kernel.git/fs/jbd2, branch linux-2.6.34.y

jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer

2014-02-10T21:11:26Z

commit 15291164b22a357cb211b618adfef4fa82fc0de3 upstream. journal_unmap_buffer()'s zap_buffer: code clears a lot of buffer head state ala discard_buffer(), but does not touch _Delay or _Unwritten as discard_buffer() does. This can be problematic in some areas of the ext4 code which assume that if they have found a buffer marked unwritten or delay, then it's a live one. Perhaps those spots should check whether it is mapped as well, but if jbd2 is going to tear down a buffer, let's really tear it down completely. Without this I get some fsx failures on sub-page-block filesystems up until v3.2, at which point 4e96b2dbbf1d7e81f22047a50f862555a6cb87cb and 189e868fa8fdca702eb9db9d8afc46b5cb9144c9 make the failures go away, because buried within that large change is some more flag clearing. I still think it's worth doing in jbd2, since ->invalidatepage leads here directly, and it's the right place to clear away these flags. Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" Signed-off-by: Paul Gortmaker

jbd/jbd2: validate sb->s_first in journal_get_superblock()

2014-02-10T21:10:45Z

commit 8762202dd0d6e46854f786bdb6fb3780a1625efe upstream. I hit a J_ASSERT(blocknr != 0) failure in cleanup_journal_tail() when mounting a fsfuzzed ext3 image. It turns out that the corrupted ext3 image has s_first = 0 in journal superblock, and the 0 is passed to journal->j_head in journal_reset(), then to blocknr in cleanup_journal_tail(), in the end the J_ASSERT failed. So validate s_first after reading journal superblock from disk in journal_get_superblock() to ensure s_first is valid. The following script could reproduce it: fstype=ext3 blocksize=1024 img=$fstype.img offset=0 found=0 magic="c0 3b 39 98" dd if=/dev/zero of=$img bs=1M count=8 mkfs -t $fstype -b $blocksize -F $img filesize=`stat -c %s $img` while [ $offset -lt $filesize ] do if od -j $offset -N 4 -t x1 $img | grep -i "$magic";then echo "Found journal: $offset" found=1 break fi offset=`echo "$offset+$blocksize" | bc` done if [ $found -ne 1 ];then echo "Magic \"$magic\" not found" exit 1 fi dd if=/dev/zero of=$img seek=$(($offset+23)) conv=notrunc bs=1 count=1 mkdir -p ./mnt mount -o loop $img ./mnt Cc: Jan Kara Signed-off-by: Eryu Guan Signed-off-by: "Theodore Ts'o" Signed-off-by: Paul Gortmaker

jbd/jbd2: validate sb->s_first in journal_get_superblock()

2013-01-16T21:45:04Z

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

jbd2: clean up an assertion in jbd2_journal_commit_transaction()

2010-02-24T17:11:20Z

commit_transaction has the same value as journal->j_running_transaction, so we can simplify the assert statement. Signed-off-by: dingdinghua Signed-off-by: "Theodore Ts'o"

jbd2: delay discarding buffers in journal_unmap_buffer

2010-02-15T21:35:42Z

Delay discarding buffers in journal_unmap_buffer until we know that "add to orphan" operation has definitely been committed, otherwise the log space of committing transation may be freed and reused before truncate get committed, updates may get lost if crash happens. Signed-off-by: dingdinghua Signed-off-by: "Theodore Ts'o"

ext4: Use slab allocator for sub-page sized allocations

2009-12-07T15:36:20Z

Now that the SLUB seems to be fixed so that it respects the requested alignment, use kmem_cache_alloc() to allocator if the block size of the buffer heads to be allocated is less than the page size. Previously, we were using 16k page on a Power system for each buffer, even when the file system was using 1k or 4k block size. Signed-off-by: "Theodore Ts'o"

ext4: Add new tracepoint for jbd2_cleanup_journal_tail

2009-12-23T12:45:44Z

Signed-off-by: "Theodore Ts'o"

jbd2: don't use __GFP_NOFAIL in journal_init_common()

2009-12-23T13:05:15Z

It triggers the warning in get_page_from_freelist(), and it isn't appropriate to use __GFP_NOFAIL here anyway. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14843 Reported-by: Christian Casteyde Signed-off-by: Andrew Morton Signed-off-by: "Theodore Ts'o"

ext4, jbd2: Add barriers for file systems with exernal journals

2009-12-23T11:52:08Z

This is a bit complicated because we are trying to optimize when we send barriers to the fs data disk. We could just throw in an extra barrier to the data disk whenever we send a barrier to the journal disk, but that's not always strictly necessary. We only need to send a barrier during a commit when there are data blocks which are must be written out due to an inode written in ordered mode, or if fsync() depends on the commit to force data blocks to disk. Finally, before we drop transactions from the beginning of the journal during a checkpoint operation, we need to guarantee that any blocks that were flushed out to the data disk are firmly on the rust platter before we drop the transaction from the journal. Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4. Signed-off-by: "Theodore Ts'o"