kernel.git/include/asm-powerpc/reg.h, branch linux-2.6.15.y

[PATCH] powerpc: merge code values for identifying platforms

2005-11-10T02:37:51Z

This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras

[PATCH] powerpc: Merge cacheflush.h and cache.h

2005-11-10T02:09:22Z

The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson Signed-off-by: Paul Mackerras

[PATCH] ppc64: SMU based macs cpufreq support

2005-11-08T00:17:34Z

CPU freq support using 970FX powertune facility for iMac G5 and SMU based single CPU desktop. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras

powerpc: Merge xmon

2005-10-28T12:53:37Z

The merged version follows the ppc64 version pretty closely mostly, and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version. The main difference for ppc64 is that the 'p' command to call show_state (which was always pretty dodgy) has been replaced by the ppc32 'p' command, which calls a given procedure (so in fact the old 'p' command behaviour can be achieved with 'p $show_state'). Signed-off-by: Paul Mackerras

powerpc: Make single-stepping emulation (mostly) usable on 32-bit

2005-10-28T12:48:08Z

The sc instruction emulation can't be done the same way on 32-bit as 64-bit yet, but this should work OK. Signed-off-by: Paul Mackerras

[PATCH] powerpc: Remove duplicate definition of set_tb()

2005-10-26T06:00:09Z

Somewhere along the line we got two definitions of set_tb(). They look to be identical although they're not textually identical. So remove the #ifdef CONFIG_PPC64 version, leaving the common version in time.h. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras

ppc: Various minor compile fixes

2005-10-11T12:08:12Z

This fixes up a variety of minor problems in compiling with ARCH=ppc arising from using the merged versions of various header files. A lot of the changes are just adding #include to files that use ppc_md or smp_ops_t. This also arranges for us to use semaphore.c, vecemu.c, vector.S and fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc. Signed-off-by: Paul Mackerras

powerpc: Merged processor.h.

2005-10-10T04:19:43Z

This adds register definitions from the ppc64 processor.h to reg.h, and makes a single merged processor.h. I moved __is_processor from the ppc64 system.h to the merged reg.h along with the PVR register constants. Signed-off-by: Paul Mackerras

powerpc: clean up after powermac build merge

2005-09-27T03:51:59Z

Complete moving arch/ppc64/kernel/mpic.h, include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h and include/asm-ppc64/kprobes.h Add arch/powerpc/platforms/Makefile and use it from arch/powerpc/Makefile Introduce OLDARCH temporarily so we can point back to the originating architecture Signed-off-by: Stephen Rothwell

powerpc: Merge enough to start building in arch/powerpc.

2005-09-26T06:04:21Z

This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras