kernel.git/net/sctp/protocol.c, branch linux-4.19.y

ip: Fix data-races around sysctl_ip_nonlocal_bind.

2022-07-29T15:10:31Z

[ Upstream commit 289d3b21fb0bfc94c4e98f10635bba1824e5f83c ] While reading sysctl_ip_nonlocal_bind, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

sctp: move 198 addresses from unusable to private scope

2021-07-31T06:22:38Z

[ Upstream commit 1d11fa231cabeae09a95cb3e4cf1d9dd34e00f08 ] The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses was never published. These addresses as private addresses should be allowed to use in SCTP. As Michael Tuexen suggested, this patch is to move 198 addresses from unusable to private scope. Reported-by: Sérgio Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

sctp: validate from_addr_param return

2021-07-20T14:16:03Z

[ Upstream commit 0c5dc070ff3d6246d22ddd931f23a6266249e3db ] Ilja reported that, simply putting it, nothing was validating that from_addr_param functions were operating on initialized memory. That is, the parameter itself was being validated by sctp_walk_params, but it doesn't check for types and their specific sizes and it could be a 0-length one, causing from_addr_param to potentially work over the next parameter or even uninitialized memory. The fix here is to, in all calls to from_addr_param, check if enough space is there for the wanted IP address type. Reported-by: Ilja Van Sprundel Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket

2020-07-01T03:17:05Z

[ Upstream commit 471e39df96b9a4c4ba88a2da9e25a126624d7a9c ] If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard Signed-off-by: Marcelo Ricardo Leitner Tested-by: Corey Minyard Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: fix possibly using a bad saddr with a given dst

2020-04-13T08:44:58Z

[ Upstream commit 582eea230536a6f104097dd46205822005d5fe3a ] Under certain circumstances, depending on the order of addresses on the interfaces, it could be that sctp_v[46]_get_dst() would return a dst with a mismatched struct flowi. For example, if when walking through the bind addresses and the first one is not a match, it saves the dst as a fallback (added in 410f03831c07), but not the flowi. Then if the next one is also not a match, the previous dst will be returned but with the flowi information for the 2nd address, which is wrong. The fix is to use a locally stored flowi that can be used for such attempts, and copy it to the parameter only in case it is a possible match, together with the corresponding dst entry. The patch updates IPv6 code mostly just to be in sync. Even though the issue is also present there, it fallback is not expected to work with IPv6. Fixes: 410f03831c07 ("sctp: add routing output fallback") Reported-by: Jin Meng Signed-off-by: Marcelo Ricardo Leitner Tested-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: fully initialize v4 addr in some functions

2019-12-31T15:34:40Z

[ Upstream commit b6f3320b1d5267e7b583a6d0c88dda518101740c ] Syzbot found a crash: BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline] BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline] BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 Call Trace: crc32_body lib/crc32.c:112 [inline] crc32_le_generic lib/crc32.c:179 [inline] __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90 crypto_shash_update+0x4c5/0x530 crypto/shash.c:107 crc32c+0x150/0x220 lib/libcrc32c.c:47 sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36 __skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640 sctp_compute_cksum include/net/sctp/checksum.h:59 [inline] sctp_packet_pack net/sctp/output.c:528 [inline] sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597 sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline] sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194 sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757 sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline] sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155 sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185 sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433 sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline] sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672 The issue was caused by transport->ipaddr set with uninit addr param, which was passed by: sctp_transport_init net/sctp/transport.c:47 [inline] sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100 sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611 sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline] where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize the padding of addr->v4. Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr) will become the part of skb, and the issue occurs. This patch is to fix it by initializing the padding of addr->v4 in sctp_v4_from_addr_param(), as well as other functions that do the similar thing, and these functions shouldn't trust that the caller initializes the memory, as Marcelo suggested. Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'

2019-09-19T07:09:32Z

[ Upstream commit b456d72412ca8797234449c25815e82f4e1426c0 ] The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: 8e2d61e0aed2 ("sctp: fix race on protocol/netns initialization") Signed-off-by: Christophe JAILLET Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: initialize _pad of sockaddr_in before copying to user memory

2019-04-17T06:38:41Z

[ Upstream commit 09279e615c81ce55e04835970601ae286e3facbe ] Syzbot report a kernel-infoleak: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 Call Trace: _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline] sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562 ... Uninit was stored to memory at: sctp_transport_init net/sctp/transport.c:61 [inline] sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115 sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637 sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline] sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361 ... Bytes 8-15 of 16 are uninitialized It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in struct sockaddr_in) wasn't initialized, but directly copied to user memory in sctp_getsockopt_peer_addrs(). So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as sctp_v6_addr_to_user() does. Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com Signed-off-by: Xin Long Tested-by: Alexander Potapenko Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

sctp: set flow sport from saddr only when it's 0

2019-02-06T16:30:10Z

[ Upstream commit ecf938fe7d0088077ee1280419a2b3c5429b47c8 ] Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set flow sport from 'saddr'. However, transport->saddr is set only when transport->dst exists in sctp_transport_route(). If sctp_transport_pmtu() is called without transport->saddr set, like when transport->dst doesn't exists, the flow sport will be set to 0 from transport->saddr, which will cause a wrong route to be got. Commit 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") made the issue be triggered more easily since sctp_transport_pmtu() would be called in sctp_transport_route() after that. In gerneral, fl4->fl4_sport should always be set to htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist in sctp_v4/6_get_dst(), which is the case: sctp_ootb_pkt_new() -> sctp_transport_route() For that, we can simply handle it by setting flow sport from saddr only when it's 0 in sctp_v4/6_get_dst(). Fixes: 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") Reported-by: Ying Xu Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: allocate sctp_sockaddr_entry with kzalloc

2019-01-22T20:40:36Z

commit 400b8b9a2a17918f8ce00786f596f530e7f30d50 upstream. The similar issue as fixed in Commit 4a2eb0c37b47 ("sctp: initialize sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event") also exists in sctp_inetaddr_event, as Alexander noticed. To fix it, allocate sctp_sockaddr_entry with kzalloc for both sctp ipv4 and ipv6 addresses, as does in sctp_v4/6_copy_addrlist(). Reported-by: Alexander Potapenko Signed-off-by: Xin Long Reported-by: syzbot+ae0c70c0c2d40c51bb92@syzkaller.appspotmail.com Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman