kernel.git/net/unix, branch linux-6.10.y

af_unix: Remove put_pid()/put_cred() in copy_peercred().

2024-09-12T09:12:50Z

[ Upstream commit e4bd881d987121dbf1a288641491955a53d9f8f7 ] When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket, the listener's sk_peer_pid/sk_peer_cred are copied to the client in copy_peercred(). Then, the client's sk_peer_pid and sk_peer_cred are always NULL, so we need not call put_pid() and put_cred() there. Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

af_unix: Don't retry after unix_state_lock_nested() in unix_stream_connect().

2024-08-14T13:34:09Z

[ Upstream commit 1ca27e0c8c13ac50a4acf9cdf77069e2d94a547d ] When a SOCK_(STREAM|SEQPACKET) socket connect()s to another one, we need to lock the two sockets to check their states in unix_stream_connect(). We use unix_state_lock() for the server and unix_state_lock_nested() for client with tricky sk->sk_state check to avoid deadlock. The possible deadlock scenario are the following: 1) Self connect() 2) Simultaneous connect() The former is simple, attempt to grab the same lock, and the latter is AB-BA deadlock. After the server's unix_state_lock(), we check the server socket's state, and if it's not TCP_LISTEN, connect() fails with -EINVAL. Then, we avoid the former deadlock by checking the client's state before unix_state_lock_nested(). If its state is not TCP_LISTEN, we can make sure that the client and the server are not identical based on the state. Also, the latter deadlock can be avoided in the same way. Due to the server sk->sk_state requirement, AB-BA deadlock could happen only with TCP_LISTEN sockets. So, if the client's state is TCP_LISTEN, we can give up the second lock to avoid the deadlock. CPU 1 CPU 2 CPU 3 connect(A -> B) connect(B -> A) listen(A) --- --- --- unix_state_lock(B) B->sk_state == TCP_LISTEN READ_ONCE(A->sk_state) == TCP_CLOSE ^^^^^^^^^ ok, will lock A unix_state_lock(A) .--------------' WRITE_ONCE(A->sk_state, TCP_LISTEN) | unix_state_unlock(A) | | unix_state_lock(A) | A->sk_sk_state == TCP_LISTEN | READ_ONCE(B->sk_state) == TCP_LISTEN v ^^^^^^^^^^ unix_state_lock_nested(A) Don't lock B !! Currently, while checking the client's state, we also check if it's TCP_ESTABLISHED, but this is unlikely and can be checked after we know the state is not TCP_CLOSE. Moreover, if it happens after the second lock, we now jump to the restart label, but it's unlikely that the server is not found during the retry, so the jump is mostly to revist the client state check. Let's remove the retry logic and check the state against TCP_CLOSE first. Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash

2024-08-03T07:01:01Z

[ Upstream commit 638f32604385fd23059985da8de918e9c18f0b98 ] AF_UNIX socket tracks the most recent OOB packet (in its receive queue) with an `oob_skb` pointer. BPF redirecting does not account for that: when an OOB packet is moved between sockets, `oob_skb` is left outdated. This results in a single skb that may be accessed from two different sockets. Take the easy way out: silently drop MSG_OOB data targeting any socket that is in a sockmap or a sockhash. Note that such silent drop is akin to the fate of redirected skb's scm_fp_list (SCM_RIGHTS, SCM_CREDENTIALS). For symmetry, forbid MSG_OOB in unix_bpf_recvmsg(). Fixes: 314001f0bf92 ("af_unix: Add OOB support") Suggested-by: Kuniyuki Iwashima Signed-off-by: Michal Luczaj Signed-off-by: Daniel Borkmann Tested-by: Jakub Sitnicki Reviewed-by: Kuniyuki Iwashima Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/20240713200218.2140950-2-mhal@rbox.co Signed-off-by: Sasha Levin

af_unix: Fix uninit-value in __unix_walk_scc()

2024-07-04T02:36:22Z

KMSAN reported uninit-value access in __unix_walk_scc() [1]. In the list_for_each_entry_reverse() loop, when the vertex's index equals it's scc_index, the loop uses the variable vertex as a temporary variable that points to a vertex in scc. And when the loop is finished, the variable vertex points to the list head, in this case scc, which is a local variable on the stack (more precisely, it's not even scc and might underflow the call stack of __unix_walk_scc(): container_of(&scc, struct unix_vertex, scc_entry)). However, the variable vertex is used under the label prev_vertex. So if the edge_stack is not empty and the function jumps to the prev_vertex label, the function will access invalid data on the stack. This causes the uninit-value access issue. Fix this by introducing a new temporary variable for the loop. [1] BUG: KMSAN: uninit-value in __unix_walk_scc net/unix/garbage.c:478 [inline] BUG: KMSAN: uninit-value in unix_walk_scc net/unix/garbage.c:526 [inline] BUG: KMSAN: uninit-value in __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584 __unix_walk_scc net/unix/garbage.c:478 [inline] unix_walk_scc net/unix/garbage.c:526 [inline] __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312 worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393 kthread+0x3c4/0x530 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was stored to memory at: unix_walk_scc net/unix/garbage.c:526 [inline] __unix_gc+0x2adf/0x3c20 net/unix/garbage.c:584 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312 worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393 kthread+0x3c4/0x530 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Local variable entries created at: ref_tracker_free+0x48/0xf30 lib/ref_tracker.c:222 netdev_tracker_free include/linux/netdevice.h:4058 [inline] netdev_put include/linux/netdevice.h:4075 [inline] dev_put include/linux/netdevice.h:4101 [inline] update_gid_event_work_handler+0xaa/0x1b0 drivers/infiniband/core/roce_gid_mgmt.c:813 CPU: 1 PID: 12763 Comm: kworker/u8:31 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: events_unbound __unix_gc Fixes: 3484f063172d ("af_unix: Detect Strongly Connected Components.") Reported-by: syzkaller Signed-off-by: Shigeru Yoshida Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20240702160428.10153-1-syoshida@redhat.com Signed-off-by: Jakub Kicinski

af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.

2024-06-27T10:05:01Z

Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the OOB skb is at the head of the receive queue and no new OOB data is queued. Without fix: # RUN msg_oob.no_peek.oob ... # msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1) # oob: Test terminated by assertion # FAIL msg_oob.no_peek.oob not ok 2 msg_oob.no_peek.oob With fix: # RUN msg_oob.no_peek.oob ... # OK msg_oob.no_peek.oob ok 2 msg_oob.no_peek.oob Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni

af_unix: Don't stop recv() at consumed ex-OOB skb.

2024-06-27T10:05:01Z

Currently, recv() is stopped at a consumed OOB skb even if a new OOB skb is queued and we can ignore the old OOB skb. >>> from socket import * >>> c1, c2 = socket(AF_UNIX, SOCK_STREAM) >>> c1.send(b'hellowor', MSG_OOB) 8 >>> c2.recv(1, MSG_OOB) # consume OOB data stays at middle of recvq. b'r' >>> c1.send(b'ld', MSG_OOB) 2 >>> c2.recv(10) # recv() stops at the old consumed OOB b'hellowo' # should be 'hellowol' manage_oob() should not stop recv() at the old consumed OOB skb if there is a new OOB data queued. Note that TCP behaviour is apparently wrong in this test case because we can recv() the same OOB data twice. Without fix: # RUN msg_oob.no_peek.ex_oob_ahead_break ... # msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo # msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol # msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8) # ex_oob_ahead_break: Test terminated by assertion # FAIL msg_oob.no_peek.ex_oob_ahead_break not ok 11 msg_oob.no_peek.ex_oob_ahead_break With fix: # RUN msg_oob.no_peek.ex_oob_ahead_break ... # msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol # msg_oob.c:147:ex_oob_ahead_break:TCP :helloworl # OK msg_oob.no_peek.ex_oob_ahead_break ok 11 msg_oob.no_peek.ex_oob_ahead_break Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni

af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.

2024-06-27T10:05:01Z

Let's say a socket send()s "hello" with MSG_OOB and "world" without flags, >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX) >>> c1.send(b'hello', MSG_OOB) 5 >>> c1.send(b'world') 5 and its peer recv()s "hell" and "o". >>> c2.recv(10) b'hell' >>> c2.recv(1, MSG_OOB) b'o' Now the consumed OOB skb stays at the head of recvq to return a correct value for ioctl(SIOCATMARK), which is broken now and fixed by a later patch. Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL, so recv() ends up with -EAGAIN. >>> c2.setblocking(False) # This causes -EAGAIN even with available data >>> c2.recv(5) Traceback (most recent call last): File "", line 1, in BlockingIOError: [Errno 11] Resource temporarily unavailable However, next recv() will return the following available data, "world". >>> c2.recv(5) b'world' When the consumed OOB skb is at the head of the queue, we need to fetch the next skb to fix the weird behaviour. Note that the issue does not happen without MSG_DONTWAIT because we can retry after manage_oob(). This patch also adds a test case that covers the issue. Without fix: # RUN msg_oob.no_peek.ex_oob_break ... # msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable # msg_oob.c:135:ex_oob_break:Expected:ld # msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2) # ex_oob_break: Test terminated by assertion # FAIL msg_oob.no_peek.ex_oob_break not ok 8 msg_oob.no_peek.ex_oob_break With fix: # RUN msg_oob.no_peek.ex_oob_break ... # OK msg_oob.no_peek.ex_oob_break ok 8 msg_oob.no_peek.ex_oob_break Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni

af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.

2024-06-27T10:05:00Z

After consuming OOB data, recv() reading the preceding data must break at the OOB skb regardless of MSG_PEEK. Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is not compliant with TCP. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX) >>> c1.send(b'hello', MSG_OOB) 5 >>> c1.send(b'world') 5 >>> c2.recv(1, MSG_OOB) b'o' >>> c2.recv(9, MSG_PEEK) # This should return b'hell' b'hellworld' # even with enough buffer. Let's fix it by returning NULL for consumed skb and unlinking it only if MSG_PEEK is not specified. This patch also adds test cases that add recv(MSG_PEEK) before each recv(). Without fix: # RUN msg_oob.peek.oob_ahead_break ... # msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld # msg_oob.c:135:oob_ahead_break:Expected:hell # msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4) # oob_ahead_break: Test terminated by assertion # FAIL msg_oob.peek.oob_ahead_break not ok 13 msg_oob.peek.oob_ahead_break With fix: # RUN msg_oob.peek.oob_ahead_break ... # OK msg_oob.peek.oob_ahead_break ok 13 msg_oob.peek.oob_ahead_break Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni

af_unix: Read with MSG_PEEK loops if the first unread byte is OOB

2024-06-13T15:03:55Z

Read with MSG_PEEK flag loops if the first byte to read is an OOB byte. commit 22dd70eb2c3d ("af_unix: Don't peek OOB data without MSG_OOB.") addresses the loop issue but does not address the issue that no data beyond OOB byte can be read. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c2.setsockopt(SOL_SOCKET, SO_OOBINLINE, 1) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Rao Shoaib Reviewed-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20240611084639.2248934-1-Rao.Shoaib@oracle.com Signed-off-by: Jakub Kicinski

af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().

2024-06-06T10:57:15Z

While dumping sockets via UNIX_DIAG, we do not hold unix_state_lock(). Let's use READ_ONCE() to read sk->sk_shutdown. Fixes: e4e541a84863 ("sock-diag: Report shutdown for inet and unix sockets (v2)") Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni