kernel.git/kernel/printk/printk.c, branch linux-rolling-stable

Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-12-06T01:29:04Z

Pull SoC driver updates from Arnd Bergmann: "This is the first half of the driver changes: - A treewide interface change to the "syscore" operations for power management, as a preparation for future Tegra specific changes - Reset controller updates with added drivers for LAN969x, eic770 and RZ/G3S SoCs - Protection of system controller registers on Renesas and Google SoCs, to prevent trivially triggering a system crash from e.g. debugfs access - soc_device identification updates on Nvidia, Exynos and Mediatek - debugfs support in the ST STM32 firewall driver - Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI - Cleanups for memory controller support on Nvidia and Renesas" * tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits) memory: tegra186-emc: Fix missing put_bpmp Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support soc: rockchip: grf: Add select correct PWM implementation on RK3368 soc/tegra: pmc: Add USB wake events for Tegra234 amba: tegra-ahb: Fix device leak on SMMU enable ...

Merge branch 'rework/threaded-printk' into for-linus

2025-12-01T13:16:45Z

Merge branch 'rework/suspend-fixes' into for-linus

2025-12-01T13:16:28Z

Merge branch 'rework/preempt-legacy-kthread' into for-linus

2025-12-01T13:16:08Z

printk: Use console_is_usable on console_unblank

2025-11-27T14:54:50Z

The macro for_each_console_srcu iterates over all registered consoles. It's implied that all registered consoles have CON_ENABLED flag set, making the check for the flag unnecessary. Call console_is_usable function to fully verify if the given console is usable before calling the ->unblank callback. Signed-off-by: Marcos Paulo de Souza Reviewed-by: Petr Mladek Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-3-57b8b78647f4@suse.com Signed-off-by: Petr Mladek

printk: Avoid irq_work for printk_deferred() on suspend

2025-11-24T14:44:48Z

With commit ("printk: Avoid scheduling irq_work on suspend") the implementation of printk_get_console_flush_type() was modified to avoid offloading when irq_work should be blocked during suspend. Since printk uses the returned flush type to determine what flushing methods are used, this was thought to be sufficient for avoiding irq_work usage during the suspend phase. However, vprintk_emit() implements a hack to support printk_deferred(). In this hack, the returned flush type is adjusted to make sure no legacy direct printing occurs when printk_deferred() was used. Because of this hack, the legacy offloading flushing method can still be used, causing irq_work to be queued when it should not be. Adjust the vprintk_emit() hack to also consider @console_irqwork_blocked so that legacy offloading will not be chosen when irq_work should be blocked. Link: https://lore.kernel.org/lkml/87fra90xv4.fsf@jogness.linutronix.de Signed-off-by: John Ogness Fixes: 26873e3e7f0c ("printk: Avoid scheduling irq_work on suspend") Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek

printk: Avoid scheduling irq_work on suspend

2025-11-19T15:01:31Z

Allowing irq_work to be scheduled while trying to suspend has shown to cause problems as some architectures interpret the pending interrupts as a reason to not suspend. This became a problem for printk() with the introduction of NBCON consoles. With every printk() call, NBCON console printing kthreads are woken by queueing irq_work. This means that irq_work continues to be queued due to printk() calls late in the suspend procedure. Avoid this problem by preventing printk() from queueing irq_work once console suspending has begun. This applies to triggering NBCON and legacy deferred printing as well as klogd waiters. Since triggering of NBCON threaded printing relies on irq_work, the pr_flush() within console_suspend_all() is used to perform the final flushing before suspending consoles and blocking irq_work queueing. NBCON consoles that are not suspended (due to the usage of the "no_console_suspend" boot argument) transition to atomic flushing. Introduce a new global variable @console_irqwork_blocked to flag when irq_work queueing is to be avoided. The flag is used by printk_get_console_flush_type() to avoid allowing deferred printing and switch NBCON consoles to atomic flushing. It is also used by vprintk_emit() to avoid klogd waking. Add WARN_ON_ONCE(console_irqwork_blocked) to the irq_work queuing functions to catch any code that attempts to queue printk irq_work during the suspending/resuming procedure. Cc: stable@vger.kernel.org # 6.13.x because no drivers in 6.12.x Fixes: 6b93bb41f6ea ("printk: Add non-BKL (nbcon) console basic infrastructure") Closes: https://lore.kernel.org/lkml/DB9PR04MB8429E7DDF2D93C2695DE401D92C4A@DB9PR04MB8429.eurprd04.prod.outlook.com Signed-off-by: John Ogness Reviewed-by: Petr Mladek Tested-by: Sherry Sun Link: https://patch.msgid.link/20251113160351.113031-3-john.ogness@linutronix.de Signed-off-by: Petr Mladek

printk: Allow printk_trigger_flush() to flush all types

2025-11-19T15:01:31Z

Currently printk_trigger_flush() only triggers legacy offloaded flushing, even if that may not be the appropriate method to flush for currently registered consoles. (The function predates the NBCON consoles.) Since commit 6690d6b52726 ("printk: Add helper for flush type logic") there is printk_get_console_flush_type(), which also considers NBCON consoles and reports all the methods of flushing appropriate based on the system state and consoles available. Update printk_trigger_flush() to use printk_get_console_flush_type() to appropriately flush registered consoles. Suggested-by: Petr Mladek Signed-off-by: John Ogness Reviewed-by: Petr Mladek Link: https://lore.kernel.org/stable/20251113160351.113031-2-john.ogness%40linutronix.de Tested-by: Sherry Sun Link: https://patch.msgid.link/20251113160351.113031-2-john.ogness@linutronix.de Signed-off-by: Petr Mladek

syscore: Pass context data to callbacks

2025-11-14T09:01:52Z

Several drivers can benefit from registering per-instance data along with the syscore operations. To achieve this, move the modifiable fields out of the syscore_ops structure and into a separate struct syscore that can be registered with the framework. Add a void * driver data field for drivers to store contextual data that will be passed to the syscore ops. Acked-by: Rafael J. Wysocki (Intel) Signed-off-by: Thierry Reding

printk_legacy_map: use LD_WAIT_CONFIG instead of LD_WAIT_SLEEP

2025-10-29T13:20:56Z

printk_legacy_map is used to hide lock nesting violations caused by legacy drivers and is using the wrong override type. LD_WAIT_SLEEP is for always sleeping lock types such as mutex_t. LD_WAIT_CONFIG is for lock type which are sleeping while spinning on PREEMPT_RT such as spinlock_t. Signed-off-by: Oleg Nesterov Reviewed-by: Petr Mladek Reviewed-by: John Ogness Reviewed-by: Sebastian Andrzej Siewior Link: https://patch.msgid.link/20251026150726.GA23223@redhat.com [pmladek@suse.com: Fixed indentation.] Signed-off-by: Petr Mladek