kernel.git/kernel/bpf/bpf_inode_storage.c, branch linux-6.19.y

bpf: use rcu_read_lock_dont_migrate() for bpf_inode_storage_free()

2025-08-26T01:52:16Z

Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in bpf_inode_storage_free to obtain better performance when PREEMPT_RCU is not enabled. Signed-off-by: Menglong Dong Link: https://lore.kernel.org/r/20250821090609.42508-4-dongml2@chinatelecom.cn Signed-off-by: Alexei Starovoitov

bpf: Disable migration when destroying inode storage

2025-01-09T02:06:36Z

When destroying inode storage, it invokes bpf_local_storage_destroy() to remove all storage elements saved in the inode storage. The destroy procedure will call bpf_selem_free() to free the element, and bpf_selem_free() calls bpf_obj_free_fields() to free the special fields in map value (e.g., kptr). Since kptrs may be allocated from bpf memory allocator, migrate_{disable|enable} pairs are necessary for the freeing of these kptrs. To simplify reasoning about when migrate_disable() is needed for the freeing of these dynamically-allocated kptrs, let the caller to guarantee migration is disabled before invoking bpf_obj_free_fields(). Therefore, the patch adds migrate_{disable|enable} pair in bpf_inode_storage_free(). The migrate_{disable|enable} pairs in the underlying implementation of bpf_obj_free_fields() will be removed by the following patch. Signed-off-by: Hou Tao Link: https://lore.kernel.org/r/20250108010728.207536-7-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov

Merge tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2024-11-21T16:11:04Z

Pull bpf updates from Alexei Starovoitov: - Add BPF uprobe session support (Jiri Olsa) - Optimize uprobe performance (Andrii Nakryiko) - Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman) - Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao) - Prevent tailcall infinite loop caused by freplace (Leon Hwang) - Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi) - Introduce uptr support in the task local storage map (Martin KaFai Lau) - Stringify errno log messages in libbpf (Mykyta Yatsenko) - Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim) - Support BPF objects of either endianness in libbpf (Tony Ambardar) - Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai) - Introduce private stack for eligible BPF programs (Yonghong Song) - Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee) - Migrate test_sock to selftests/bpf test_progs (Jordan Rife) * tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits) libbpf: Change hash_combine parameters from long to unsigned long selftests/bpf: Fix build error with llvm 19 libbpf: Fix memory leak in bpf_program__attach_uprobe_multi bpf: use common instruction history across all states bpf: Add necessary migrate_disable to range_tree. bpf: Do not alloc arena on unsupported arches selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar selftests/bpf: Add a test for arena range tree algorithm bpf: Introduce range_tree data structure and use it in bpf arena samples/bpf: Remove unused variable in xdp2skb_meta_kern.c samples/bpf: Remove unused variables in tc_l2_redirect_kern.c bpftool: Cast variable `var` to long long bpf, x86: Propagate tailcall info only for subprogs bpf: Add kernel symbol for struct_ops trampoline bpf: Use function pointers count as struct_ops links count bpf: Remove unused member rcu from bpf_struct_ops_map selftests/bpf: Add struct_ops prog private stack tests bpf: Support private stack for struct_ops progs selftests/bpf: Add tracing prog private stack tests bpf, x86: Support private stack in jit ...

bpf: Add "bool swap_uptrs" arg to bpf_local_storage_update() and bpf_selem_alloc()

2024-10-24T17:25:59Z

In a later patch, the task local storage will only accept uptr from the syscall update_elem and will not accept uptr from the bpf prog. The reason is the bpf prog does not have a way to provide a valid user space address. bpf_local_storage_update() and bpf_selem_alloc() are used by both bpf prog bpf_task_storage_get(BPF_LOCAL_STORAGE_GET_F_CREATE) and bpf syscall update_elem. "bool swap_uptrs" arg is added to bpf_local_storage_update() and bpf_selem_alloc() to tell if it is called by the bpf prog or by the bpf syscall. When swap_uptrs==true, it is called by the syscall. The arg is named (swap_)uptrs because the later patch will swap the uptrs between the newly allocated selem and the user space provided map_value. It will make error handling easier in case map->ops->map_update_elem() fails and the caller can decide if it needs to unpin the uptr in the user space provided map_value or the bpf_local_storage_update() has already taken the uptr ownership and will take care of unpinning it also. Only swap_uptrs==false is passed now. The logic to handle the true case will be added in a later patch. Signed-off-by: Martin KaFai Lau Link: https://lore.kernel.org/r/20241023234759.860539-4-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov

remove pointless includes of

2024-10-07T17:34:41Z

some of those used to be needed, some had been cargo-culted for no reason... Reviewed-by: Christian Brauner Signed-off-by: Al Viro

bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)

2024-08-13T22:58:10Z

Swith fdget_raw() use cases in bpf_inode_storage.c to CLASS(fd_raw). Reviewed-by: Christian Brauner Signed-off-by: Al Viro Signed-off-by: Andrii Nakryiko

introduce fd_file(), convert all accessors to it.

2024-08-13T02:00:43Z

For any changes of struct fd representation we need to turn existing accesses to fields into calls of wrappers. Accesses to struct fd::flags are very few (3 in linux/file.h, 1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in explicit initializers). Those can be dealt with in the commit converting to new layout; accesses to struct fd::file are too many for that. This commit converts (almost) all of f.file to fd_file(f). It's not entirely mechanical ('file' is used as a member name more than just in struct fd) and it does not even attempt to distinguish the uses in pointer context from those in boolean context; the latter will be eventually turned into a separate helper (fd_empty()). NOTE: mass conversion to fd_empty(), tempting as it might be, is a bad idea; better do that piecewise in commit that convert from fdget...() to CLASS(...). [conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c caught by git; fs/stat.c one got caught by git grep] [fs/xattr.c conflict] Reviewed-by: Christian Brauner Signed-off-by: Al Viro

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2023-04-26T23:07:23Z

Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...

bpf: switch to fdget_raw()

2023-04-21T02:55:35Z

Reviewed-by: Christian Brauner Signed-off-by: Al Viro

bpf: Teach verifier that certain helpers accept NULL pointer.

2023-04-04T23:57:16Z

bpf_[sk|inode|task|cgrp]_storage_[get|delete]() and bpf_get_socket_cookie() helpers perform run-time check that sk|inode|task|cgrp pointer != NULL. Teach verifier about this fact and allow bpf programs to pass PTR_TO_BTF_ID | PTR_MAYBE_NULL into such helpers. It will be used in the subsequent patch that will do bpf_sk_storage_get(.., skb->sk, ...); Even when 'skb' pointer is trusted the 'sk' pointer may be NULL. Signed-off-by: Alexei Starovoitov Signed-off-by: Andrii Nakryiko Acked-by: David Vernet Link: https://lore.kernel.org/bpf/20230404045029.82870-5-alexei.starovoitov@gmail.com