kernel.git/kernel/trace/blktrace.c, branch linux-5.7.y

blktrace: fix debugfs use after free

2020-08-19T06:23:27Z

[ Upstream commit bad8e64fb19d3a0de5e564d9a7271c31bd684369 ] On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory") Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com Signed-off-by: Luis Chamberlain Reviewed-by: Christoph Hellwig Cc: Bart Van Assche Cc: Omar Sandoval Cc: Hannes Reinecke Cc: Nicolai Stange Cc: Greg Kroah-Hartman Cc: Michal Hocko Cc: "Martin K. Petersen" Cc: "James E.J. Bottomley" Cc: yu kuai Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blktrace: break out of blktrace setup on concurrent calls

2020-06-30T19:36:18Z

[ Upstream commit 1b0b283648163dae2a214ca28ed5a99f62a77319 ] We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain Signed-off-by: Jan Kara Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blktrace: fix endianness for blk_log_remap()

2020-06-24T15:49:05Z

[ Upstream commit 5aec598c456fe3c1b71a1202cbb42bdc2a643277 ] The function blk_log_remap() can be simplified by removing the call to get_pdu_remap() that copies the values into extra variable to print the data, which also fixes the endiannness warning reported by sparse. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blktrace: fix endianness in get_pdu_int()

2020-06-24T15:49:05Z

[ Upstream commit 71df3fd82e7cccec7b749a8607a4662d9f7febdd ] In function get_pdu_len() replace variable type from __u64 to __be64. This fixes sparse warning. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blktrace: use errno instead of bi_status

2020-06-24T15:49:04Z

[ Upstream commit 48bc3cd3e07a1486f45d9971c75d6090976c3b1b ] In blk_add_trace_spliti() blk_add_trace_bio_remap() use blk_status_to_errno() to pass the error instead of pasing the bi_status. This fixes the sparse warning. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blktrace: fix dereference after null check

2020-03-05T20:42:40Z

There was a recent change in blktrace.c that added a RCU protection to `q->blk_trace` in order to fix a use-after-free issue during access. However the change missed an edge case that can lead to dereferencing of `bt` pointer even when it's NULL: Coverity static analyzer marked this as a FORWARD_NULL issue with CID 1460458. ``` /kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store() 1898 ret = 0; 1899 if (bt == NULL) 1900 ret = blk_trace_setup_queue(q, bdev); 1901 1902 if (ret == 0) { 1903 if (attr == &dev_attr_act_mask) >>> CID 1460458: Null pointer dereferences (FORWARD_NULL) >>> Dereferencing null pointer "bt". 1904 bt->act_mask = value; 1905 else if (attr == &dev_attr_pid) 1906 bt->pid = value; 1907 else if (attr == &dev_attr_start_lba) 1908 bt->start_lba = value; 1909 else if (attr == &dev_attr_end_lba) ``` Added a reassignment with RCU annotation to fix the issue. Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU") Cc: stable@vger.kernel.org Reviewed-by: Ming Lei Reviewed-by: Bob Liu Reviewed-by: Steven Rostedt (VMware) Signed-off-by: Cengiz Can Signed-off-by: Jens Axboe

blktrace: Protect q->blk_trace with RCU

2020-02-25T15:40:07Z

KASAN is reporting that __blk_add_trace() has a use-after-free issue when accessing q->blk_trace. Indeed the switching of block tracing (and thus eventual freeing of q->blk_trace) is completely unsynchronized with the currently running tracing and thus it can happen that the blk_trace structure is being freed just while __blk_add_trace() works on it. Protect accesses to q->blk_trace by RCU during tracing and make sure we wait for the end of RCU grace period when shutting down tracing. Luckily that is rare enough event that we can afford that. Note that postponing the freeing of blk_trace to an RCU callback should better be avoided as it could have unexpected user visible side-effects as debugfs files would be still existing for a short while block tracing has been shut down. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711 CC: stable@vger.kernel.org Reviewed-by: Chaitanya Kulkarni Reviewed-by: Ming Lei Tested-by: Ming Lei Reviewed-by: Bart Van Assche Reported-by: Tristan Madani Signed-off-by: Jan Kara Signed-off-by: Jens Axboe

tracing: Make struct ring_buffer less ambiguous

2020-01-13T18:19:38Z

As there's two struct ring_buffers in the kernel, it causes some confusion. The other one being the perf ring buffer. It was agreed upon that as neither of the ring buffers are generic enough to be used globally, they should be renamed as: perf's ring_buffer -> perf_buffer ftrace's ring_buffer -> trace_buffer This implements the changes to the ring buffer that ftrace uses. Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home Signed-off-by: Steven Rostedt (VMware)

tracing: Rename trace_buffer to array_buffer

2020-01-13T18:19:38Z

As we are working to remove the generic "ring_buffer" name that is used by both tracing and perf, the ring_buffer name for tracing will be renamed to trace_buffer, and perf's ring buffer will be renamed to perf_buffer. As there already exists a trace_buffer that is used by the trace_arrays, it needs to be first renamed to array_buffer. Link: https://lore.kernel.org/r/20191213153553.GE20583@krava Signed-off-by: Steven Rostedt (VMware)

cgroup: use cgrp->kn->id as the cgroup ID

2019-11-12T16:18:04Z

cgroup ID is currently allocated using a dedicated per-hierarchy idr and used internally and exposed through tracepoints and bpf. This is confusing because there are tracepoints and other interfaces which use the cgroupfs ino as IDs. The preceding changes made kn->id exposed as ino as 64bit ino on supported archs or ino+gen (low 32bits as ino, high gen). There's no reason for cgroup to use different IDs. The kernfs IDs are unique and userland can easily discover them and map them back to paths using standard file operations. This patch replaces cgroup IDs with kernfs IDs. * cgroup_id() is added and all cgroup ID users are converted to use it. * kernfs_node creation is moved to earlier during cgroup init so that cgroup_id() is available during init. * While at it, s/cgroup/cgrp/ in psi helpers for consistency. * Fallback ID value is changed to 1 to be consistent with root cgroup ID. Signed-off-by: Tejun Heo Reviewed-by: Greg Kroah-Hartman Cc: Namhyung Kim