kernel.git/include/media/hevc-ctrls.h, branch linux-5.19.y

media: uapi: HEVC: Change pic_order_cnt definition in v4l2_hevc_dpb_entry

2022-08-17T13:14:50Z

[ Upstream commit c4a179c7167ee16aad1267f9c99bc1ecff475585 ] The HEVC specification describes the following: "PicOrderCntVal is derived as follows: PicOrderCntVal = PicOrderCntMsb + slice_pic_order_cnt_lsb The value of PicOrderCntVal shall be in the range of −2^31 to 2^31 − 1, inclusive." To match with these definitions change __u16 pic_order_cnt[2] into __s32 pic_order_cnt_val. Change v4l2_ctrl_hevc_slice_params->slice_pic_order_cnt to __s32 too. Signed-off-by: Benjamin Gaignard Reviewed-by: Ezequiel Garcia Acked-by: Nicolas Dufresne Tested-by: Jernej Skrabec Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: hevc: Remove RPS named flags

2022-01-23T20:18:44Z

Marking a picture as long-term reference is valid for DPB but not for RPS. Change flag name to match with the description in HEVC spec chapter "8.3.2 Decoding process for reference picture set". PocStCurrBefore, PocStCurrAfter, PocLtCurr lists could be built by the kernel from the DPB entries struct v4l2_hevc_dpb_entry, using the information in the rps field. This way RPS flags becomes useless and are removed. This patch breaks the staging HEVC API because it introduces a new flag, changes a field name in v4l2_hevc_dpb_entry structure and removes V4L2_HEVC_DPB_ENTRY_RPS_* flags. [hverkuil: fixed some typos] Signed-off-by: Benjamin Gaignard Reviewed-by: Jernej Skrabec Reviewed-by: Ezequiel Garcia Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: hevc: Add scaling matrix control

2021-09-30T08:07:38Z

HEVC scaling lists are used for the scaling process for transform coefficients. V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED has to set when they are encoded in the bitstream. Signed-off-by: Benjamin Gaignard Reviewed-by: Jernej Skrabec Reviewed-by: Ezequiel Garcia Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: hevc: Add segment address field

2021-07-12T07:16:32Z

If HEVC frame consists of multiple slices, segment address has to be known in order to properly decode it. Add segment address field to slice parameters. Signed-off-by: Jernej Skrabec Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: uapi: Add a control for HANTRO driver

2021-06-08T14:08:59Z

The HEVC HANTRO driver needs to know the number of bits to skip at the beginning of the slice header. That is a hardware specific requirement so create a dedicated control for this purpose. Signed-off-by: Benjamin Gaignard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: hevc: Add decode params control

2021-06-08T14:04:27Z

Add decode params control and the associated structure to group all the information that are needed to decode a reference frame as is described in ITU-T Rec. H.265 section "8.3.2 Decoding process for reference picture set". Adapt Cedrus driver to these changes. Signed-off-by: Benjamin Gaignard Reviewed-by: Ezequiel Garcia Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: hevc: Add fields and flags for hevc PPS

2021-06-08T14:01:15Z

Add fields and flags as they are defined in 7.4.3.3.1 "General picture parameter set RBSP semantics of the H.265 ITU specification. Signed-off-by: Benjamin Gaignard Reviewed-by: Ezequiel Garcia Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: hevc: Add sps_max_sub_layers_minus1 to v4l2_ctrl_hevc_sps

2021-06-08T10:14:57Z

sps_max_sub_layers_minus1 is needed if the driver wishes to determine whether or not a frame might be used for reference. Signed-off-by: John Cox Reviewed-by: Benjamin Gaignard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: hevc: Fix dependent slice segment flags

2021-05-19T07:51:39Z

Dependent slice segment flag for PPS control is misnamed. It should have "enabled" at the end. It only tells if this flag is present in slice header or not and not the actual value. Fix this by renaming the PPS flag and introduce another flag for slice control which tells actual value. Signed-off-by: Jernej Skrabec Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: Rename stateful codec control macros

2020-12-03T11:27:32Z

For historical reasons, stateful codec controls are named as {}_MPEG_{}. While we can't at this point sanely change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER), we can least change the more meaningful macros such as classes macros. Signed-off-by: Ezequiel Garcia Tested-by: Jernej Skrabec Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab