kernel.git/net/mac80211, branch linux-5.16.y

mac80211: limit bandwidth in HE capabilities

2022-04-08T12:06:03Z

[ Upstream commit 1f2c104448477512fcf7296df54bfbc3a6f9a765 ] If we're limiting bandwidth for some reason such as regulatory restrictions, then advertise that limitation just like we do for VHT today, so the AP is aware we cannot use the higher BW it might be using. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

mac80211: Remove a couple of obsolete TODO

2022-04-08T12:06:03Z

[ Upstream commit cee04f3c3a00ffd2a2a6ed1028e0ab58a3a28d25 ] The HE capability IE is an extension IE so remove an irrelevant comments. Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20211129152938.550b95b5fca7.Ia31395e880172aefcc0a8c70ed060f84b94bdb83@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

mac80211: fix potential double free on mesh join

2022-03-28T07:59:56Z

commit 4a2d4496e15ea5bb5c8e83b94ca8ca7fb045e7d3 upstream. While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE. Cc: stable@vger.kernel.org Fixes: 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") Reported-by: Matthias Kretschmer Signed-off-by: Linus Lüssing Tested-by: Mathias Kretschmer Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: refuse aggregations sessions before authorized

2022-03-19T12:48:42Z

[ Upstream commit a6bce78262f5dd4b50510f0aa47f3995f7b185f3 ] If an MFP station isn't authorized, the receiver will (or at least should) drop the action frame since it's a robust management frame, but if we're not authorized we haven't installed keys yet. Refuse attempts to start a session as they'd just time out. Signed-off-by: Johannes Berg Link: https://lore.kernel.org/r/20220203201528.ff4d5679dce9.I34bb1f2bc341e161af2d6faf74f91b332ba11285@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

mac80211: treat some SAE auth steps as final

2022-03-08T18:14:10Z

commit 94d9864cc86f572f881db9b842a78e9d075493ae upstream. When we get anti-clogging token required (added by the commit mentioned below), or the other status codes added by the later commit 4e56cde15f7d ("mac80211: Handle special status codes in SAE commit") we currently just pretend (towards the internal state machine of authentication) that we didn't receive anything. This has the undesirable consequence of retransmitting the prior frame, which is not expected, because the timer is still armed. If we just disarm the timer at that point, it would result in the undesirable side effect of being in this state indefinitely if userspace crashes, or so. So to fix this, reset the timer and set a new auth_data->waiting in order to have no more retransmissions, but to have the data destroyed when the timer actually fires, which will only happen if userspace didn't continue (i.e. crashed or abandoned it.) Fixes: a4055e74a2ff ("mac80211: Don't destroy auth data in case of anti-clogging") Reported-by: Jouni Malinen Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: fix forwarded mesh frames AC & queue selection

2022-03-08T18:14:10Z

commit 859ae7018316daa4adbc496012dcbbb458d7e510 upstream. There are two problems with the current code that have been highlighted with the AQL feature that is now enbaled by default. First problem is in ieee80211_rx_h_mesh_fwding(), ieee80211_select_queue_80211() is used on received packets to choose the sending AC queue of the forwarding packet although this function should only be called on TX packet (it uses ieee80211_tx_info). This ends with forwarded mesh packets been sent on unrelated random AC queue. To fix that, AC queue can directly be infered from skb->priority which has been extracted from QOS info (see ieee80211_parse_qos()). Second problem is the value of queue_mapping set on forwarded mesh frames via skb_set_queue_mapping() is not the AC of the packet but a hardware queue index. This may or may not work depending on AC to HW queue mapping which is driver specific. Both of these issues lead to improper AC selection while forwarding mesh packets but more importantly due to improper airtime accounting (which is done on a per STA, per AC basis) caused traffic stall with the introduction of AQL. Fixes: cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding") Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") Co-developed-by: Remi Pommarel Signed-off-by: Remi Pommarel Signed-off-by: Nicolas Escande Link: https://lore.kernel.org/r/20220214173214.368862-1-nico.escande@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: fix EAPoL rekey fail in 802.3 rx path

2022-03-08T18:14:07Z

commit 610d086d6df0b15c3732a7b4a5b0f1c3e1b84d4c upstream. mac80211 set capability NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211 to upper layer by default. That means we should pass EAPoL packets through nl80211 path only, and should not send the EAPoL skb to netdevice diretly. At the meanwhile, wpa_supplicant would not register sock to listen EAPoL skb on the netdevice. However, there is no control_port_protocol handler in mac80211 for 802.3 RX packets, mac80211 driver would pass up the EAPoL rekey frame to netdevice and wpa_supplicant would be never interactive with this kind of packets, if SUPPORTS_RX_DECAP_OFFLOAD is enabled. This causes STA always rekey fail if EAPoL frame go through 802.3 path. To avoid this problem, align the same process as 802.11 type to handle this frame before put it into network stack. This also addresses a potential security issue in 802.3 RX mode that was previously fixed in commit a8c4d76a8dd4 ("mac80211: do not accept/forward invalid EAPOL frames"). Cc: stable@vger.kernel.org # 5.12+ Fixes: 80a915ec4427 ("mac80211: add rx decapsulation offload support") Signed-off-by: Deren Wu Link: https://lore.kernel.org/r/6889c9fced5859ebb088564035f84fd0fa792a49.1644680751.git.deren.wu@mediatek.com [fix typos, update comment and add note about security issue] Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: mlme: check for null after calling kmemdup

2022-02-23T11:05:56Z

commit a72c01a94f1d285a274219d36e2a17b4846c0615 upstream. As the possible failure of the alloc, the ifmgd->assoc_req_ies might be NULL pointer returned from kmemdup(). Therefore it might be better to free the skb and return error in order to fail the association, like ieee80211_assoc_success(). Also, the caller, ieee80211_do_assoc(), needs to deal with the return value from ieee80211_send_assoc(). Fixes: 4d9ec73d2b78 ("cfg80211: Report Association Request frame IEs in association events") Signed-off-by: Jiasheng Jiang Link: https://lore.kernel.org/r/20220105081559.2387083-1-jiasheng@iscas.ac.cn [fix some paths to be errors, not success] Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: allow non-standard VHT MCS-10/11

2022-01-27T11:02:30Z

[ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ] Some AP can possibly try non-standard VHT rate and mac80211 warns and drops packets, and leads low TCP throughput. Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2 WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021 Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11") has added, mac80211 adds this support as well. After this patch, throughput is good and iw can get the bitrate: rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2 or rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2 Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891 Reported-by: Goldwyn Rodrigues Signed-off-by: Ping-Ke Shih Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh

2022-01-04T14:11:49Z

Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was in mesh_paths and mpp_paths being NULL. mesh_pathtbl_init() could fail in case of memory allocation failure, but nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to leaving 2 pointers as NULL. Syzbot has found null deref on exit path, but it could happen anywhere else, because code assumes these pointers are valid. Since all ieee80211_*_setup_sdata functions are void and do not fail, let's embedd mesh_paths and mpp_paths into parent struct to avoid adding error handling on higher levels and follow the pattern of others setup_sdata functions Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable") Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.com Signed-off-by: Johannes Berg