kernel.git/net/dsa/slave.c, branch linux-5.5.y

net: dsa: fix phylink_start()/phylink_stop() calls

2020-03-18T06:18:55Z

[ Upstream commit 8640f8dc6d657ebfb4e67c202ad32c5457858a13 ] Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: of_get_phy_mode: Change API to solve int/unit warnings

2019-11-04T19:21:25Z

Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-11-02T20:54:56Z

The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller

net: dsa: add ethtool pause configuration support

2019-10-31T00:42:51Z

This patch adds glue logic to make pause settings per port configurable vie ethtool. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: core: add generic lockdep keys

2019-10-24T21:53:48Z

Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

net: dsa: Pass ndo_setup_tc slave callback to drivers

2019-09-16T19:32:57Z

DSA currently handles shared block filters (for the classifier-action qdisc) in the core due to what I believe are simply pragmatic reasons - hiding the complexity from drivers and offerring a simple API for port mirroring. Extend the dsa_slave_setup_tc function by passing all other qdisc offloads to the driver layer, where the driver may choose what it implements and how. DSA is simply a pass-through in this case. Signed-off-by: Vladimir Oltean Acked-by: Kurt Kanzenbach Reviewed-by: Florian Fainelli Acked-by: Ilias Apalodimas Signed-off-by: David S. Miller

net: dsa: Advertise the VLAN offload netdev ability only if switch supports it

2019-08-28T03:46:26Z

When adding a VLAN sub-interface on a DSA slave port, the 8021q core checks NETIF_F_HW_VLAN_CTAG_FILTER and, if the netdev is capable of filtering, calls .ndo_vlan_rx_add_vid or .ndo_vlan_rx_kill_vid to configure the VLAN offloading. DSA sets this up counter-intuitively: it always advertises this netdev feature, but the underlying driver may not actually support VLAN table manipulation. In that case, the DSA core is forced to ignore the error, because not being able to offload the VLAN is still fine - and should result in the creation of a non-accelerated VLAN sub-interface. Change this so that the netdev feature is only advertised for switch drivers that support VLAN manipulation, instead of checking for -EOPNOTSUPP at runtime. Suggested-by: Florian Fainelli Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: clear VLAN PVID flag for CPU port

2019-08-28T03:17:28Z

When the bridge offloads a VLAN on a slave port, we also need to program its dedicated CPU port as a member of the VLAN. Drivers may handle the CPU port's membership as they want. For example, Marvell as a special "Unmodified" mode to pass frames as is through such ports. Even though DSA expects the drivers to handle the CPU port membership, it does not make sense to program user VLANs as PVID on the CPU port. This patch clears this flag before programming the CPU port. Signed-off-by: Vivien Didelot Suggested-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: program VLAN on CPU port from slave

2019-08-28T03:17:28Z

DSA currently programs a VLAN on the CPU port implicitly after the related notifier is received by a switch. While we still need to do this transparent programmation of the DSA links in the fabric, programming the CPU port this way may cause problems in some corners such as the tag_8021q driver. Because the dedicated CPU port is specific to a slave, make their programmation explicit a few layers up, in the slave code. Note that technically, DSA links have a dedicated CPU port as well, but since they are only used as conduit between interconnected switches of a fabric, programming them transparently this way is what we want. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: check bridge VLAN in slave operations

2019-08-28T03:17:27Z

The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is not bridged or if its bridge is not VLAN aware. This is a good thing but other corners of DSA, such as the tag_8021q driver, may need to program VLANs regardless the bridge state. And also because bridge_dev is specific to user ports anyway, move these checks were it belongs, one layer up in the slave code. Signed-off-by: Vivien Didelot Suggested-by: Vladimir Oltean Signed-off-by: David S. Miller