kernel.git/include/net/bluetooth/hci.h, branch linux-6.16.y

Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections

2025-08-28T14:34:45Z

[ Upstream commit a7bcffc673de219af2698fbb90627016233de67b ] Currently, BIS_LINK is used for both BIG sync and PA sync connections, which makes it impossible to distinguish them when searching for a PA sync connection. Adding PA_LINK will make the distinction clearer and simplify future extensions for PA-related features. Signed-off-by: Yang Li Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 9d4b01a0bf8d ("Bluetooth: hci_core: Fix not accounting for BIS/CIS/PA links separately") Signed-off-by: Sasha Levin

Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event

2025-08-20T16:41:05Z

[ Upstream commit b2a5f2e1c127cb431df22e114998ff72eb4578c8 ] When the BIS source stops, the controller sends an LE BIG Sync Lost event (subevent 0x1E). Currently, this event is not handled, causing the BIS stream to remain active in BlueZ and preventing recovery. Signed-off-by: Yang Li Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_event: Mask data status from LE ext adv reports

2025-08-15T14:38:52Z

[ Upstream commit 0cadf8534f2a727bc3a01e8c583b085d25963ee0 ] The Event_Type field in an LE Extended Advertising Report uses bits 5 and 6 for data status (e.g. truncation or fragmentation), not the PDU type itself. The ext_evt_type_to_legacy() function fails to mask these status bits before evaluation. This causes valid advertisements with status bits set (e.g. a truncated non-connectable advertisement, which ends up showing as PDU type 0x40) to be misclassified as unknown and subsequently dropped. This is okay for most checks which use bitwise AND on the relevant event type bits, but it doesn't work for non-connectable types, which are checked with '== LE_EXT_ADV_NON_CONN_IND' (that is, zero). In terms of behaviour, first the device sends a truncated report: > HCI Event: LE Meta Event (0x3e) plen 26 LE Extended Advertising Report (0x0d) Entry 0 Event type: 0x0040 Data status: Incomplete, data truncated, no more to come Address type: Random (0x01) Address: 1D:12:46:FA:F8:6E (Non-Resolvable) SID: 0x03 RSSI: -98 dBm (0x9e) Data length: 0x00 Then, a few seconds later, it sends the subsequent complete report: > HCI Event: LE Meta Event (0x3e) plen 122 LE Extended Advertising Report (0x0d) Entry 0 Event type: 0x0000 Data status: Complete Address type: Random (0x01) Address: 1D:12:46:FA:F8:6E (Non-Resolvable) SID: 0x03 RSSI: -97 dBm (0x9f) Data length: 0x60 Service Data: Google (0xfef3) Data[92]: ... These devices often send multiple truncated reports per second. This patch introduces a PDU type mask to ensure only the relevant bits are evaluated, allowing for the correct translation of all valid extended advertising packets. Fixes: b2cc9761f144 ("Bluetooth: Handle extended ADV PDU types") Signed-off-by: Chris Down Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap

2025-07-16T19:37:53Z

The 'quirks' member already ran out of bits on some platforms some time ago. Replace the integer member by a bitmap in order to have enough bits in future. Replace raw bit operations by accessor macros. Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING") Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE") Suggested-by: Pauli Virtanen Tested-by: Ivan Pravdin Signed-off-by: Kiran K Signed-off-by: Christian Eggers Signed-off-by: Luiz Augusto von Dentz

Bluetooth: separate CIS_LINK and BIS_LINK link types

2025-05-21T14:29:28Z

Use separate link type id for unicast and broadcast ISO connections. These connection types are handled with separate HCI commands, socket API is different, and hci_conn has union fields that are different in the two cases, so they shall not be mixed up. Currently in most places it is attempted to distinguish ucast by bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink hci_conn in iso_conn_ready(). Additionally checking sync_handle might be OK, but depends on details of bcast conn configuration flow. To avoid complicating it, use separate link types. Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Introduce HCI Driver protocol

2025-05-21T14:28:07Z

Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out SCO data through USB Bluetooth chips, it's observed that with the patch HFP is flaky on most of the existing USB Bluetooth controllers: Intel chips sometimes send out no packet for Transparent codec; MTK chips may generate SCO data with a wrong handle for CVSD codec; RTK could split the data with a wrong packet size for Transparent codec; ... etc. To address the issue above one needs to reset the altsetting back to zero when there is no active SCO connection, which is the same as the BlueZ behavior, and another benefit is the bus doesn't need to reserve bandwidth when no SCO connection. This patch adds the infrastructure that allow the user space program to talk to Bluetooth drivers directly: - Define the new packet type HCI_DRV_PKT which is specifically used for communication between the user space program and the Bluetooth drviers - hci_send_frame intercepts the packets and invokes drivers' HCI Drv callbacks (so far only defined for btusb) - 2 kinds of events to user space: Command Status and Command Complete, the former simply returns the status while the later may contain additional response data. Cc: chromeos-bluetooth-upstreaming@chromium.org Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting") Signed-off-by: Hsin-chen Chuang Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync

2025-04-25T19:03:19Z

BIG Create Sync requires the command to just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the BIG sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection. Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver

2025-04-25T19:03:19Z

Broadcast Receiver requires creating PA sync but the command just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the PA sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection. Fixes: 4a5e0ba68676 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel

2025-03-25T16:47:23Z

Return Parameters is not only status, also bdaddr: BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E page 1870: BLUETOOTH CORE SPECIFICATION Version 5.0 | Vol 2, Part E page 802: Return parameters: Status: Size: 1 octet BD_ADDR: Size: 6 octets Note that it also fixes the warning: "Bluetooth: hci0: unexpected cc 0x041a length: 7 > 1" Fixes: c8992cffbe741 ("Bluetooth: hci_event: Use of a function table to handle Command Complete") Signed-off-by: Wentao Guan Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO

2025-03-25T16:46:40Z

This enables buffer flow control for SCO/eSCO (see: Bluetooth Core 6.0 spec: 6.22. Synchronous Flow Control Enable), recently this has caused the following problem and is actually a nice addition for the likes of Socket TX complete: < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 > HCI Event: Command Complete (0x0e) plen 11 Read Buffer Size (0x04|0x0005) ncmd 1 Status: Success (0x00) ACL MTU: 1021 ACL max packet: 5 SCO MTU: 240 SCO max packet: 8 ... < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 < SCO Data TX: Handle 257 flags 0x00 dlen 120 > HCI Event: Hardware Error (0x10) plen 1 Code: 0x0a To fix the code will now attempt to enable buffer flow control when HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED is set by the driver: < HCI Command: Write Sync Fl.. (0x03|0x002f) plen 1 Flow control: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 Write Sync Flow Control Enable (0x03|0x002f) ncmd 1 Status: Success (0x00) On success then HCI_SCO_FLOWCTL would be set which indicates sco_cnt shall be used for flow contro. Fixes: 7fedd3bb6b77 ("Bluetooth: Prioritize SCO traffic") Signed-off-by: Luiz Augusto von Dentz Tested-by: Pauli Virtanen