kernel.git/fs/nfs/blocklayout/blocklayout.c, branch linux-4.12.y

lib/vsprintf.c: remove %Z support

2017-02-28T02:43:47Z

Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan Cc: Andy Shevchenko Cc: Rasmus Villemoes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

pnfs/blocklayout: fix last_write_offset incorrectly set to page boundary

2016-10-13T20:42:53Z

Commit 41963c10c47a35185e68cb9049f7a3493c94d2d7 sets the block layout's last written byte to the offset of the end of the extent rather than the end of the write which incorrectly updates the inode's size for partial-page writes. Fixes: 41963c10c47a ("pnfs/blocklayout: update last_write_offset atomically with extents") Signed-off-by: Benjamin Coddington Reviewed-by: Christoph Hellwig Tested-by: Christoph Hellwig Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Anna Schumaker

pnfs/blocklayout: update last_write_offset atomically with extents

2016-08-23T15:41:38Z

Block/SCSI layout write completion may add committable extents to the extent tree before updating the layout's last-written byte under the inode lock. If a sync happens before this value is updated, then prepare_layoutcommit may find and encode these extents which would produce a LAYOUTCOMMIT request whose encoded extents are larger than the request's loca_length. Fix this by using a last-written byte value that is updated atomically with the extent tree so that commitable extents always match. Signed-off-by: Benjamin Coddington Signed-off-by: Trond Myklebust

block, fs, mm, drivers: use bio set/get op accessors

2016-06-07T19:41:38Z

This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie Reviewed-by: Hannes Reinecke Signed-off-by: Jens Axboe

block/fs/drivers: remove rw argument from submit_bio

2016-06-07T19:41:38Z

This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

2016-04-04T17:41:08Z

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ; - >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov Acked-by: Michal Hocko Signed-off-by: Linus Torvalds

Merge tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux

2016-03-25T02:50:32Z

Pull more nfsd updates from Bruce Fields: "Apologies for the previous request, which omitted the top 8 commits from my for-next branch (including the SCSI layout commits). Thanks to Trond for spotting my error!" This actually includes the new layout types, so here's that part of the pull message repeated: "Support for a new pnfs layout type from Christoph Hellwig. The new layout type is a variant of the block layout which uses SCSI features to offer improved fencing and device identification. Note this pull request also includes the client side of SCSI layout, with Trond's permission" * tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux: nfsd: use short read as well as i_size to set eof nfsd: better layoutupdate bounds-checking nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK nfsd: add SCSI layout support nfsd: move some blocklayout code nfsd: add a new config option for the block layout driver nfs/blocklayout: add SCSI layout support nfs4.h: add SCSI layout definitions

nfs/blocklayout: make sure making a aligned read request

2016-03-21T16:39:46Z

Only treat write goes up to the inode size as aligned request, because it always write PAGE_CACHE_SIZE, but read a dynamic size. Signed-off-by: Kinglong Mee Signed-off-by: Trond Myklebust

nfs/blocklayout: add SCSI layout support

2016-03-18T15:38:17Z

This is a trivial extension to the block layout driver to support the new SCSI layouts draft. There are three changes: - device identifcation through the SCSI VPD page. This allows us to directly use the udev generated persistent device names instead of requiring an expensive lookup by crawling every block device node in /dev and reading a signature for it. - use of SCSI persistent reservations to protect device access and allow for robust fencing. On the client sides this just means registering and unregistering a server supplied key. - an optimized LAYOUTCOMMIT payload that doesn't send unessecary fields to the server. Signed-off-by: Christoph Hellwig Acked-by: Trond Myklebust Signed-off-by: J. Bruce Fields

nfs/blocklayout: Fix bad using of page offset in bl_read_pagelist

2015-10-21T20:55:47Z

Blocklayout uses file offset for the read-back page's offset of first writing, it's definitely wrong, it writes data to bad address of page that cause userspace application segment fault. It must be the page base stored in header->args.pgbase. Also, the pg_offset has no influence with isect and extent length. Note: The offset of the non-first page is always zero. Ps: A test program will segment fault at read() as, #define _GNU_SOURCE #include #include #include #include #include #include #include int main(int argc, char **argv) { char buf[2049]; char *filename = NULL; int fd = -1; if (argc < 2) { printf("Usage: %s filename\n", argv[0]); return 0; } filename = argv[1]; fd = open(filename, O_RDONLY | O_DIRECT); if (fd < 0) { printf("Open %s fail: %m\n", filename); return 1; } lseek(fd, 2048, SEEK_SET); if (read(fd, buf, sizeof(buf) - 1) != (sizeof(buf) - 1)) printf("Read 4096 bityes data from %s fail: %m\n", filename); out: close(fd); return 0; } Signed-off-by: Kinglong Mee Signed-off-by: Trond Myklebust