kernel.git/sound/arm, branch linux-2.6.25.y

[ALSA] Remove sound/driver.h

2008-01-31T16:29:48Z

This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela

[ALSA] Add missing device link

2008-01-31T16:29:37Z

Added the missing link to struct device from the card instance. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela

[ARM] 4690/1: PXA: fix CKEN corruption in PXA27x AC97 cold reset code

2007-12-08T14:36:06Z

Fix CKEN register corruption in the PXA27x cold reset code located in sound/arm/pxa27x-ac97.c. The problem has been introduced with a pxa_set_cken() function change in linux 2.6.23. This patch is based on patch 4527/1 that fixes the same problem in the ASoC PXA-AC97 driver. Additionally a definition for the CKEN index value is added and applied to both PXA AC97 drivers. Signed-off-by: Michael Brunner Signed-off-by: Russell King

Add missing newlines to some uses of dev_ messages

2007-10-18T21:37:28Z

Found these while looking at printk uses. Add missing newlines to dev_ uses Add missing KERN_ prefixes to multiline dev_s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches Cc: "Luck, Tony" Cc: Jens Axboe Cc: Mark M. Hoffman Cc: Roland Dreier Cc: Tilman Schmidt Cc: David Woodhouse Cc: Jeff Garzik Cc: Stephen Hemminger Cc: Greg KH Cc: Jeremy Fitzhardinge Cc: Geert Uytterhoeven Cc: Alessandro Zummo Cc: David Brownell Cc: James Smart Cc: Andrew Vasquez Cc: "Antonino A. Daplas" Cc: Evgeniy Polyakov Cc: Russell King Cc: Jaroslav Kysela Cc: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[ALSA] Get rid of dead code in sound/arm/sa11xx-uda1341.c

2007-10-16T13:58:24Z

File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 82 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 103 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 241 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 310 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 334 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 344 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 357 Unknown CONFIG option! CONFIG_H3600_HAL Signed-off-by: Michal Piotrowski Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela

[ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resume

2007-07-02T12:39:37Z

The PXA CKEN changes broken syspend/resume on the pxa27x. This patch corrects the problem and fixes another couple of bad references. Signed-off-by: Richard Purdie Signed-off-by: Russell King

potential parse error in ifdef

2007-06-01T15:18:27Z

I have made a tool to parse the kernel that does not pre-process the source. That means that my parser tries to parse all the code, including code in the #else branch or code that is not often compiled because the driver is not very used (or not used at all). So, my parser sometimes reports parse error not originally detected by gcc. Here is my (first) patch. [akpm@linux-foundation.org: fix amd8111e.c] Signed-off-by: Yoann Padioleau Acked-by: Matthew Wilcox Acked-by: Wim Van Sebroeck Acked-by: David Woodhouse Acked-by: Jeff Garzik Acked-by: James Bottomley Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX

2007-04-21T22:14:01Z

This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao Signed-off-by: Russell King

[ARM] Fix ARM AACI ALSA driver

2007-02-20T15:44:23Z

CC [M] sound/arm/aaci.o sound/arm/aaci.c:729: error: parse error before '*' token sound/arm/aaci.c:731: warning: function declaration isn't a prototype ... sound/arm/aaci.c:786: error: parse error before '*' token sound/arm/aaci.c:786: warning: function declaration isn't a prototype ... sound/arm/aaci.c:827: error: parse error before '*' token sound/arm/aaci.c:828: warning: function declaration isn't a prototype ... sound/arm/aaci.c:845: error: parse error before "aaci_capture_ops" sound/arm/aaci.c:845: warning: type defaults to `int' in declaration of `aaci_capture_ops' Signed-off-by: Russell King

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2007-02-19T21:18:39Z

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits) [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports [ARM] 4140/1: AACI stability add ac97 timeout and retries [ARM] 4139/1: AACI record support [ARM] 4138/1: AACI: multiple channel support for IRQ handling [ARM] 4211/1: Provide a defconfig for ns9xxx [ARM] 4210/1: base for new machine type "NetSilicon NS9360" [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM [ARM] 4221/1: S3C2443: DMA support [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev [ARM] 4219/1: S3C2443: DMA source definitions [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443 [ARM] 4217/1: S3C24XX: remove the dma channel show at startup [ARM] 4090/2: avoid clash between PXA and SA1111 defines [ARM] 4216/1: add .gitignore entries for ARM specific files [ARM] 4214/2: S3C2410: Add Armzone QT2410 [ARM] 4215/1: s3c2410 usb device: per-platform vbus_draw [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos [ARM] 4137/1: Add kexec support [ARM] 4201/1: SMP barriers pair needed for the secondary boot process ... Fix up conflict due to typedef removal in sound/arm/aaci.h