kernel.git/kernel/irq/manage.c, branch linux-4.12.y

genirq: Release resources in __setup_irq() error path

2017-06-12T22:40:39Z

In case __irq_set_trigger() fails the resources requested via irq_request_resources() are not released. Add the missing release call into the error handling path. Fixes: c1bacbae8192 ("genirq: Provide irq_request/release_resources chip callbacks") Signed-off-by: Heiner Kallweit Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/655538f5-cb20-a892-ff15-fbd2dd1fa4ec@gmail.com

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-05-09T02:03:25Z

Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...

genirq: Return the IRQ name from free_irq()

2017-04-18T18:40:00Z

This allows callers to get back at them instead of having to store it in another variable. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner

genirq: Fix indentation in remove_irq()

2017-04-18T18:39:20Z

Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner

genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs

2017-04-15T13:42:43Z

When requesting a shared irq with IRQF_TRIGGER_NONE then the irqaction flags get filled with the trigger type from the irq_data: if (!(new->flags & IRQF_TRIGGER_MASK)) new->flags |= irqd_get_trigger_type(&desc->irq_data); On the first setup_irq() the trigger type in irq_data is NONE when the above code executes, then the irq is started up for the first time and then the actual trigger type gets established, but that's too late to fix up new->flags. When then a second user of the irq requests the irq with IRQF_TRIGGER_NONE its irqaction's triggertype gets set to the actual trigger type and the following check fails: if (!((old->flags ^ new->flags) & IRQF_TRIGGER_MASK)) Resulting in the request_irq failing with -EBUSY even though both users requested the irq with IRQF_SHARED | IRQF_TRIGGER_NONE Fix this by comparing the new irqaction's trigger type to the trigger type stored in the irq_data which correctly reflects the actual trigger type being used for the irq. Suggested-by: Thomas Gleixner Signed-off-by: Hans de Goede Acked-by: Marc Zyngier Link: http://lkml.kernel.org/r/20170415100831.17073-1-hdegoede@redhat.com Signed-off-by: Thomas Gleixner

genirq: Use cpumask_available() for check of cpumask variable

2017-04-14T18:49:27Z

This fixes the following clang warning when CONFIG_CPUMASK_OFFSTACK=n: kernel/irq/manage.c:839:28: error: address of array 'desc->irq_common_data.affinity' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] Signed-off-by: Matthias Kaehlcke Cc: Grant Grundler Cc: Rusty Russell Cc: Greg Hackmann Cc: Michael Davidson Cc: Andrew Morton Link: http://lkml.kernel.org/r/20170412182030.83657-2-mka@chromium.org Signed-off-by: Thomas Gleixner

sched/headers: Prepare to move the get_task_struct()/put_task_struct() and related APIs from to

2017-03-02T07:42:40Z

But first update usage sites with the new header dependency. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:27Z

We are going to move scheduler ABI details to , which will be used from a number of .c files. Create empty placeholder header that maps to . Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

scripts/spelling.txt: add "an user" pattern and fix typo instances

2017-02-28T02:43:46Z

Fix typos and add the following to the scripts/spelling.txt: an user||a user an userspace||a userspace I also added "userspace" to the list since it is a common word in Linux. I found some instances for "an userfaultfd", but I did not add it to the list. I felt it is endless to find words that start with "user" such as "userland" etc., so must draw a line somewhere. Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

genirq: Use irq type from irqdata instead of irqdesc

2016-11-08T14:15:19Z

The type flags in the irq descriptor are there for historical reasons and only updated via irq_modify_status() or irq_set_type(). Both functions also update the type flags in irqdata. __setup_irq() is the only left over user of the type flags in the irq descriptor. If __setup_irq() is called with empty irq type flags, then the type flags are retrieved from irqdata. If an interrupt is shared, then the type flags are compared with the type flags stored in the irq descriptor. On x86 the ioapic does not have a irq_set_type() callback because the type is defined in the BIOS tables and cannot be changed. The type is stored in irqdata at setup time without updating the type data in the irq descriptor. As a result the comparison described above fails. There is no point in updating the irq descriptor flags because the only relevant storage is irqdata. Use the type flags from irqdata for both retrieval and comparison in __setup_irq() instead. Aside of that the print out in case of non matching type flags has the old and new type flags arguments flipped. Fix that as well. For correctness sake the flags stored in the irq descriptor should be removed, but this is beyond the scope of this bugfix and will be done in a later patch. Fixes: 4b357daed698 ("genirq: Look-up trigger type if not specified by caller") Reported-and-tested-by: Mika Westerberg Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: Jon Hunter Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanos Signed-off-by: Thomas Gleixner