kernel.git/net/sctp, branch linux-5.8.y

sctp: fix sctp_auth_init_hmacs() error path

2020-10-14T09:55:50Z

commit d42ee76ecb6c49d499fc5eb32ca34468d95dbc3e upstream. After freeing ep->auth_hmacs we have to clear the pointer or risk use-after-free as reported by syzbot: BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] BUG: KASAN: use-after-free in sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 Read of size 8 at addr ffff8880a8ff52c0 by task syz-executor941/6874 CPU: 0 PID: 6874 Comm: syz-executor941 Not tainted 5.9.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 sctp_endpoint_destroy+0x95/0x240 net/sctp/endpointola.c:203 sctp_endpoint_put net/sctp/endpointola.c:236 [inline] sctp_endpoint_free+0xd6/0x110 net/sctp/endpointola.c:183 sctp_destroy_sock+0x9c/0x3c0 net/sctp/socket.c:4981 sctp_v6_destroy_sock+0x11/0x20 net/sctp/socket.c:9415 sk_common_release+0x64/0x390 net/core/sock.c:3254 sctp_close+0x4ce/0x8b0 net/sctp/socket.c:1533 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:475 __sock_release+0xcd/0x280 net/socket.c:596 sock_close+0x18/0x20 net/socket.c:1277 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0xb7d/0x29f0 kernel/exit.c:806 do_group_exit+0x125/0x310 kernel/exit.c:903 __do_sys_exit_group kernel/exit.c:914 [inline] __se_sys_exit_group kernel/exit.c:912 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:912 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43f278 Code: Bad RIP value. RSP: 002b:00007fffe0995c38 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043f278 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf068 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_trace+0x174/0x300 mm/slab.c:3554 kmalloc include/linux/slab.h:554 [inline] kmalloc_array include/linux/slab.h:593 [inline] kcalloc include/linux/slab.h:605 [inline] sctp_auth_init_hmacs+0xdb/0x3b0 net/sctp/auth.c:464 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3422 [inline] kfree+0x10e/0x2b0 mm/slab.c:3760 sctp_auth_destroy_hmacs net/sctp/auth.c:511 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_init_hmacs net/sctp/auth.c:496 [inline] sctp_auth_init_hmacs+0x2b7/0x3b0 net/sctp/auth.c:454 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1f485649f529 ("[SCTP]: Implement SCTP-AUTH internals") Signed-off-by: Eric Dumazet Cc: Vlad Yasevich Cc: Neil Horman Cc: Marcelo Ricardo Leitner Acked-by: Marcelo Ricardo Leitner Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendant

2020-09-26T16:05:24Z

[ Upstream commit fe81d9f6182d1160e625894eecb3d7ff0222cac5 ] When calculating ancestor_size with IPv6 enabled, simply using sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for alignment in the struct sctp6_sock. On x86, there aren't any extra bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte boundary so there were 4 pad bytes that were omitted from the ancestor_size calculation. This would lead to corruption of the pd_lobby pointers, causing an oops when trying to free the sctp structure on socket close. Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant") Signed-off-by: Henry Ptasinski Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: not disable bh in the whole sctp_get_port_local()

2020-09-12T12:22:14Z

[ Upstream commit 3106ecb43a05dc3e009779764b9da245a5d082de ] With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: sctp: Fix negotiation of the number of data streams.

2020-08-27T07:31:47Z

[ Upstream commit ab921f3cdbec01c68705a7ade8bec628d541fc2b ] The number of output and input streams was never being reduced, eg when processing received INIT or INIT_ACK chunks. The effect is that DATA chunks can be sent with invalid stream ids and then discarded by the remote system. Fixes: 2075e50caf5ea ("sctp: convert to genradix") Signed-off-by: David Laight Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: shrink stream outq when fails to do addstream reconf

2020-07-23T01:00:12Z

When adding a stream with stream reconf, the new stream firstly is in CLOSED state but new out chunks can still be enqueued. Then once gets the confirmation from the peer, the state will change to OPEN. However, if the peer denies, it needs to roll back the stream. But when doing that, it only sets the stream outcnt back, and the chunks already in the new stream don't get purged. It caused these chunks can still be dequeued in sctp_outq_dequeue_data(). As its stream is still in CLOSE, the chunk will be enqueued to the head again by sctp_outq_head_data(). This chunk will never be sent out, and the chunks after it can never be dequeued. The assoc will be 'hung' in a dead loop of sending this chunk. To fix it, this patch is to purge these chunks already in the new stream by calling sctp_stream_shrink_out() when failing to do the addstream reconf. Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu Signed-off-by: Xin Long Signed-off-by: David S. Miller

sctp: shrink stream outq only when new outcnt < old outcnt

2020-07-23T01:00:12Z

It's not necessary to go list_for_each for outq->out_chunk_list when new outcnt >= old outcnt, as no chunk with higher sid than new (outcnt - 1) exists in the outqueue. While at it, also move the list_for_each code in a new function sctp_stream_shrink_out(), which will be used in the next patch. Signed-off-by: Xin Long Signed-off-by: David S. Miller

sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket

2020-06-25T23:11:33Z

If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard Signed-off-by: Marcelo Ricardo Leitner Tested-by: Corey Minyard Signed-off-by: David S. Miller

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2020-06-01T19:00:10Z

Pull crypto updates from Herbert Xu: "API: - Introduce crypto_shash_tfm_digest() and use it wherever possible. - Fix use-after-free and race in crypto_spawn_alg. - Add support for parallel and batch requests to crypto_engine. Algorithms: - Update jitter RNG for SP800-90B compliance. - Always use jitter RNG as seed in drbg. Drivers: - Add Arm CryptoCell driver cctrng. - Add support for SEV-ES to the PSP driver in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits) crypto: hisilicon - fix driver compatibility issue with different versions of devices crypto: engine - do not requeue in case of fatal error crypto: cavium/nitrox - Fix a typo in a comment crypto: hisilicon/qm - change debugfs file name from qm_regs to regs crypto: hisilicon/qm - add DebugFS for xQC and xQE dump crypto: hisilicon/zip - add debugfs for Hisilicon ZIP crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC crypto: hisilicon/qm - add debugfs to the QM state machine crypto: hisilicon/qm - add debugfs for QM crypto: stm32/crc32 - protect from concurrent accesses crypto: stm32/crc32 - don't sleep in runtime pm crypto: stm32/crc32 - fix multi-instance crypto: stm32/crc32 - fix run-time self test issue. crypto: stm32/crc32 - fix ext4 chksum BUG_ON() crypto: hisilicon/zip - Use temporary sqe when doing work crypto: hisilicon - add device error report through abnormal irq crypto: hisilicon - remove codes of directly report device errors through MSI crypto: hisilicon - QM memory management optimization crypto: hisilicon - unify initial value assignment into QM ...