kernel.git/net/rxrpc/conn_object.c, branch linux-5.0.y

rxrpc: Drop the local endpoint arg from rxrpc_extract_addr_from_skb()

2018-10-04T08:32:28Z

rxrpc_extract_addr_from_skb() doesn't use the argument that points to the local endpoint, so remove the argument. Signed-off-by: David Howells

rxrpc: Use IPv4 addresses throught the IPv6

2018-10-04T08:32:28Z

AF_RXRPC opens an IPv6 socket through which to send and receive network packets, both IPv6 and IPv4. It currently turns AF_INET addresses into AF_INET-as-AF_INET6 addresses based on an assumption that this was necessary; on further inspection of the code, however, it turns out that the IPv6 code just farms packets aimed at AF_INET addresses out to the IPv4 code. Fix AF_RXRPC to use AF_INET addresses directly when given them. Fixes: 7b674e390e51 ("rxrpc: Fix IPv6 support") Signed-off-by: David Howells

rxrpc: Fix error distribution

2018-09-28T09:33:17Z

Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells

rxrpc: Make service call handling more robust

2018-09-28T09:32:49Z

Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50eb38 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: David Howells

rxrpc: Fix checks as to whether we should set up a new call

2018-09-28T09:31:20Z

There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED flag in the packet type field rather than in the packet flags field. Fix this by creating a pair of helper functions to check whether the packet is going to the client or to the server and use them generally. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells

rxrpc: Remove dup code from rxrpc_find_connection_rcu()

2018-09-27T14:13:07Z

rxrpc_find_connection_rcu() initialises variable k twice with the same information. Remove one of the initialisations. Signed-off-by: David Howells

atomics/treewide: Rename __atomic_add_unless() => atomic_fetch_add_unless()

2018-06-21T12:22:32Z

While __atomic_add_unless() was originally intended as a building-block for atomic_add_unless(), it's now used in a number of places around the kernel. It's the only common atomic operation named __atomic*(), rather than atomic_*(), and for consistency it would be better named atomic_fetch_add_unless(). This lack of consistency is slightly confusing, and gets in the way of scripting atomics. Given that, let's clean things up and promote it to an official part of the atomics API, in the form of atomic_fetch_add_unless(). This patch converts definitions and invocations over to the new name, including the instrumented version, using the following script: ---- git grep -w __atomic_add_unless | while read line; do sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}"; done git grep -w __arch_atomic_add_unless | while read line; do sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}"; done ---- Note that we do not have atomic{64,_long}_fetch_add_unless(), which will be introduced by later patches. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Reviewed-by: Will Deacon Acked-by: Geert Uytterhoeven Acked-by: Peter Zijlstra (Intel) Acked-by: Palmer Dabbelt Cc: Boqun Feng Cc: Linus Torvalds Cc: Thomas Gleixner Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com Signed-off-by: Ingo Molnar

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-04-03T21:04:18Z

Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...

rxrpc: Fix apparent leak of rxrpc_local objects

2018-03-30T20:05:33Z

rxrpc_local objects cannot be disposed of until all the connections that point to them have been RCU'd as a connection object holds refcount on the local endpoint it is communicating through. Currently, this can cause an assertion failure to occur when a network namespace is destroyed as there's no check that the RCU destructors for the connections have been run before we start trying to destroy local endpoints. The kernel reports: rxrpc: AF_RXRPC: Leaked local 0000000036a41bc1 {5} ------------[ cut here ]------------ kernel BUG at ../net/rxrpc/local_object.c:439! Fix this by keeping a count of the live connections and waiting for it to go to zero at the end of rxrpc_destroy_all_connections(). Fixes: dee46364ce6f ("rxrpc: Add RCU destruction for connections and calls") Signed-off-by: David Howells

rxrpc: Fix checker warnings and errors

2018-03-30T20:05:17Z

Fix various issues detected by checker. Errors: (*) rxrpc_discard_prealloc() should be using rcu_assign_pointer to set call->socket. Warnings: (*) rxrpc_service_connection_reaper() should be passing NULL rather than 0 to trace_rxrpc_conn() as the where argument. (*) rxrpc_disconnect_client_call() should get its net pointer via the call->conn rather than call->sock to avoid a warning about accessing an RCU pointer without protection. (*) Proc seq start/stop functions need annotation as they pass locks between the functions. False positives: (*) Checker doesn't correctly handle of seq-retry lock context balance in rxrpc_find_service_conn_rcu(). (*) Checker thinks execution may proceed past the BUG() in rxrpc_publish_service_conn(). (*) Variable length array warnings from SKCIPHER_REQUEST_ON_STACK() in rxkad.c. Signed-off-by: David Howells