kernel.git/fs/gfs2/inode.c, branch linux-3.11.y

GFS2: Check for glock already held in gfs2_getxattr

2013-08-19T08:33:57Z

Since the introduction of atomic_open, gfs2_getxattr can be called with the glock already held, so we need to allow for this. Signed-off-by: Steven Whitehouse Reported-by: David Teigland Tested-by: David Teigland

GFS2: Fix typo in gfs2_create_inode()

2013-08-19T08:32:29Z

PTR_RET should be PTR_ERR Reported-by: Sachin Kamat Cc: Rusty Russell Signed-off-by: Steven Whitehouse

GFS2: Add atomic_open support

2013-06-14T10:17:15Z

I've restricted atomic_open to only operate on regular files, although I still don't understand why atomic_open should not be possible also for directories on GFS2. That can always be added in later though, if it makes sense. The ->atomic_open function can be passed negative dentries, which in most cases means either ENOENT (->lookup) or a call to d_instantiate (->create). In the GFS2 case though, we need to actually perform the look up, since we do not know whether there has been a new inode created on another node. The look up calls d_splice_alias which then tries to rehash the dentry - so the solution here is to simply check for that in d_splice_alias. The same issue is likely to affect any other cluster filesystem implementing ->atomic_open Signed-off-by: Steven Whitehouse Cc: Al Viro Cc: "J. Bruce Fields" Cc: Jeff Layton

GFS2: Only do one directory search on create

2013-06-11T12:45:29Z

Creation of a new inode requires a directory search in order to ensure that we are not trying to create an inode with the same name as an existing one. This was hidden away inside the create_ok() function. In the case that there was an existing inode, and a lookup can be substituted for a create (which is the case with regular files when the O_EXCL flag is not in use) then we were doing a second lookup in order to return the inode. This patch merges these two lookups into one. This can be done by passing a flag to gfs2_dir_search() to tell it to just return -EEXIST in the cases where we don't actually want to look up the inode. Signed-off-by: Steven Whitehouse

GFS2: Cocci spatch "ptr_ret.spatch"

2013-06-05T08:51:08Z

Use PTR_RET in place of open coding this function. Signed-off-by: Thomas Meyer Signed-off-by: Steven Whitehouse

GFS2: Don't cache iopen glocks

2013-06-03T15:40:22Z

This patch makes GFS2 immediately reclaim/delete all iopen glocks as soon as they're dequeued. This allows deleters to get an EXclusive lock on iopen so files are deleted properly instead of being set as unlinked. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse

GFS2: Use gfs2_dinode_out() in the inode create path

2013-04-08T07:40:37Z

Over the previous two patches relating to inode creation, the content of init_dinode() has been looking more and more like gfs2_dinode_out(). This is not an accident! This patch replaces the parts of init_dinode() which are duplicated in gfs2_dinode_out() with a call to that function. Mostly that is straightforward, but there is one issue which needed to be resolved relating to the link count. The link count has to be set to zero in a certain error handling code path, which lands up calling iput(). This is now done specifically in that code path allowing the link count to be set earlier and written into the on disk inode by gfs2_dinode_put() in the normal way. Signed-off-by: Steven Whitehouse

GFS2: Remove gfs2_refresh_inode from inode creation path

2013-04-08T07:40:17Z

The original method for creating inodes used in GFS2 was to fill out a buffer, with all the information, and then to read that buffer into the in-core inode, using gfs2_refresh_inode() The problem with this approach is that all the inode's fields need to be calculated ahead of time, and were stored in various variables making the code rather complicated. The new approach is simply to allocate the in-core inode earlier and fill in as many fields as possible ahead of time. These can then be used to initilise the on disk representation. The code has been working towards the point where it is possible to remove gfs2_refresh_inode() because all the fields are correctly initialised ahead of time. We've now reached that milestone, and have reversed the order of setting up the in core and on disk inodes. Signed-off-by: Steven Whitehouse

GFS2: Clean up inode creation path

2013-04-08T07:39:56Z

This patch cleans up the inode creation code path in GFS2. After the Orlov allocator was merged, a number of potential improvements are now possible, and this is a first set of these. The quota handling is now updated so that it matches the point in the code where the allocation takes place. This means that the one exception in gfs2_alloc_blocks relating to quota is now no longer required, and we can use the generic code everywhere. In addition the call to figure out whether we need to allocate any extra blocks in order to add a directory entry is moved higher up gfs2_create_inode. This means that if it returns an error, we can deal with that at a stage where it is easier to handle that case. The returned status cannot change during the function since we hold an exclusive lock on the directory. Two calls to gfs2_rindex_update have been changed to one, again at the top of gfs2_create_inode to simplify error handling. The time stamps are also now initialised earlier in the creation process, this is gradually moving towards being able to remove the call to gfs2_refresh_inode in gfs2_inode_create once we have all the fields covered. Signed-off-by: Steven Whitehouse

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2013-02-26T00:00:49Z

Pull user namespace and namespace infrastructure changes from Eric W Biederman: "This set of changes starts with a few small enhnacements to the user namespace. reboot support, allowing more arbitrary mappings, and support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the user namespace root. I do my best to document that if you care about limiting your unprivileged users that when you have the user namespace support enabled you will need to enable memory control groups. There is a minor bug fix to prevent overflowing the stack if someone creates way too many user namespaces. The bulk of the changes are a continuation of the kuid/kgid push down work through the filesystems. These changes make using uids and gids typesafe which ensures that these filesystems are safe to use when multiple user namespaces are in use. The filesystems converted for 3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The changes for these filesystems were a little more involved so I split the changes into smaller hopefully obviously correct changes. XFS is the only filesystem that remains. I was hoping I could get that in this release so that user namespace support would be enabled with an allyesconfig or an allmodconfig but it looks like the xfs changes need another couple of days before it they are ready." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits) cifs: Enable building with user namespaces enabled. cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t cifs: Convert struct cifs_sb_info to use kuids and kgids cifs: Modify struct smb_vol to use kuids and kgids cifs: Convert struct cifsFileInfo to use a kuid cifs: Convert struct cifs_fattr to use kuid and kgids cifs: Convert struct tcon_link to use a kuid. cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t cifs: Convert from a kuid before printing current_fsuid cifs: Use kuids and kgids SID to uid/gid mapping cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc cifs: Use BUILD_BUG_ON to validate uids and gids are the same size cifs: Override unmappable incoming uids and gids nfsd: Enable building with user namespaces enabled. nfsd: Properly compare and initialize kuids and kgids nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids nfsd: Modify nfsd4_cb_sec to use kuids and kgids nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion nfsd: Convert nfsxdr to use kuids and kgids nfsd: Convert nfs3xdr to use kuids and kgids ...