kernel.git/fs/btrfs/super.c, branch linux-5.8.y

btrfs: reset compression level for lzo on remount

2020-09-03T09:29:39Z

commit 282dd7d7718444679b046b769d872b188818ca35 upstream. Currently a user can set mount "-o compress" which will set the compression algorithm to zlib, and use the default compress level for zlib (3): relatime,compress=zlib:3,space_cache If the user remounts the fs using "-o compress=lzo", then the old compress_level is used: relatime,compress=lzo:3,space_cache But lzo does not expose any tunable compression level. The same happens if we set any compress argument with different level, also with zstd. Fix this by resetting the compress_level when compress=lzo is specified. With the fix applied, lzo is shown without compress level: relatime,compress=lzo,space_cache CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Marcos Paulo de Souza Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: make sure SB_I_VERSION doesn't get unset by remount

2020-08-21T11:14:51Z

commit faa008899a4db21a2df99833cb4ff6fa67009a20 upstream. There's some inconsistency around SB_I_VERSION handling with mount and remount. Since we don't really want it to be off ever just work around this by making sure we don't get the flag cleared on remount. There's a tiny cpu cost of setting the bit, otherwise all changes to i_version also change some of the times (ctime/mtime) so the inode needs to be synced. We wouldn't save anything by disabling it. Reported-by: Eric Sandeen CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik Reviewed-by: David Sterba [ add perf impact analysis ] Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: fix messages after changing compression level by remount

2020-08-21T11:14:51Z

commit 27942c9971cc405c60432eca9395e514a2ae9f5e upstream. Reported by Forza on IRC that remounting with compression options does not reflect the change in level, or at least it does not appear to do so according to the messages: mount -o compress=zstd:1 /dev/sda /mnt mount -o remount,compress=zstd:15 /mnt does not print the change to the level to syslog: [ 41.366060] BTRFS info (device vda): use zstd compression, level 1 [ 41.368254] BTRFS info (device vda): disk space caching is enabled [ 41.390429] BTRFS info (device vda): disk space caching is enabled What really happens is that the message is lost but the level is actualy changed. There's another weird output, if compression is reset to 'no': [ 45.413776] BTRFS info (device vda): use no compression, level 4 To fix that, save the previous compression level and print the message in that case too and use separate message for 'no' compression. CC: stable@vger.kernel.org # 4.19+ Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: don't show full path of bind mounts in subvol=

2020-08-21T11:14:50Z

commit 3ef3959b29c4a5bd65526ab310a1a18ae533172a upstream. Chris Murphy reported a problem where rpm ostree will bind mount a bunch of things for whatever voodoo it's doing. But when it does this /proc/mounts shows something like /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0 Despite subvolid=256 being subvol=/foo. This is because we're just spitting out the dentry of the mount point, which in the case of bind mounts is the source path for the mountpoint. Instead we should spit out the path to the actual subvol. Fix this by looking up the name for the subvolid we have mounted. With this fix the same test looks like this /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 Reported-by: Chris Murphy CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: don't traverse into the seed devices in show_devname

2020-08-21T11:14:49Z

commit 4faf55b03823e96c44dc4e364520000ed3b12fdb upstream. ->show_devname currently shows the lowest devid in the list. As the seed devices have the lowest devid in the sprouted filesystem, the userland tool such as findmnt end up seeing seed device instead of the device from the read-writable sprouted filesystem. As shown below. mount /dev/sda /btrfs mount: /btrfs: WARNING: device write-protected, mounted read-only. findmnt --output SOURCE,TARGET,UUID /btrfs SOURCE TARGET UUID /dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111 btrfs dev add -f /dev/sdb /btrfs umount /btrfs mount /dev/sdb /btrfs findmnt --output SOURCE,TARGET,UUID /btrfs SOURCE TARGET UUID /dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111 All sprouts from a single seed will show the same seed device and the same fsid. That's confusing. This is causing problems in our prototype as there isn't any reference to the sprout file-system(s) which is being used for actual read and write. This was added in the patch which implemented the show_devname in btrfs commit 9c5085c14798 ("Btrfs: implement ->show_devname"). I tried to look for any particular reason that we need to show the seed device, there isn't any. So instead, do not traverse through the seed devices, just show the lowest devid in the sprouted fsid. After the patch: mount /dev/sda /btrfs mount: /btrfs: WARNING: device write-protected, mounted read-only. findmnt --output SOURCE,TARGET,UUID /btrfs SOURCE TARGET UUID /dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111 btrfs dev add -f /dev/sdb /btrfs mount -o rw,remount /dev/sdb /btrfs findmnt --output SOURCE,TARGET,UUID /btrfs SOURCE TARGET UUID /dev/sdb /btrfs 595ca0e6-b82e-46b5-b9e2-c72a6928be48 mount /dev/sda /btrfs1 mount: /btrfs1: WARNING: device write-protected, mounted read-only. btrfs dev add -f /dev/sdc /btrfs1 findmnt --output SOURCE,TARGET,UUID /btrfs1 SOURCE TARGET UUID /dev/sdc /btrfs1 ca1dbb7a-8446-4f95-853c-a20f3f82bdbb cat /proc/self/mounts | grep btrfs /dev/sdb /btrfs btrfs rw,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0 /dev/sdc /btrfs1 btrfs ro,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0 Reported-by: Martin K. Petersen CC: stable@vger.kernel.org # 4.19+ Tested-by: Martin K. Petersen Signed-off-by: Anand Jain Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: convert comments to fallthrough annotations

2020-07-02T08:18:30Z

Convert fall through comments to the pseudo-keyword which is now the preferred way. Signed-off-by: Marcos Paulo de Souza Reviewed-by: David Sterba Signed-off-by: David Sterba

btrfs: simplify iget helpers

2020-05-25T09:25:37Z

The inode lookup starting at btrfs_iget takes the full location key, while only the objectid is used to match the inode, because the lookup happens inside the given root thus the inode number is unique. The entire location key is properly set up in btrfs_init_locked_inode. Simplify the helpers and pass only inode number, renaming it to 'ino' instead of 'objectid'. This allows to remove temporary variables key, saving some stack space. Signed-off-by: David Sterba

btrfs: simplify root lookup by id

2020-05-25T09:25:36Z

The main function to lookup a root by its id btrfs_get_fs_root takes the whole key, while only using the objectid. The value of offset is preset to (u64)-1 but not actually used until btrfs_find_root that does the actual search. Switch btrfs_get_fs_root to use only objectid and remove all local variables that existed just for the lookup. The actual key for search is set up in btrfs_get_fs_root, reusing another key variable. Signed-off-by: David Sterba

btrfs: add more codes to decoder table

2020-05-25T09:25:28Z

I've grepped logs for 'errno=.*unknown' and found -95, -117 and -122, now added to the table. The wording is adjusted so it makes sense in context of filesystem. Reviewed-by: Anand Jain Signed-off-by: David Sterba

btrfs: sort error decoder entries

2020-05-25T09:25:28Z

Add the raw errnos and sort them accordingly. Reviewed-by: Anand Jain Signed-off-by: David Sterba