kernel.git/include/linux/usb/serial.h, branch linux-2.6.32.y

tty: Make tiocgicount a handler

2011-11-26T17:10:38Z

commit d281da7ff6f70efca0553c288bb883e8605b3862 upstream Dan Rosenberg noted that various drivers return the struct with uncleared fields. Instead of spending forever trying to stomp all the drivers that get it wrong (and every new driver) do the job in one place. This first patch adds the needed operations and hooks them up, including the needed USB midlayer and serial core plumbing. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman Signed-off-by: Dan Carpenter

USB: serial: handle Data Carrier Detect changes

2011-02-17T23:36:44Z

commit d14fc1a74e846d7851f24fc9519fe87dc12a1231 upstream. Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced .carrier_raised function in several drivers. That also means tty_port_block_til_ready can now suspend the process trying to open the serial port when Carrier Detect is low and put it into tty_port.open_wait queue. We need to wake up the process when Carrier Detect goes high and trigger TTY hangup when CD goes low. Some of the devices do not report modem status line changes, or at least we don't understand the status message, so for those we remove .carrier_raised again. Signed-off-by: Libor Pechacek Signed-off-by: Greg Kroah-Hartman

USB: serial: don't call release without attach

2009-10-09T20:52:05Z

This patch (as1295) fixes a recently-added bug in the USB serial core. If certain kinds of errors occur during probing, the core may call a serial driver's release method without previously calling the attach method. This causes some drivers (io_ti in particular) to perform an invalid memory access. The patch adds a new flag to keep track of whether or not attach has been called. Signed-off-by: Alan Stern Tested-by: Jean-Denis Girard CC: stable Signed-off-by: Greg Kroah-Hartman

USB: use kfifo to buffer usb-generic serial writes

2009-09-23T13:46:34Z

When do_output_char() attempts to write a carriage return/line feed sequence, it first checks to see how much buffer room is available. If there are at least two characters free, it will write the carriage return/line feed with two calls to tty_put_char(). It calls the tty_operation functions write() for devices that don't support the tty_operations function put_char(). If the USB generic serial device's write URB is not in use, it will return the buffer size when asked how much room is available. The write() of the carriage return will cause it to mark the write URB busy, so the subsequent write() of the line feed will be ignored. This patch uses the kfifo infrastructure to implement a write FIFO that accurately returns the amount of space available in the buffer. Signed-off-by: David VomLehn Signed-off-by: Greg Kroah-Hartman

tty: USB serial termios bits

2009-09-19T20:13:33Z

Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman

tty: USB does not need the filp argument in the drivers

2009-09-19T20:13:26Z

And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman

tty: Fix USB kref leak

2009-07-11T02:17:22Z

The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds

USB: usb-serial: replace shutdown with disconnect, release

2009-06-16T04:44:47Z

This patch (as1254) splits up the shutdown method of usb_serial_driver into a disconnect and a release method. The problem is that the usb-serial core was calling shutdown during disconnect handling, but drivers didn't expect it to be called until after all the open file references had been closed. The result was an oops when the close method tried to use memory that had been deallocated by shutdown. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: usb-serial: call port_probe and port_remove at the right times

2009-06-16T04:44:47Z

This patch (as1253) prevents the usb-serial core from calling a driver's port_probe and port_remove methods more than once per port. It also removes some unnecessary try_module_get() calls and adds a missing port_remove method call in a failure path. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: serial: usb_debug,usb_generic_serial: implement sysrq and serial break

2009-06-16T04:44:45Z

The usb_debug driver was modified to implement serial break handling by using a "magic" data packet comprised of the sequence: 0x00 0xff 0x01 0xfe 0x00 0xfe 0x01 0xff When the tty layer requests a serial break the usb_debug driver sends the magic packet. On the receiving side the magic packet is thrown away or a sysrq is activated depending on what kernel .config options have been set. The generic serial driver was modified as well as the usb serial headers to generically implement sysrq processing in the same way the non usb uart based drivers implement the sysrq handling. This will allow other usb serial devices to implement sysrq handling as desired. The new usb serial functions are named similarly and implemented similarly to the uart functions as follows: usb_serial_handle_break <-> uart_handle_break usb_serial_handle_sysrq_char <-> uart_handle_sysrq_char Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman