kernel.git/kernel/irq/manage.c, branch linux-4.20.y

genirq: Make sure the initial affinity is not empty

2019-03-05T16:59:36Z

[ Upstream commit bddda606ec76550dd63592e32a6e87e7d32583f7 ] If all CPUs in the irq_default_affinity mask are offline when an interrupt is initialized then irq_setup_affinity() can set an empty affinity mask for a newly allocated interrupt. Fix this by falling back to cpu_online_mask in case the resulting affinity mask is zero. Signed-off-by: Srinivas Ramana Signed-off-by: Thomas Gleixner Cc: linux-arm-msm@vger.kernel.org Link: https://lkml.kernel.org/r/1545312957-8504-1-git-send-email-sramana@codeaurora.org Signed-off-by: Sasha Levin

genirq: Fix race on spurious interrupt detection

2018-10-19T15:31:00Z

Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs") made detection of spurious interrupts work for threaded handlers by: a) incrementing a counter every time the thread returns IRQ_HANDLED, and b) checking whether that counter has increased every time the thread is woken. However for oneshot interrupts, the commit unmasks the interrupt before incrementing the counter. If another interrupt occurs right after unmasking but before the counter is incremented, that interrupt is incorrectly considered spurious: time | irq_thread() | irq_thread_fn() | action->thread_fn() | irq_finalize_oneshot() | unmask_threaded_irq() /* interrupt is unmasked */ | | /* interrupt fires, incorrectly deemed spurious */ | | atomic_inc(&desc->threads_handled); /* counter is incremented */ v This is observed with a hi3110 CAN controller receiving data at high volume (from a separate machine sending with "cangen -g 0 -i -x"): The controller signals a huge number of interrupts (hundreds of millions per day) and every second there are about a dozen which are deemed spurious. In theory with high CPU load and the presence of higher priority tasks, the number of incorrectly detected spurious interrupts might increase beyond the 99,900 threshold and cause disablement of the interrupt. In practice it just increments the spurious interrupt count. But that can cause people to waste time investigating it over and over. Fix it by moving the accounting before the invocation of irq_finalize_oneshot(). [ tglx: Folded change log update ] Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs") Signed-off-by: Lukas Wunner Signed-off-by: Thomas Gleixner Cc: Mathias Duckeck Cc: Akshay Bhat Cc: Casey Fitzpatrick Cc: stable@vger.kernel.org # v3.16+ Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-08-13T17:47:26Z

Pull genirq updates from Thomas Gleixner: "The irq departement provides: - A synchronization fix for free_irq() to synchronize just the removed interrupt thread on shared interrupt lines. - Consolidate the multi low level interrupt entry handling and mvoe it to the generic code instead of adding yet another copy for RISC-V - Refactoring of the ARM LPI allocator and LPI exposure to the hypervisor - Yet another interrupt chip driver for the JZ4725B SoC - Speed up for /proc/interrupts as people seem to love reading this file with high frequency - Miscellaneous fixes and updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER arm64: Use the new GENERIC_IRQ_MULTI_HANDLER ARM: Convert to GENERIC_IRQ_MULTI_HANDLER irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices dt-bindings: irqchip: renesas-irqc: Document r8a77980 support dt-bindings: irqchip: renesas-irqc: Document r8a77470 support irqchip/ingenic: Add support for the JZ4725B SoC irqchip/stm32: Add exti0 translation for stm32mp1 genirq: Remove redundant NULL pointer check in __free_irq() irqchip/gic-v3-its: Honor hypervisor enforced LPI range irqchip/gic-v3: Expose GICD_TYPER in the rdist structure irqchip/gic-v3-its: Drop chunk allocation compatibility irqchip/gic-v3-its: Move minimum LPI requirements to individual busses irqchip/gic-v3-its: Use full range of LPIs irqchip/gic-v3-its: Refactor LPI allocator genirq: Synchronize only with single thread on free_irq() genirq: Update code comments wrt recycled thread_mask ...

genirq: Make force irq threading setup more robust

2018-08-03T13:19:01Z

The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by: Kurt Kanzenbach Signed-off-by: Thomas Gleixner Tested-by: Kurt Kanzenbach Cc: stable@vger.kernel.org

genirq: Remove redundant NULL pointer check in __free_irq()

2018-07-17T11:35:44Z

The NULL pointer check in __free_irq() triggers a 'dereference before NULL pointer check' warning in static code analysis. It turns out that the check is redundant because all callers have a NULL pointer check already. Remove it. Signed-off-by: RAGHU Halharvi Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20180717102009.7708-1-raghuhack78@gmail.com

genirq: Synchronize only with single thread on free_irq()

2018-06-24T12:17:27Z

When pciehp is converted to threaded IRQ handling, removal of unplugged devices below a PCIe hotplug port happens synchronously in the IRQ thread. Removal of devices typically entails a call to free_irq() by their drivers. If those devices share their IRQ with the hotplug port, __free_irq() deadlocks because it calls synchronize_irq() to wait for all hard IRQ handlers as well as all threads sharing the IRQ to finish. Actually it's sufficient to wait only for the IRQ thread of the removed device, so call synchronize_hardirq() to wait for all hard IRQ handlers to finish, but no longer for any threads. Compensate by rearranging the control flow in irq_wait_for_interrupt() such that the device's thread is allowed to run one last time after kthread_stop() has been called. kthread_stop() blocks until the IRQ thread has completed. On completion the IRQ thread clears its oneshot thread_mask bit. This is safe because __free_irq() holds the request_mutex, thereby preventing __setup_irq() from handing out the same oneshot thread_mask bit to a newly requested action. Stack trace for posterity: INFO: task irq/17-pciehp:94 blocked for more than 120 seconds. schedule+0x28/0x80 synchronize_irq+0x6e/0xa0 __free_irq+0x15a/0x2b0 free_irq+0x33/0x70 pciehp_release_ctrl+0x98/0xb0 pcie_port_remove_service+0x2f/0x40 device_release_driver_internal+0x157/0x220 bus_remove_device+0xe2/0x150 device_del+0x124/0x340 device_unregister+0x16/0x60 remove_iter+0x1a/0x20 device_for_each_child+0x4b/0x90 pcie_port_device_remove+0x1e/0x30 pci_device_remove+0x36/0xb0 device_release_driver_internal+0x157/0x220 pci_stop_bus_device+0x7d/0xa0 pci_stop_bus_device+0x3d/0xa0 pci_stop_and_remove_bus_device+0xe/0x20 pciehp_unconfigure_device+0xb8/0x160 pciehp_disable_slot+0x84/0x130 pciehp_ist+0x158/0x190 irq_thread_fn+0x1b/0x50 irq_thread+0x143/0x1a0 kthread+0x111/0x130 Signed-off-by: Lukas Wunner Signed-off-by: Thomas Gleixner Cc: Bjorn Helgaas Cc: Mika Westerberg Cc: linux-pci@vger.kernel.org Link: https://lkml.kernel.org/r/d72b41309f077c8d3bee6cc08ad3662d50b5d22a.1529828292.git.lukas@wunner.de

genirq: Update code comments wrt recycled thread_mask

2018-06-24T12:17:26Z

Previously a race existed between __free_irq() and __setup_irq() wherein the thread_mask of a just removed action could be handed out to a newly added action and the freed irq thread would then tread on the oneshot mask bit of the newly added irq thread in irq_finalize_oneshot(): time | __free_irq() | raw_spin_lock_irqsave(&desc->lock, flags); | | raw_spin_unlock_irqrestore(&desc->lock, flags); | | __setup_irq() | raw_spin_lock_irqsave(&desc->lock, flags); | | raw_spin_unlock_irqrestore(&desc->lock, flags); | | irq_thread() of freed irq (__free_irq() waits in synchronize_irq()) | irq_thread_fn() | irq_finalize_oneshot() | raw_spin_lock_irq(&desc->lock); | desc->threads_oneshot &= ~action->thread_mask; | raw_spin_unlock_irq(&desc->lock); v The race was known at least since 2012 when it was documented in a code comment by commit e04268b0effc ("genirq: Remove paranoid warnons and bogus fixups"). The race itself is harmless as nothing touches any of the potentially freed data after synchronize_irq(). In 2017 the race was close by commit 9114014cf4e6 ("genirq: Add mutex to irq desc to serialize request/free_irq()"), apparently inadvertantly so because the race is neither mentioned in the commit message nor was the code comment updated. Make up for that. Signed-off-by: Lukas Wunner Signed-off-by: Thomas Gleixner Cc: Bjorn Helgaas Cc: Mika Westerberg Cc: linux-pci@vger.kernel.org Link: https://lkml.kernel.org/r/32fc25aa35ecef4b2692f57687bb7fc2a57230e2.1529828292.git.lukas@wunner.de

genirq: Fix editing error in a comment

2018-06-19T07:19:41Z

When the comment was reflowed to a wider format, the "*" snuck in. Fixes: ae88a23b32fa ("irq: refactor and clean up the free_irq() code flow") Signed-off-by: Jonathan Neuschäfer Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20180617124018.25539-1-j.neuschaefer@gmx.net

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-10T16:44:53Z

Pull x86 updates and fixes from Thomas Gleixner: - Fix the (late) fallout from the vector management rework causing hlist corruption and irq descriptor reference leaks caused by a missing sanity check. The straight forward fix triggered another long standing issue to surface. The pre rework code hid the issue due to being way slower, but now the chance that user space sees an EBUSY error return when updating irq affinities is way higher, though quite a bunch of userspace tools do not handle it properly despite the fact that EBUSY could be returned for at least 10 years. It turned out that the EBUSY return can be avoided completely by utilizing the existing delayed affinity update mechanism for irq remapped scenarios as well. That's a bit more error handling in the kernel, but avoids fruitless fingerpointing discussions with tool developers. - Decouple PHYSICAL_MASK from AMD SME as its going to be required for the upcoming Intel memory encryption support as well. - Handle legacy device ACPI detection properly for newer platforms - Fix the wrong argument ordering in the vector allocation tracepoint - Simplify the IDT setup code for the APIC=n case - Use the proper string helpers in the MTRR code - Remove a stale unused VDSO source file - Convert the microcode update lock to a raw spinlock as its used in atomic context. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Enable CMT and MBM on new Skylake stepping x86/apic/vector: Print APIC control bits in debugfs genirq/affinity: Defer affinity setting if irq chip is busy x86/platform/uv: Use apic_ack_irq() x86/ioapic: Use apic_ack_irq() irq_remapping: Use apic_ack_irq() x86/apic: Provide apic_ack_irq() genirq/migration: Avoid out of line call if pending is not set genirq/generic_pending: Do not lose pending affinity update x86/apic/vector: Prevent hlist corruption and leaks x86/vector: Fix the args of vector_alloc tracepoint x86/idt: Simplify the idt_setup_apic_and_irq_gates() x86/platform/uv: Remove extra parentheses x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME x86: Mark native_set_p4d() as __always_inline x86/microcode: Make the late update update_lock a raw lock for RT x86/mtrr: Convert to use strncpy_from_user() helper x86/mtrr: Convert to use match_string() helper x86/vdso: Remove unused file x86/i8237: Register device based on FADT legacy boot flag

genirq/affinity: Defer affinity setting if irq chip is busy

2018-06-06T13:18:22Z

The case that interrupt affinity setting fails with -EBUSY can be handled in the kernel completely by using the already available generic pending infrastructure. If a irq_chip::set_affinity() fails with -EBUSY, handle it like the interrupts for which irq_chip::set_affinity() can only be invoked from interrupt context. Copy the new affinity mask to irq_desc::pending_mask and set the affinity pending bit. The next raised interrupt for the affected irq will check the pending bit and try to set the new affinity from the handler. This avoids that -EBUSY is returned when an affinity change is requested from user space and the previous change has not been cleaned up. The new affinity will take effect when the next interrupt is raised from the device. Fixes: dccfe3147b42 ("x86/vector: Simplify vector move cleanup") Signed-off-by: Thomas Gleixner Tested-by: Song Liu Cc: Joerg Roedel Cc: Peter Zijlstra Cc: Song Liu Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis Cc: Borislav Petkov Cc: Tariq Toukan Link: https://lkml.kernel.org/r/20180604162224.819273597@linutronix.de