kernel.git/net/mac80211, branch linux-rolling-stable

wifi: mac80211: set default WMM parameters on all links

2026-03-19T15:14:46Z

[ Upstream commit 2259d14499d16b115ef8d5d2ddc867e2be7cb5b5 ] Currently, mac80211 only initializes default WMM parameters on the deflink during do_open(). For MLO cases, this leaves the additional links without proper WMM defaults if hostapd does not supply per-link WMM parameters, leading to inconsistent QoS behavior across links. Set default WMM parameters for each link during ieee80211_vif_update_links(), because this ensures all individual links in an MLD have valid WMM settings during bring-up and behave consistently across different BSS. Signed-off-by: Ramanathan Choodamani Signed-off-by: Aishwarya R Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()

2026-03-12T11:09:34Z

commit 017c1792525064a723971f0216e6ef86a8c7af11 upstream. In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced at lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); The mesh_matches_local() check above only validates the Mesh ID, Mesh Configuration, and Supported Rates IEs. It does not verify the presence of the Mesh Channel Switch Parameters IE (element ID 118). When a received CSA action frame omits that IE, ieee802_11_parse_elems() leaves elems->mesh_chansw_params_ie as NULL, and the unconditional dereference causes a kernel NULL pointer dereference. A remote mesh peer with an established peer link (PLINK_ESTAB) can trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame that includes a matching Mesh ID and Mesh Configuration IE but omits the Mesh Channel Switch Parameters IE. No authentication beyond the default open mesh peering is required. Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000 Fix by adding a NULL check for mesh_chansw_params_ie after mesh_matches_local() returns, consistent with how other optional IEs are guarded throughout the mesh code. The bug has been present since v3.13 (released 2014-01-19). Fixes: 8f2535b92d68 ("mac80211: process the CSA frame for mesh accordingly") Cc: stable@vger.kernel.org Signed-off-by: Vahagn Vardanian Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration

2026-03-12T11:09:34Z

commit 162d331d833dc73a3e905a24c44dd33732af1fc5 upstream. link_id is taken from the ML Reconfiguration element (control & 0x000f), so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS (15) elements, so index 15 is out-of-bounds. Skip subelements with link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds write. Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element") Reported-by: Ariel Silver Signed-off-by: Ariel Silver Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260220101129.1202657-1-Ariel.Silver@cybereason.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: mac80211: correctly decode TTLM with default link map

2026-01-29T10:46:43Z

TID-To-Link Mapping (TTLM) elements do not contain any link mapping presence indicator if a default mapping is used and parsing needs to be skipped. Note that access points should not explicitly report an advertised TTLM with a default mapping as that is the implied mapping if the element is not included, this is even the case when switching back to the default mapping. However, mac80211 would incorrectly parse the frame and would also read one byte beyond the end of the element. Reported-by: Ruikai Peng Closes: https://lore.kernel.org/linux-wireless/CAFD3drMqc9YWvTCSHLyP89AOpBZsHdZ+pak6zVftYoZcUyF7gw@mail.gmail.com Fixes: 702e80470a33 ("wifi: mac80211: support handling of advertised TID-to-link mapping") Signed-off-by: Benjamin Berg Link: https://patch.msgid.link/20260129113349.d6b96f12c732.I69212a50f0f70db185edd3abefb6f04d3cb3e5ff@changeid Signed-off-by: Johannes Berg

wifi: mac80211: apply advertised TTLM from association response

2026-01-20T09:02:01Z

When the AP has a disabled link that the station can include in the association, the fact that the link is dormant needs to be advertised in the TID to Link Mapping (TTLM). Section 35.3.7.2.3 ("Negotiation of TTLM") of Draft P802.11REVmf_D1.0 also states that the mapping needs to be included in the association response frame. As such, we can simply rely on the TTLM from the association response. Before this change mac80211 would not properly track that an advertised TTLM was effectively active, resulting in it not enabling the link once it became available again. For the link reconfiguration case, the data was not used at all. This behaviour is actually correct because Draft P802.11REVmf_D1.0 states in section 35.3.6.4 that we "shall operate with all the TIDs mapped to the newly added links ..." Fixes: 6d543b34dbcf ("wifi: mac80211: Support disabled links during association") Signed-off-by: Benjamin Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20260118093904.43c861424543.I067f702ac46b84ac3f8b4ea16fb0db9cbbfae7e2@changeid Signed-off-by: Johannes Berg

wifi: mac80211: parse all TTLM entries

2026-01-20T09:02:01Z

For the follow up patch, we need to properly parse TTLM entries that do not have a switch time. Change the logic so that ieee80211_parse_adv_t2l returns usable values in all non-error cases. Before the values filled in were technically incorrect but enough for ieee80211_process_adv_ttlm. Signed-off-by: Benjamin Berg Reviewed-by: Johannes Berg Reviewed-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20260118093904.ccd324e2dd59.I69f0bee0a22e9b11bb95beef313e305dab17c051@changeid Signed-off-by: Johannes Berg

wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice

2026-01-20T09:01:43Z

In reconfig, in case the driver asks to disconnect during the reconfig, all the keys of the interface are marked as tainted. Then ieee80211_reenable_keys will loop over all the interface keys, and for each one it will a) increment crypto_tx_tailroom_needed_cnt b) call ieee80211_key_enable_hw_accel, which in turn will detect that this key is tainted, so it will mark it as "not in hardware", which is paired with crypto_tx_tailroom_needed_cnt incrementation, so we get two incrementations for each tainted key. Then we get a warning in ieee80211_free_keys. To fix it, don't increment the count in ieee80211_reenable_keys for tainted keys Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20260118092821.4ca111fddcda.Id6e554f4b1c83760aa02d5a9e4e3080edb197aa2@changeid Signed-off-by: Johannes Berg

wifi: mac80211: don't perform DA check on S1G beacon

2026-01-20T09:01:02Z

S1G beacons don't contain the DA field as per IEEE80211-2024 9.3.4.3, so the DA broadcast check reads the SA address of the S1G beacon which will subsequently lead to the beacon being dropped. As a result, passive scanning is not possible. Fix this by only performing the check on non-S1G beacons to allow S1G long beacons to be processed during a passive scan. Fixes: ddf82e752f8a ("wifi: mac80211: Allow beacons to update BSS table regardless of scan") Signed-off-by: Lachlan Hodges Link: https://patch.msgid.link/20260120031122.309942-1-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg

wifi: mac80211: correctly check if CSA is active

2026-01-12T18:36:18Z

We are not adding an interface if an existing one is doing CSA. But the check won't work for MLO station interfaces, since for those, vif->bss_conf is zeroed out. Fix this by checking if any link of the vif has an active CSA. Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20260111191912.7ceff62fc561.Ia38d27f42684d1cfd82d930d232bd5dea6ab9282@changeid Signed-off-by: Johannes Berg

wifi: mac80211: collect station statistics earlier when disconnect

2026-01-08T12:33:11Z

In __sta_info_destroy_part2(), station statistics are requested after the IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is problematic because the driver may be unable to handle the request due to the STA being in the NOTEXIST state (i.e. if the driver destroys the underlying data when transitioning to NOTEXIST). Move the statistics collection to before the state transition to avoid this issue. Signed-off-by: Baochen Qiang Link: https://patch.msgid.link/20251222-mac80211-move-station-stats-collection-earlier-v1-1-12cd4e42c633@oss.qualcomm.com Signed-off-by: Johannes Berg