kernel.git/include/linux/mfd/samsung/irq.h, branch master

mfd: sec: Add support for S2MPG11 PMIC via ACPM

2026-02-04T10:37:29Z

Add support for Samsung's S2MPG11 PMIC, which is a Power Management IC for mobile applications with buck converters, various LDOs, power meters, NTC thermistor inputs, and additional GPIO interfaces. It typically complements an S2MPG10 PMIC in a main/sub configuration as the sub-PMIC. Like S2MPG10, communication is not via I2C, but via the Samsung ACPM firmware. While at it, we can also switch to asynchronous probe, which helps with probe performance, as the drivers for s2mpg10 and s2mpg11 can probe in parallel. Note: The firmware uses the ACPM channel ID and the Speedy channel ID to select the PMIC address. Since these are firmware properties, they can not be retrieved from DT, but instead are deducted from the compatible for now. Signed-off-by: André Draszik Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-9-3b1f9831fffd@linaro.org Signed-off-by: Lee Jones

mfd: sec: Use chained IRQs for s2mpg10

2025-11-20T10:29:20Z

On S2MPG10 (and similar like S2MPG11), top-level interrupt status and mask registers exist which need to be unmasked to get the PMIC interrupts. This additional status doesn't seem to exist on other PMICs in the S2MP* family, and the S2MPG10 driver is manually dealing with masking and unmasking currently. The correct approach here is to register this hierarchy as chained interrupts, though, without any additional manual steps. Doing so will also simplify addition of other, similar, PMICs (like S2MPG11) in the future. Update the driver to do just that. Signed-off-by: André Draszik Link: https://patch.msgid.link/20251114-s2mpg10-chained-irq-v1-1-34ddfa49c4cd@linaro.org Signed-off-by: Lee Jones

mfd: sec: Add support for S2MPG10 PMIC

2025-05-23T07:48:27Z

Add support for Samsung's S2MPG10 PMIC, which is a Power Management IC for mobile applications with buck converters, various LDOs, power meters, RTC, clock outputs, and additional GPIOs interfaces. Contrary to existing Samsung S2M series PMICs supported, communication is not via I2C, but via the Samsung ACPM firmware. This commit adds the core driver. Signed-off-by: André Draszik Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-9-d66d5f39b6bf@linaro.org Signed-off-by: Lee Jones

mfd: sec: Add support for S2MPU05 PMIC

2025-03-13T12:38:45Z

Add support for Samsung's S2MPU05 PMIC. It's the primary PMIC used by Exynos7870 devices. It houses regulators (21 LDOs and 5 BUCKs) and a RTC clock device. Signed-off-by: Kaustabh Chakraborty Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-2-808d0b47a564@disroot.org Signed-off-by: Lee Jones

rtc: s5m: Drop S5M8763 support

2023-04-26T10:40:26Z

The S5M8763 MFD has no device tree compatible, and since board file support for it was removed, there's no way to use this MFD. After removing the remaining code for it from the MFD driver, also remove support for it in the s5m RTC driver, and all remaining references to it. Signed-off-by: David Virag Acked-by: Alexandre Belloni Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20230131183008.4451-3-virag.david003@gmail.com

mfd: sec-core: Add SPDX license identifiers

2018-10-23T07:58:34Z

Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec: Fix RTC alarm interrupt number on S2MPS11

2015-04-09T09:26:54Z

The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of RTC alarms 0 and 1 were inversed between these two devices. So when rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to S2MPS11_IRQ_RTCA1, not RTCA0. Fix this by using consistent RTC alarm interrupt numbers and adding a BUILD_BUG_ON for future generations. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec-core: Add support for S2MPU02 device

2014-07-09T13:58:11Z

Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver. The S2MPU02 device includes PMIC/RTC/Clock devices. Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: Add support for S2MPA01 device

2014-03-18T10:56:17Z

Add the necessary entries required for S2MPA01 multi-function device. While at it also convert whitespaces to tabs in core.h. Signed-off-by: Sachin Kamat Signed-off-by: Lee Jones

mfd: sec: Add support for S2MPS14

2014-03-18T10:50:09Z

Add support for S2MPS14 PMIC device to the MFD sec-core driver. The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones