FW) | 0x000015 | 0x106800 AudioExpress | 0x000033 | 0x104800 828mk3(Hybrid) | 0x000035 | 0x100800 <- When updating firmware for MOTU 8pre FireWire from v1.0.0 to v1.0.3, I got change of the value from 0x100800 to 0x103800. On the other hand, the value of 'version' field is fixed to 0x00000f. As a quick glance, the higher 12 bits of the value of 'version' field represent firmware version, while the lower 12 bits is unknown. By induction, the value of 'version' field represents actual model. This commit changes modalias to match the value of 'version' field, instead of 'model' field. For degug, long name of added sound card includes hexadecimal value of 'model' field. Fixes: 6c5e1ac0e144 ("ALSA: firewire-motu: add support for Motu Traveler") Signed-off-by: Takashi Sakamoto Cc: # v4.19+ Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: firewire-motu: fix construction of PCM frame for capture direction

2019-03-19T12:10:56Z

commit f97a0944a72b26a2bece72516294e112a890f98a upstream. In data blocks of common isochronous packet for MOTU devices, PCM frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described in IEC 61883-6. The frames are not aligned to quadlet. For capture PCM substream, ALSA firewire-motu driver constructs PCM frames by reading data blocks byte-by-byte. However this operation includes bug for lower byte of the PCM sample. This brings invalid content of the PCM samples. This commit fixes the bug. Reported-by: Peter Sjöberg Cc: # v4.12+ Fixes: 4641c9394010 ("ALSA: firewire-motu: add MOTU specific protocol layer") Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56

2019-03-19T12:10:56Z

commit 7dc661bd8d3261053b69e4e2d0050cd1ee540fc1 upstream. ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The entry matches vendor_id in root directory and model_id in unit directory of configuration ROM for IEEE 1394 bus. On the other hand, configuration ROM of Focusrite Liquid Saffire 56 has the same vendor_id and model_id. This device is an application of TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be bound to it randomly instead of ALSA dice driver. At present, drivers in ALSA firewire stack can not handle this situation appropriately. This commit uses more identical mod_alias for Focusrite Saffire Pro 10 I/O in ALSA bebob driver. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 042a829d bus_info_length 4, crc_length 42, crc 33437 404 31333934 bus_name "1394" 408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100, max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400) 40c 00130e01 company_id 00130e | 410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0 root directory ----------------------------------------------------------------- 414 0009d31c directory_length 9, crc 54044 418 04000014 hardware version 41c 0c0083c0 node capabilities per IEEE 1394 420 0300130e vendor 424 81000012 --> descriptor leaf at 46c 428 17000006 model 42c 81000016 --> descriptor leaf at 484 430 130120c2 version 434 d1000002 --> unit directory at 43c 438 d4000006 --> dependent info directory at 450 unit directory at 43c ----------------------------------------------------------------- 43c 0004707c directory_length 4, crc 28796 440 1200a02d specifier id: 1394 TA 444 13010001 version: AV/C 448 17000006 model 44c 81000013 --> descriptor leaf at 498 dependent info directory at 450 ----------------------------------------------------------------- 450 000637c7 directory_length 6, crc 14279 454 120007f5 specifier id 458 13000001 version 45c 3affffc7 (immediate value) 460 3b100000 (immediate value) 464 3cffffc7 (immediate value) 468 3d600000 (immediate value) descriptor leaf at 46c ----------------------------------------------------------------- 46c 00056f3b leaf_length 5, crc 28475 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 466f6375 "Focu" 47c 73726974 "srit" 480 65000000 "e" descriptor leaf at 484 ----------------------------------------------------------------- 484 0004a165 leaf_length 4, crc 41317 488 00000000 textual descriptor 48c 00000000 minimal ASCII 490 50726f31 "Pro1" 494 30494f00 "0IO" descriptor leaf at 498 ----------------------------------------------------------------- 498 0004a165 leaf_length 4, crc 41317 49c 00000000 textual descriptor 4a0 00000000 minimal ASCII 4a4 50726f31 "Pro1" 4a8 30494f00 "0IO" $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 040442e4 bus_info_length 4, crc_length 4, crc 17124 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00130e04 company_id 00130e | 410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9 root directory ----------------------------------------------------------------- 414 00065612 directory_length 6, crc 22034 418 0300130e vendor 41c 8100000a --> descriptor leaf at 444 420 17000006 model 424 8100000e --> descriptor leaf at 45c 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000418a0 directory_length 4, crc 6304 434 1200130e specifier id 438 13000001 version 43c 17000006 model 440 8100000f --> descriptor leaf at 47c descriptor leaf at 444 ----------------------------------------------------------------- 444 00056f3b leaf_length 5, crc 28475 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 466f6375 "Focu" 454 73726974 "srit" 458 65000000 "e" descriptor leaf at 45c ----------------------------------------------------------------- 45c 000762c6 leaf_length 7, crc 25286 460 00000000 textual descriptor 464 00000000 minimal ASCII 468 4c495155 "LIQU" 46c 49445f53 "ID_S" 470 41464649 "AFFI" 474 52455f35 "RE_5" 478 36000000 "6" descriptor leaf at 47c ----------------------------------------------------------------- 47c 000762c6 leaf_length 7, crc 25286 480 00000000 textual descriptor 484 00000000 minimal ASCII 488 4c495155 "LIQU" 48c 49445f53 "ID_S" 490 41464649 "AFFI" 494 52455f35 "RE_5" 498 36000000 "6" Cc: # v3.16+ Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: bebob: fix model-id of unit for Apogee Ensemble

2018-12-19T13:36:35Z

This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: code refactoring to handle model-specific registers

2018-12-16T09:18:31Z

As a result of investigation for Fireface 800, 'struct snd_ff_spec.regs' is just for higher address to receive tx asynchronous packets of MIDI messages, thus it can be simplified. This commit simplifies it. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: add support for packet streaming on Fireface 800

2018-12-16T09:18:29Z

This commit adds a functionality to multiplex PCM frames into isochronous packets and demultiplex PCM frames from isochronous packets for ALSA PCM applications. Fireface 800 voluntarily maintains resources for tx isochronous communication. It performs reservation of isochronous channel and allocation/update of bandwidth in some cases below: - at a first request to allocation after bus resets - at requests to allocation when further bandwidth is required When request is grant and the unit is prepared, read data from 0x0000801c0008 represents isochronous channel for tx stream, then the unit can handle requests to start communication. If driver send the request without checking the register, the unit takes panic to continue bus resets. The unit starts transmission of tx packets after receiving several rx packets from driver. I note that the unit can process tx/rx packets and generate/record sound regardless of HOST LED. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: allocate isochronous resources in mode-specific implementation

2018-12-16T09:18:27Z

The way to maintain isochronous resources on bus is different between Fireface 400/800. This commit is a preparation. This commit moves a function to allocate resource to model-dependent implementation. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: code refactoring to handle multiplier mode

2018-12-16T09:18:25Z

Fireface 400/800 use three modes against the number of data channels in data block for both tx/rx packets. This commit adds refactoring for it. Some enumerators are added to represent each of mode and a function is added to calculate the mode from sampling frequency code (sfc). Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireface: share helper function to switch fetching mode

2018-12-16T09:18:23Z

Both of Fireface 400/800 have the same register to switch frame fetching mode regardless of difference of available number of PCM frames in rx isochronous packet. This commit moves a helper function from model-dependent implementation. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai