kernel.git/net/tipc/link.c, branch linux-4.9.y

tipc: Fix potential OOB in tipc_link_proto_rcv()

2022-12-14T10:24:35Z

[ Upstream commit 743117a997bbd4840e827295c07e59bcd7f7caa3 ] Fix the potential risk of OOB if skb_linearize() fails in tipc_link_proto_rcv(). Fixes: 5cbb28a4bf65 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers") Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

tipc: improve size validations for received domain records

2022-02-11T07:41:17Z

commit 9aa422ad326634b76309e8ff342c246800621216 upstream. The function tipc_mon_rcv() allows a node to receive and process domain_record structs from peer nodes to track their views of the network topology. This patch verifies that the number of members in a received domain record does not exceed the limit defined by MAX_MON_DOMAIN, something that may otherwise lead to a stack overflow. tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where we are reading a 32 bit message data length field into a uint16. To avert any risk of bit overflow, we add an extra sanity check for this in that function. We cannot see that happen with the current code, but future designers being unaware of this risk, may introduce it by allowing delivery of very large (> 64k) sk buffers from the bearer layer. This potential problem was identified by Eric Dumazet. This fixes CVE-2022-0435 Reported-by: Samuel Page Reported-by: Eric Dumazet Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework") Signed-off-by: Jon Maloy Reviewed-by: Xin Long Reviewed-by: Samuel Page Reviewed-by: Eric Dumazet Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

tipc: Fix backport of b77413446408fdd256599daf00d5be72b5f3e7c6

2021-08-04T09:58:01Z

Clang warns: net/tipc/link.c:896:23: warning: variable 'hdr' is uninitialized when used here [-Wuninitialized] imp = msg_importance(hdr); ^~~ net/tipc/link.c:890:22: note: initialize the variable 'hdr' to silence this warning struct tipc_msg *hdr; ^ = NULL 1 warning generated. The backport of commit b77413446408 ("tipc: fix NULL deref in tipc_link_xmit()") to 4.9 as commit 310014f572a5 ("tipc: fix NULL deref in tipc_link_xmit()") added the hdr initialization above the if (unlikely(msg_size(hdr) > mtu)) { like in the upstream commit; however, in 4.9, that check is below imp's first use because commit 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") is not present. This results in hdr being used uninitialized. Fix this by moving hdr's initialization before imp and after the if check like the original backport did. Cc: Hoang Le Cc: Jon Maloy Cc: Ying Xue Fixes: 310014f572a5 ("tipc: fix NULL deref in tipc_link_xmit()") Reported-by: kernel test robot Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

tipc: fix NULL deref in tipc_link_xmit()

2021-01-23T14:38:19Z

[ Upstream commit b77413446408fdd256599daf00d5be72b5f3e7c6 ] The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028e270fd ("tipc: make media xmit call outside node spinlock context") Acked-by: Jon Maloy Signed-off-by: Hoang Le Link: https://lore.kernel.org/r/20210108071337.3598-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

tipc: fix skb may be leaky in tipc_link_input

2019-12-05T14:35:12Z

[ Upstream commit 7384b538d3aed2ed49d3575483d17aeee790fb06 ] When we free skb at tipc_data_input, we return a 'false' boolean. Then, skb passed to subcalling tipc_link_input in tipc_link_rcv, 1303 int tipc_link_rcv: ... 1354 if (!tipc_data_input(l, skb, l->inputq)) 1355 rc |= tipc_link_input(l, skb, l->inputq); Fix it by simple changing to a 'true' boolean when skb is being free-ed. Then, tipc_link_rcv will bypassed to subcalling tipc_link_input as above condition. Acked-by: Ying Xue Acked-by: Jon Maloy Signed-off-by: Hoang Le Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

tipc: allocate user memory with GFP_KERNEL flag

2017-07-05T12:40:27Z

[ Upstream commit 57d5f64d83ab5b5a5118b1597386dd76eaf4340d ] Until now, we allocate memory always with GFP_ATOMIC flag. When the system is under memory pressure and a user tries to send, the send fails due to low memory. However, the user application can wait for free memory if we allocate it using GFP_KERNEL flag. In this commit, we use allocate memory with GFP_KERNEL for all user allocation. Reported-by: Rune Torgersen Acked-by: Jon Maloy Signed-off-by: Parthasarathy Bhuvaragan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tipc: fix link statistics counter errors

2016-11-28T01:35:55Z

In commit e4bf4f76962b ("tipc: simplify packet sequence number handling") we changed the internal representation of the packet sequence number counters from u32 to u16, reflecting what is really sent over the wire. Since then some link statistics counters have been displaying incorrect values, partially because the counters meant to be used as sequence number snapshots are now used as direct counters, stored as u32, and partially because some counter updates are just missing in the code. In this commit we correct this in two ways. First, we base the displayed packet sent/received values on direct counters instead of as previously a calculated difference between current sequence number and a snapshot. Second, we add the missing updates of the counters. This change is compatible with the current netlink API, and requires no changes to the user space tools. Signed-off-by: Jon Maloy Signed-off-by: David S. Miller

tipc: fix compatibility bug in link monitoring

2016-11-26T01:06:18Z

commit 817298102b0b ("tipc: fix link priority propagation") introduced a compatibility problem between TIPC versions newer than Linux 4.6 and those older than Linux 4.4. In versions later than 4.4, link STATE messages only contain a non-zero link priority value when the sender wants the receiver to change its priority. This has the effect that the receiver resets itself in order to apply the new priority. This works well, and is consistent with the said commit. However, in versions older than 4.4 a valid link priority is present in all sent link STATE messages, leading to cyclic link establishment and reset on the 4.6+ node. We fix this by adding a test that the received value should not only be valid, but also differ from the current value in order to cause the receiving link endpoint to reset. Reported-by: Amar Nv Signed-off-by: Jon Maloy Signed-off-by: David S. Miller

tipc: fix broadcast link synchronization problem

2016-10-29T21:21:09Z

In commit 2d18ac4ba745 ("tipc: extend broadcast link initialization criteria") we tried to fix a problem with the initial synchronization of broadcast link acknowledge values. Unfortunately that solution is not sufficient to solve the issue. We have seen it happen that LINK_PROTOCOL/STATE packets with a valid non-zero unicast acknowledge number may bypass BCAST_PROTOCOL initialization, NAME_DISTRIBUTOR and other STATE packets with invalid broadcast acknowledge numbers, leading to premature opening of the broadcast link. When the bypassed packets finally arrive, they are inadvertently accepted, and the already correctly initialized acknowledge number in the broadcast receive link is overwritten by the invalid (zero) value of the said packets. After this the broadcast link goes stale. We now fix this by marking the packets where we know the acknowledge value is or may be invalid, and then ignoring the acks from those. To this purpose, we claim an unused bit in the header to indicate that the value is invalid. We set the bit to 1 in the initial BCAST_PROTOCOL synchronization packet and all initial ("bulk") NAME_DISTRIBUTOR packets, plus those LINK_PROTOCOL packets sent out before the broadcast links are fully synchronized. This minor protocol update is fully backwards compatible. Reported-by: John Thompson Tested-by: John Thompson Signed-off-by: Jon Maloy Signed-off-by: David S. Miller

tipc: send broadcast nack directly upon sequence gap detection

2016-09-03T00:10:25Z

Because of the risk of an excessive number of NACK messages and retransissions, receivers have until now abstained from sending broadcast NACKS directly upon detection of a packet sequence number gap. We have instead relied on such gaps being detected by link protocol STATE message exchange, something that by necessity delays such detection and subsequent retransmissions. With the introduction of unicast NACK transmission and rate control of retransmissions we can now remove this limitation. We now allow receiving nodes to send NACKS immediately, while coordinating the permission to do so among the nodes in order to avoid NACK storms. Reviewed-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller