kernel.git/net/mac80211/mesh.c, branch linux-3.18.y

mac80211: Fix addition of mesh configuration element

2017-12-20T09:01:29Z

commit 57629915d568c522ac1422df7bba4bee5b5c7a7c upstream. The code was setting the capabilities byte to zero, after it was already properly set previously. Fix it. The bug was found while debugging hwsim mesh tests failures that happened since the commit mentioned below. Fixes: 76f43b4c0a93 ("mac80211: Remove invalid flag operations in mesh TSF synchronization") Signed-off-by: Ilan Peer Reviewed-by: Masashi Honma Signed-off-by: Johannes Berg Cc: Richard Schütz Cc: Mathias Kretschmer Signed-off-by: Greg Kroah-Hartman

mac80211: Remove invalid flag operations in mesh TSF synchronization

2017-11-30T08:35:55Z

[ Upstream commit 76f43b4c0a9337af22827d78de4f2b8fd5328489 ] mesh_sync_offset_adjust_tbtt() implements Extensible synchronization framework ([1] 13.13.2 Extensible synchronization framework). It shall not operate the flag "TBTT Adjusting subfield" ([1] 8.4.2.100.8 Mesh Capability), since it is used only for MBCA ([1] 13.13.4 Mesh beacon collision avoidance, see 13.13.4.4.3 TBTT scanning and adjustment procedures for detail). So this patch remove the flag operations. [1] IEEE Std 802.11 2012 Signed-off-by: Masashi Honma [remove adjusting_tbtt entirely, since it's now unused] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mac80211: mesh: flush mesh paths unconditionally

2016-06-20T03:47:41Z

[ Upstream commit fe7a7c57629e8dcbc0e297363a9b2366d67a6dc5 ] Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [] ? netif_skb_features+0x14d/0x30a [ 348.530014] [] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [] dev_queue_xmit+0xa/0xc [ 348.530014] [] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [] dev_queue_xmit+0xa/0xc [ 348.530014] [] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [] br_flood+0x77/0x95 [bridge] [ 348.530014] [] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [] ? nf_iterate+0x2b/0x6b [ 348.530014] [] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [] ? resched_curr+0x19/0x37 [ 348.530014] [] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [] __netif_receive_skb+0x47/0x55 [ 348.530014] [] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [] napi_gro_receive+0x3a/0x94 [ 348.530014] [] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [] ? swake_up_locked+0x14/0x26 [ 348.530014] [] net_rx_action+0xde/0x250 [ 348.530014] [] __do_softirq+0x8a/0x163 [ 348.530014] [] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [] do_softirq_own_stack+0x26/0x2c [ 348.530014] [ 348.530014] [] irq_exit+0x31/0x6f [ 348.530014] [] do_IRQ+0x8d/0xa0 [ 348.530014] [] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Cc: stable@vger.kernel.org Reported-by: Fred Veldini Tested-by: Fred Veldini Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

mac80211: Requeue work after scan complete for all VIF types.

2016-02-15T20:42:34Z

[ Upstream commit 4fa11ec726a32ea6dd768dbb2e2af3453a98ec0a ] During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Cc: stable@vger.kernel.org Signed-off-by: Sachin Kulkarni Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

mac80211: use secondary channel offset IE also beacons during CSA

2014-10-29T15:37:45Z

If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg

mac80211: move csa counters from sdata to beacon/presp

2014-06-23T12:22:06Z

Having csa counters part of beacon and probe_resp structures makes it easier to get rid of possible races between setting a beacon and updating counters on SMP systems by guaranteeing counters are always consistent against given beacon struct. While at it relax WARN_ON into WARN_ON_ONCE to prevent spamming logs and racing. Signed-off-by: Michal Kazior [remove pointless array check] Signed-off-by: Johannes Berg

trivial: net/mac80211/mesh.c: fix typo s/Substract/Subtract/

2014-06-23T09:05:29Z

Signed-off-by: Antonio Ospite Cc: Luis Carlos Cobo Cc: Johannes Berg Cc: linux-wireless@vger.kernel.org Signed-off-by: Johannes Berg

mac80211: Support multiple CSA counters

2014-05-15T13:00:58Z

Support up to IEEE80211_MAX_CSA_COUNTERS_NUM csa counters. This is defined to be 2 now, to support both CSA and eCSA counters. Signed-off-by: Andrei Otcheretianski Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg

mac80211: fix mesh_add_rsn_ie IE finding loop

2014-04-22T15:24:49Z

Previously, the code to copy the RSN IE from the mesh config would increment its pointer by one in the loop instead of by the element length, so there was the potential for mistaking another IE's data fields as the RSN IE. cfg80211_find_ie() exists, so just use that. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg

cfg80211/mac80211: refactor cfg80211_chandef_dfs_required()

2014-04-09T08:55:41Z

Some interface types don't require DFS (such as STATION, P2P_CLIENT etc). In order to centralize these decisions, make cfg80211_chandef_dfs_required() take the iftype into consideration. Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg