kernel.git/net/dccp/options.c, branch linux-2.6.37.y

dccp: schedule an Ack when receiving timestamps

2010-10-12T04:57:43Z

This schedules an Ack when receiving a timestamp, exploiting the existing inet_csk_schedule_ack() function, saving one case in the `dccp_ack_pending()' function. Signed-off-by: Gerrit Renker

dccp: Kill dead code and add static markers.

2010-10-07T06:12:07Z

Remove dead code and make some functions static. Compile tested only. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

dccp: Replace magic CCID-specific numbers by symbolic constants

2010-09-21T10:14:25Z

The constants DCCPO_{MIN,MAX}_CCID_SPECIFIC are nowhere used in the code, but instead for the CCID-specific options numbers are used. This patch unifies the use of CCID-specific option numbers, by adding symbolic names reflecting the definitions in RFC 4340, 10.3. Signed-off-by: Gerrit Renker

dccp: Add packet type information to CCID-specific option parsing

2010-09-21T10:14:25Z

This 1. adds packet type information to ccid_hc_{rx,tx}_parse_options(). This is necessary, since table 3 in RFC 4340, 5.8 leaves it to the CCIDs to state which options may (not) appear on what packet type. 2. adds such a check for CCID-3's {Loss Event, Receive} Rate as specified in RFC 4340 8.3 ("Receive Rate options MUST NOT be sent on DCCP-Data packets") and 8.5 ("Loss Event Rate options MUST NOT be sent on DCCP-Data packets"). 3. removes an unused argument `idx' from ccid_hc_{rx,tx}_parse_options(). This is also no longer necessary, since the CCID-specific option-parsing routines are passed every single parameter of the type-length-value option encoding. Signed-off-by: Gerrit Renker

dccp: make implementation of Syn-RTT symmetric

2010-06-26T04:33:15Z

This patch is thanks to Andre Noll who reported the issue and helped testing. The Syn-RTT sampled during the initial handshake currently only works for the client sending the DCCP-Request. TFRC penalizes the absence of an RTT sample with a very slow initial speed (1 packet per second), which delays slow-start significantly, resulting in sluggish performance. This patch mirrors the "Syn RTT" principle by adding a timestamp also onto the DCCP-Response, producing an RTT sample when the (Data)Ack completing the handshake arrives. Also changed the documentation to 'TFRC' since Syn RTTs are also used by CCID-4. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller

dccp: remove unused function argument

2010-06-26T04:33:14Z

This removes an unused 'sk' argument from several option-inserting functions. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller

kernel-wide: replace USHORT_MAX, SHORT_MAX and SHORT_MIN with USHRT_MAX, SHRT_MAX and SHRT_MIN

2010-05-25T15:07:02Z

- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not USHORT_MAX/SHORT_MAX/SHORT_MIN. - Make SHRT_MIN of type s16, not int, for consistency. [akpm@linux-foundation.org: fix drivers/dma/timb_dma.c] [akpm@linux-foundation.org: fix security/keys/keyring.c] Signed-off-by: Alexey Dobriyan Acked-by: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dccp: Debugging functions for feature negotiation

2009-01-21T22:34:05Z

Since all feature-negotiation processing now takes place in feat.c, functions for producing verbose debugging output are concentrated there. New functions to print out values, entry records, and options are provided, and also a macro is defined to not always have the function name in the output line. Thanks a lot to Wei Yongjun and Giuseppe Galeota for help and discussion with an earlier revision of this patch. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller

dccp: Initialisation and type-checking of feature sysctls

2009-01-21T22:34:05Z

This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly impact the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Notes: ------ 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in other places, sometimes with exactly the same kind of definitions (e.g. "static int zero;"). It may be a good idea (kernel janitors?) to consolidate type checking. For the sake of keeping the changeset small and in order not to affect other subsystems, I have not strived to generalise here. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller

dccp ccid-2: Phase out the use of boolean Ack Vector sysctl

2008-12-08T09:19:06Z

This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, as it now is handled fully dynamically via feature negotiation (i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. There was a FIXME to change the error code when dccp_ackvec_add() fails. I removed this after finding out that: * the check whether ackno < ISN is already made earlier, * this Response is likely the 1st packet with an Ackno that the client gets, * so when dccp_ackvec_add() fails, the reason is likely not a packet error. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller