kernel.git/net/mpls, branch linux-4.19.y

net: mpls: fix stale pointer if allocation fails during device rename

2023-02-22T11:47:21Z

commit fda6c89fe3d9aca073495a664e1d5aea28cd4377 upstream. lianhui reports that when MPLS fails to register the sysctl table under new location (during device rename) the old pointers won't get overwritten and may be freed again (double free). Handle this gracefully. The best option would be unregistering the MPLS from the device completely on failure, but unfortunately mpls_ifdown() can fail. So failing fully is also unreliable. Another option is to register the new table first then only remove old one if the new one succeeds. That requires more code, changes order of notifications and two tables may be visible at the same time. sysctl point is not used in the rest of the code - set to NULL on failures and skip unregister if already NULL. Reported-by: lianhui tang Fixes: 0fae3bf018d9 ("mpls: handle device renames for per-device sysctls") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mpls: Fix notifications when deleting a device

2021-12-08T07:50:13Z

commit 7d4741eacdefa5f0475431645b56baf00784df1f upstream. There are various problems related to netlink notifications for mpls route changes in response to interfaces being deleted: * delete interface of only nexthop DELROUTE notification is missing RTA_OIF attribute * delete interface of non-last nexthop NEWROUTE notification is missing entirely * delete interface of last nexthop DELROUTE notification is missing nexthop All of these problems stem from the fact that existing routes are modified in-place before sending a notification. Restructure mpls_ifdown() to avoid changing the route in the DELROUTE cases and to create a copy in the NEWROUTE case. Fixes: f8efb73c97e2 ("mpls: multipath route support") Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0

2021-03-17T15:43:43Z

commit d348ede32e99d3a04863e9f9b28d224456118c27 upstream. A packet with skb_inner_network_header(skb) == skb_network_header(skb) and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers from the packet. Subsequently, the call to skb_mac_gso_segment will again call mpls_gso_segment with the same packet leading to an infinite loop. In addition, ensure that the header length is a multiple of four, which should hold irrespective of the number of stacked labels. Signed-off-by: Balazs Nemeth Acked-by: Willem de Bruijn Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup

2020-04-29T14:31:17Z

commit 6c8991f41546c3c472503dff1ea9daaddf9331c2 upstream. ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller [bwh: Backported to 4.19: - Drop change in lwt_bpf.c - Delete now-unused "ret" in mlx5e_route_lookup_ipv6() - Initialise "out_dev" in mlx5e_create_encap_header_ipv6() to avoid introducing a spurious "may be used uninitialised" warning - Adjust filenames, context, indentation] Signed-off-by: Ben Hutchings Signed-off-by: Sasha Levin

mpls: fix warning with multi-label encap

2020-01-27T13:50:54Z

[ Upstream commit 2f3f7d1fa0d1039b24a55d127ed190f196fc3e79 ] If you configure a route with multiple labels, e.g. ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4 A warning is logged: kernel: [ 130.561819] netlink: 'ip': attribute type 1 has an invalid length. This happens because mpls_iptunnel_policy has set the type of MPLS_IPTUNNEL_DST to fixed size NLA_U32. Change it to a minimum size. nla_get_labels() does the remaining validation. Fixes: e3e4712ec096 ("mpls: ip tunnel support") Signed-off-by: George Wilkie Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

mpls: Return error for RTA_GATEWAY attribute

2019-03-10T06:17:19Z

[ Upstream commit be48220edd48ca0d569782992840488a52373a24 ] MPLS does not support nexthops with an MPLS address family. Specifically, it does not handle RTA_GATEWAY attribute. Make it clear by returning an error. Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mpls: allow routes on ip6gre devices

2018-09-24T19:19:27Z

Summary: This appears to be necessary and sufficient change to enable `MPLS` on `ip6gre` tunnels (RFC4023). This diff allows IP6GRE devices to be recognized by MPLS kernel module and hence user can configure interface to accept packets with mpls headers as well setup mpls routes on them. Test Plan: Test plan consists of multiple containers connected via GRE-V6 tunnel. Then carrying out testing steps as below. - Carry out necessary sysctl settings on all containers ``` sysctl -w net.mpls.platform_labels=65536 sysctl -w net.mpls.ip_ttl_propagate=1 sysctl -w net.mpls.conf.lo.input=1 ``` - Establish IP6GRE tunnels ``` ip -6 tunnel add name if_1_2_1 mode ip6gre \ local 2401:db00:21:6048:feed:0::1 \ remote 2401:db00:21:6048:feed:0::2 key 1 ip link set dev if_1_2_1 up sysctl -w net.mpls.conf.if_1_2_1.input=1 ip -4 addr add 169.254.0.2/31 dev if_1_2_1 scope link ip -6 tunnel add name if_1_3_1 mode ip6gre \ local 2401:db00:21:6048:feed:0::1 \ remote 2401:db00:21:6048:feed:0::3 key 1 ip link set dev if_1_3_1 up sysctl -w net.mpls.conf.if_1_3_1.input=1 ip -4 addr add 169.254.0.4/31 dev if_1_3_1 scope link ``` - Install MPLS encap rules on node-1 towards node-2 ``` ip route add 192.168.0.11/32 nexthop encap mpls 32/64 \ via inet 169.254.0.3 dev if_1_2_1 ``` - Install MPLS forwarding rules on node-2 and node-3 ``` // node2 ip -f mpls route add 32 via inet 169.254.0.7 dev if_2_4_1 // node3 ip -f mpls route add 64 via inet 169.254.0.12 dev if_4_3_1 ``` - Ping 192.168.0.11 (node4) from 192.168.0.1 (node1) (where routing towards 192.168.0.1 is via IP route directly towards node1 from node4) ``` ping 192.168.0.11 ``` - tcpdump on interface to capture ping packets wrapped within MPLS header which inturn wrapped within IP6GRE header ``` 16:43:41.121073 IP6 2401:db00:21:6048:feed::1 > 2401:db00:21:6048:feed::2: DSTOPT GREv0, key=0x1, length 100: MPLS (label 32, exp 0, ttl 255) (label 64, exp 0, [S], ttl 255) IP 192.168.0.1 > 192.168.0.11: ICMP echo request, id 1208, seq 45, length 64 0x0000: 6000 2cdb 006c 3c3f 2401 db00 0021 6048 `.,..l Signed-off-by: David S. Miller

mpls: remove trailing whitepace

2018-07-24T21:10:42Z

Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len

2018-03-04T22:49:17Z

If you take a GSO skb, and split it into packets, will the network length (L3 headers + L4 headers + payload) of those packets be small enough to fit within a given MTU? skb_gso_validate_mtu gives you the answer to that question. However, we recently added to add a way to validate the MAC length of a split GSO skb (L2+L3+L4+payload), and the names get confusing, so rename skb_gso_validate_mtu to skb_gso_validate_network_len Signed-off-by: Daniel Axtens Reviewed-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller

mpls, nospec: Sanitize array index in mpls_label_ok()

2018-02-08T20:24:12Z

mpls_label_ok() validates that the 'platform_label' array index from a userspace netlink message payload is valid. Under speculation the mpls_label_ok() result may not resolve in the CPU pipeline until after the index is used to access an array element. Sanitize the index to zero to prevent userspace-controlled arbitrary out-of-bounds speculation, a precursor for a speculative execution side channel vulnerability. Cc: Cc: "David S. Miller" Cc: Eric W. Biederman Signed-off-by: Dan Williams Signed-off-by: David S. Miller