kernel.git/net/bridge/br_input.c, branch linux-4.14.y

net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.

2022-05-25T06:41:20Z

[ Upstream commit fbb3abdf2223cd0dfc07de85fe5a43ba7f435bdf ] It is possible to stack bridges on top of each other. Consider the following which makes use of an Ethernet switch: br1 / \ / \ / \ br0.11 wlan0 | br0 / | \ p1 p2 p3 br0 is offloaded to the switch. Above br0 is a vlan interface, for vlan 11. This vlan interface is then a slave of br1. br1 also has a wireless interface as a slave. This setup trunks wireless lan traffic over the copper network inside a VLAN. A frame received on p1 which is passed up to the bridge has the skb->offload_fwd_mark flag set to true, indicating that the switch has dealt with forwarding the frame out ports p2 and p3 as needed. This flag instructs the software bridge it does not need to pass the frame back down again. However, the flag is not getting reset when the frame is passed upwards. As a result br1 sees the flag, wrongly interprets it, and fails to forward the frame to wlan0. When passing a frame upwards, clear the flag. This is the Rx equivalent of br_switchdev_frame_unmark() in br_dev_xmit(). Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark") Signed-off-by: Andrew Lunn Reviewed-by: Ido Schimmel Tested-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: bridge: fix per-port af_packet sockets

2019-04-27T07:35:33Z

[ Upstream commit 3b2e2904deb314cc77a2192f506f2fd44e3d10d0 ] When the commit below was introduced it changed two visible things: - the skb was no longer passed through the protocol handlers with the original device - the skb was passed up the stack with skb->dev = bridge The first change broke af_packet sockets on bridge ports. For example we use them for hostapd which listens for ETH_P_PAE packets on the ports. We discussed two possible fixes: - create a clone and pass it through NF_HOOK(), act on the original skb based on the result - somehow signal to the caller from the okfn() that it was called, meaning the skb is ok to be passed, which this patch is trying to implement via returning 1 from the bridge link-local okfn() Note that we rely on the fact that NF_QUEUE/STOLEN would return 0 and drop/error would return < 0 thus the okfn() is called only when the return was 1, so we signal to the caller that it was called by preserving the return value from nf_hook(). Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bridge: fix dest lookup when vlan proto doesn't match

2017-07-14T15:19:23Z

With 802.1ad support the vlan_ingress code started checking for vlan protocol mismatch which causes the current tag to be inserted and the bridge vlan protocol & pvid to be set. The vlan tag insertion changes the skb mac_header and thus the lookup mac dest pointer which was loaded prior to calling br_allowed_ingress in br_handle_frame_finish is VLAN_HLEN bytes off now, pointing to the last two bytes of the destination mac and the first four of the source mac causing lookups to always fail and broadcasting all such packets to all ports. Same thing happens for locally originated packets when passing via br_dev_xmit. So load the dest pointer after the vlan checks and possible skb change. Fixes: 8580e2117c06 ("bridge: Prepare for 802.1ad vlan filtering support") Reported-by: Anitha Narasimha Murthy Signed-off-by: Nikolay Aleksandrov Acked-by: Toshiaki Makita Signed-off-by: David S. Miller

bridge: drop netfilter fake rtable unconditionally

2017-03-13T20:01:10Z

Andreas reports kernel oops during rmmod of the br_netfilter module. Hannes debugged the oops down to a NULL rt6info->rt6i_indev. Problem is that br_netfilter has the nasty concept of adding a fake rtable to skb->dst; this happens in a br_netfilter prerouting hook. A second hook (in bridge LOCAL_IN) is supposed to remove these again before the skb is handed up the stack. However, on module unload hooks get unregistered which means an skb could traverse the prerouting hook that attaches the fake_rtable, while the 'fake rtable remove' hook gets removed from the hooklist immediately after. Fixes: 34666d467cbf1e2e3c7 ("netfilter: bridge: move br_netfilter out of the core") Reported-by: Andreas Karis Debugged-by: Hannes Frederic Sowa Signed-off-by: Florian Westphal Acked-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

bridge: fdb: converge fdb searching functions into one

2017-02-14T17:41:02Z

Before this patch we had 3 different fdb searching functions which was confusing. This patch reduces all of them to one - fdb_find_rcu(), and two flavors: br_fdb_find() which requires hash_lock and br_fdb_find_rcu which requires RCU. This makes it clear what needs to be used, we also remove two abusers of __br_fdb_get which called it under hash_lock and replace them with br_fdb_find(). Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: avoid unnecessary read of jiffies

2017-02-07T19:16:05Z

Jiffies is volatile so read it once. Signed-off-by: Stephen Hemminger Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: fdb: write to used and updated at most once per jiffy

2017-02-07T03:53:13Z

Writing once per jiffy is enough to limit the bridge's false sharing. After this change the bridge doesn't show up in the local load HitM stats. Suggested-by: David S. Miller Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: vlan dst_metadata hooks in ingress and egress paths

2017-02-03T20:21:22Z

- ingress hook: - if port is a tunnel port, use tunnel info in attached dst_metadata to map it to a local vlan - egress hook: - if port is a tunnel port, use tunnel info attached to vlan to set dst_metadata on the skb CC: Nikolay Aleksandrov Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-09-12T22:52:44Z

Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller

net: bridge: change unicast boolean to exact pkt_type

2016-09-02T05:48:33Z

Remove the unicast flag and introduce an exact pkt_type. That would help us for the upcoming per-port multicast flood flag and also slightly reduce the tests in the input fast path. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller