kernel.git/net/sctp/proc.c, branch linux-3.10.y

sctp: Add buffer utilization fields to /proc/net/sctp/assocs

2013-04-16T20:43:34Z

sctp: Add buffer utilization fields to /proc/net/sctp/assocs This patch adds the following fields to /proc/net/sctp/assocs output: - sk->sk_wmem_alloc as "wmema" (transmit queue bytes committed) - sk->sk_wmem_queued as "wmemq" (persistent queue size) - sk->sk_sndbuf as "sndbuf" (size of send buffer in bytes) - sk->sk_rcvbuf as "rcvbuf" (size of receive buffer in bytes) When small DATA chunks containing 136 bytes data are sent the TX_QUEUE (assoc->sndbuf_used) reaches a maximum of 40.9% of sk_sndbuf value when peer.rwnd = 0. This was diagnosed from sk_wmem_alloc value reaching maximum value of sk_sndbuf. TX_QUEUE (assoc->sndbuf_used), sk_wmem_alloc and sk_wmem_queued values are incremented in sctp_set_owner_w() for outgoing data chunks. Having access to the above values in /proc/net/sctp/assocs will provide a better understanding of SCTP buffer management. With patch applied, example output when peer.rwnd = 0 where: ASSOC ffff880132298000 is sender ffff880125343000 is receiver ASSOC SOCK STY SST ST HBKT ASSOC-ID TX_QUEUE RX_QUEUE \ ffff880132298000 ffff880124a0a0c0 2 1 3 29325 1 214656 0 \ ffff880125343000 ffff8801237d7700 2 1 3 36210 2 0 524520 \ UID INODE LPORT RPORT LADDRS <-> RADDRS HBINT INS OUTS \ 0 25108 3455 3456 *10.4.8.3 <-> *10.5.8.3 7500 2 2 \ 0 27819 3456 3455 *10.5.8.3 <-> *10.4.8.3 7500 2 2 \ MAXRT T1X T2X RTXC wmema wmemq sndbuf rcvbuf 4 0 0 72 525633 440320 524288 524288 4 0 0 0 1 0 524288 524288 Signed-off-by: Dilip Daya Acked-by: Neil Horman Signed-off-by: David S. Miller

hlist: drop the node parameter from iterators

2013-02-28T03:10:24Z

I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin Acked-by: Paul E. McKenney Signed-off-by: Sasha Levin Cc: Wu Fengguang Cc: Marcelo Tosatti Cc: Gleb Natapov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sctp: Add RCU protection to assoc->transport_addr_list

2012-12-07T19:15:04Z

peer.transport_addr_list is currently only protected by sk_sock which is inpractical to acquire for procfs dumping purposes. This patch adds RCU protection allowing for the procfs readers to enter RCU read-side critical sections. Modification of the list continues to be serialized via sk_lock. V2: Use list_del_rcu() in sctp_association_free() to be safe Skip transports marked dead when dumping for procfs Cc: Vlad Yasevich Cc: Neil Horman Signed-off-by: Thomas Graf Acked-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller

sctp: proc: protect bind_addr->address_list accesses with rcu_read_lock()

2012-12-07T19:15:04Z

address_list is protected via the socket lock or RCU. Since we don't want to take the socket lock for each assoc we dump in procfs a RCU read-side critical section must be entered. V2: Skip local addresses marked as dead Cc: Vlad Yasevich Cc: Neil Horman Signed-off-by: Thomas Graf Acked-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller

sctp: fix /proc/net/sctp/ memory leak

2012-11-15T18:56:05Z

Commit 13d782f ("sctp: Make the proc files per network namespace.") changed the /proc/net/sctp/ struct file_operations opener functions to use single_open_net() and seq_open_net(). Avoid leaking memory by using single_release_net() and seq_release_net() as the release functions. Discovered with Trinity (the syscall fuzzer). Signed-off-by: Tommi Rantala Acked-by: Neil Horman Cc: "Eric W. Biederman" Signed-off-by: David S. Miller

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2012-08-24T22:54:37Z

This is an initial merge in of Eric Biederman's work to start adding user namespace support to the networking. Signed-off-by: David S. Miller

sctp: fix compile issue with disabled CONFIG_NET_NS

2012-08-16T20:36:29Z

struct seq_net_private has no struct net if CONFIG_NET_NS is not enabled Signed-off-by: Ulrich Weber Reviewed-by: "Eric W. Biederman" Signed-off-by: David S. Miller

sctp: Make the mib per network namespace

2012-08-15T06:30:36Z

Signed-off-by: "Eric W. Biederman" Acked-by: Vlad Yasevich Signed-off-by: David S. Miller

sctp: Make the proc files per network namespace.

2012-08-15T06:29:53Z

- Convert all of the files under /proc/net/sctp to be per network namespace. - Don't print anything for /proc/net/sctp/snmp except in the initial network namespaces as the snmp counters still have to be converted to be per network namespace. Signed-off-by: "Eric W. Biederman" Acked-by: Vlad Yasevich Signed-off-by: David S. Miller

userns: Print out socket uids in a user namespace aware fashion.

2012-08-15T04:48:06Z

Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy Cc: Arnaldo Carvalho de Melo Cc: Sridhar Samudrala Acked-by: Vlad Yasevich Acked-by: David S. Miller Acked-by: Serge Hallyn Signed-off-by: Eric W. Biederman