kernel.git/fs/ocfs2/stack_user.c, branch linux-3.16.y

ocfs2: fix sparse non static symbol warning

2014-01-22T00:19:42Z

Fixes the following sparse warning: fs/ocfs2/stack_user.c:930:32: warning: symbol 'ocfs2_ls_ops' was not declared. Should it be static? Signed-off-by: Wei Yongjun Cc: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: use the new DLM operation callbacks while requesting new lockspace

2014-01-22T00:19:42Z

Attempt to use the new DLM operations. If it is not supported, use the traditional ocfs2_controld. To exchange ocfs2 versioning, we use the LVB of the version dlm lock. It first attempts to take the lock in EX mode (non-blocking). If successful (which means it is the first mount), it writes the version number and downconverts to PR lock. If it is unsuccessful, it reads the version from the lock. If this becomes the standard (with o2cb as well), it could simplify userspace tools to check if the filesystem is mounted on other nodes. Dan: Since ocfs2_protocol_version are two u8 values, the additional checks with LONG* don't make sense. Signed-off-by: Goldwyn Rodrigues Signed-off-by: Dan Carpenter Reviewed-by: Mark Fasheh Cc: Joel Becker Cc: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: framework for version LVB

2014-01-22T00:19:41Z

Use the native DLM locks for version control negotiation. Most of the framework is taken from gfs2/lock_dlm.c Signed-off-by: Goldwyn Rodrigues Reviewed-by: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: pass ocfs2_cluster_connection to ocfs2_this_node

2014-01-22T00:19:41Z

This is done to differentiate between using and not using controld and use the connection information accordingly. We need to be backward compatible. So, we use a new enum ocfs2_connection_type to identify when controld is used and when it is not. Signed-off-by: Goldwyn Rodrigues Reviewed-by: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: shift allocation ocfs2_live_connection to user_connect()

2014-01-22T00:19:41Z

We perform this because the DLM recovery callbacks will require the ocfs2_live_connection structure to record the node information when dlm_new_lockspace() is updated (in the last patch of the series). Before calling dlm_new_lockspace(), we need the structure ready for the .recover_done() callback, which would set oc_this_node. This is the reason we allocate ocfs2_live_connection beforehand in user_connect(). [AKPM] rc initialization is not required because it assigned in case of errors. It will be cleared by compiler anyways. Signed-off-by: Goldwyn Rodrigues Reveiwed-by: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: add DLM recovery callbacks

2014-01-22T00:19:41Z

These are the callbacks called by the fs/dlm code in case the membership changes. If there is a failure while/during calling any of these, the DLM creates a new membership and relays to the rest of the nodes. - recover_prep() is called when DLM understands a node is down. - recover_slot() is called once all nodes have acknowledged recover_prep and recovery can begin. - recover_done() is called once the recovery is complete. It returns the new membership. Signed-off-by: Goldwyn Rodrigues Reviewed-by: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dlm: add recovery callbacks

2012-01-04T14:56:31Z

These new callbacks notify the dlm user about lock recovery. GFS2, and possibly others, need to be aware of when the dlm will be doing lock recovery for a failed lockspace member. In the past, this coordination has been done between dlm and file system daemons in userspace, which then direct their kernel counterparts. These callbacks allow the same coordination directly, and more simply. Signed-off-by: David Teigland

ocfs2_connection_find() returns pointer to bad structure

2010-11-18T23:41:41Z

If ocfs2_live_connection_list is empty, ocfs2_connection_find() will return a pointer to the LIST_HEAD, cast as a ocfs2_live_connection. This can cause an oops when ocfs2_control_send_down() dereferences c->oc_conn: Call Trace: [] ocfs2_control_message+0x28c/0x2b0 [ocfs2_stack_user] [] ocfs2_control_write+0x35/0xb0 [ocfs2_stack_user] [] vfs_write+0xb8/0x1a0 [] ? do_page_fault+0x153/0x3b0 [] sys_write+0x51/0x80 [] system_call_fastpath+0x16/0x1b Fix by explicitly returning NULL if no match is found. Signed-off-by: dann frazier Signed-off-by: Joel Becker

Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl

2010-10-22T17:52:56Z

* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek

llseek: automatically add .llseek fop

2010-10-15T13:53:27Z

All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann Cc: Julia Lawall Cc: Christoph Hellwig