kernel.git/net/dsa/Kconfig, branch linux-5.14.y

net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver

2021-11-17T10:04:38Z

[ Upstream commit deab6b1cd9789bb9bd466d5e76aecb8b336259b4 ] As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: tag_sja1105: optionally build as module when switch driver is module if PTP is enabled

2021-09-15T08:02:18Z

[ Upstream commit f8b17a0bd96065e4511858689916bb729dbb881b ] TX timestamps are sent by SJA1110 as Ethernet packets containing metadata, so they are received by the tagging driver but must be processed by the switch driver - the one that is stateful since it keeps the TX timestamp queue. This means that there is an sja1110_process_meta_tstamp() symbol exported by the switch driver which is called by the tagging driver. There is a shim definition for that function when the switch driver is not compiled, which does nothing, but that shim is not effective when the tagging protocol driver is built-in and the switch driver is a module, because built-in code cannot call symbols exported by modules. So add an optional dependency between the tagger and the switch driver, if PTP support is enabled in the switch driver. If PTP is not enabled, sja1110_process_meta_tstamp() will translate into the shim "do nothing with these meta frames" function. Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Reported-by: Arnd Bergmann Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: build tag_8021q.c as part of DSA core

2021-09-15T08:02:18Z

[ Upstream commit 8b6e638b4be2ad77f61fb93b4e1776c6ccc2edab ] Upcoming patches will add tag_8021q related logic to switch.c and port.c, in order to allow it to make use of cross-chip notifiers. In addition, a struct dsa_8021q_context *ctx pointer will be added to struct dsa_switch. It seems fairly low-reward to #ifdef the *ctx from struct dsa_switch and to provide shim implementations of the entire tag_8021q.c calling surface (not even clear what to do about the tag_8021q cross-chip notifiers to avoid compiling them). The runtime overhead for switches which don't use tag_8021q is fairly small because all helpers will check for ds->tag_8021q_ctx being a NULL pointer and stop there. So let's make it part of dsa_core.o. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: selftest: fix build issue if INET is disabled

2021-04-28T21:06:45Z

In case ethernet driver is enabled and INET is disabled, selftest will fail to build. Reported-by: Randy Dunlap Fixes: 3e1e58d64c3d ("net: add generic selftest support") Signed-off-by: Oleksij Rempel Acked-by: Randy Dunlap # build-tested Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: mscc: ocelot: support PTP Sync one-step timestamping

2021-04-27T21:10:15Z

Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp configuration, the PTP Sync one-step timestamping had never been supported. This patch is to truely support it. - ocelot_port_txtstamp_request() This function handles tx timestamp request by storing ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd, and additionally for two-step timestamp storing ts_id in OCELOT_SKB_CB(clone)->ptp_cmd. - ocelot_ptp_rew_op() During xmit, this function is called to get rew_op (rewriter option) by checking skb->cb for tx timestamp request, and configure to transmitting. Non-onestep-Sync packet with one-step timestamp request falls back to use two-step timestamp. Signed-off-by: Yangbo Lu Acked-by: Richard Cochran Signed-off-by: David S. Miller

net: dsa: enable selftest support for all switches by default

2021-04-20T23:08:02Z

Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

dsa: simplify Kconfig symbols and dependencies

2021-03-22T19:15:37Z

1. Remove CONFIG_HAVE_NET_DSA. CONFIG_HAVE_NET_DSA is a legacy leftover from the times when drivers should have selected CONFIG_NET_DSA manually. Currently, all drivers has explicit 'depends on NET_DSA', so this is no more needed. 2. CONFIG_HAVE_NET_DSA dependencies became CONFIG_NET_DSA's ones. - dropped !S390 dependency which was introduced to be sure NET_DSA can select CONFIG_PHYLIB. DSA migrated to Phylink almost 3 years ago and the PHY library itself doesn't depend on !S390 since commit 870a2b5e4fcd ("phylib: remove !S390 dependeny from Kconfig"); - INET dependency is kept to be sure we can select NET_SWITCHDEV; - NETDEVICES dependency is kept to be sure we can select PHYLINK. 3. DSA drivers menu now depends on NET_DSA. Instead on 'depends on NET_DSA' on every single driver, the entire menu now depends on it. This eliminates a lot of duplicated lines from Kconfig with no loss (when CONFIG_NET_DSA=m, drivers also can be only m or n). This also has a nice side effect that there's no more empty menu on configurations without DSA. 4. Kbuild will now descend into 'drivers/net/dsa' only when CONFIG_NET_DSA is y or m. This is safe since no objects inside this folder can be built without DSA core, as well as when CONFIG_NET_DSA=m, no objects can be built-in. Signed-off-by: Alexander Lobakin Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: tag_brcm: add support for legacy tags

2021-03-17T19:24:36Z

Add support for legacy Broadcom tags, which are similar to DSA_TAG_PROTO_BRCM. These tags are used on BCM5325, BCM5365 and BCM63xx switches. Signed-off-by: Álvaro Fernández Rojas Signed-off-by: David S. Miller

net: dsa: tag_ocelot_8021q: fix driver dependency

2021-02-26T23:29:53Z

When the ocelot driver code is in a library, the dsa tag code cannot be built-in: ld.lld: error: undefined symbol: ocelot_can_inject >>> referenced by tag_ocelot_8021q.c >>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a ld.lld: error: undefined symbol: ocelot_port_inject_frame >>> referenced by tag_ocelot_8021q.c >>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a Building the tag support only really makes sense for compile-testing when the driver is available, so add a Kconfig dependency that prevents the broken configuration while allowing COMPILE_TEST alternative when MSCC_OCELOT_SWITCH_LIB is disabled entirely. This case is handled through the #ifdef check in include/soc/mscc/ocelot.h. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Arnd Bergmann Acked-by: Vladimir Oltean Link: https://lore.kernel.org/r/20210225143910.3964364-2-arnd@kernel.org Signed-off-by: Jakub Kicinski

net: dsa: Fix dependencies with HSR

2021-02-23T02:50:42Z

The core DSA framework uses hsr_is_master() which would not resolve to a valid symbol if HSR is built-into the kernel and DSA is a module. Fixes: 18596f504a3e ("net: dsa: add support for offloading HSR") Reported-by: kernel test robot Signed-off-by: Florian Fainelli Reviewed-by: George McCollister Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean Link: https://lore.kernel.org/r/20210220051222.15672-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski