kernel.git/drivers/video/omap2/dss, branch linux-3.14.y

OMAPDSS: fix fck field types

2014-02-11T14:19:46Z

'fck' field in dpi and sdi clock calculation struct is 'unsigned long long', even though it should be 'unsigned long'. This hasn't caused any issues so far. Fix the field's type. Signed-off-by: Tomi Valkeinen

OMAPDSS: DISPC: decimation rounding fix

2014-02-11T14:19:41Z

The driver uses DIV_ROUND_UP when calculating decimated width & height. For example, when decimating with 3, the width is calculated as: width = DIV_ROUND_UP(width, decim_x); This yields bad results for some values. For example, 800/3=266.666..., which is rounded to 267. When the input width is set to 267, and pixel increment is set to 3, this causes the dispc to read a line of 801 pixels, i.e. it reads a wrong pixel at the end of the line. Even more pressing, the above rounding causes a BUG() in pixinc(), as the value of 801 is used to calculate row increment, leading to a bad value being passed to pixinc(). This patch fixes the decimation by removing the DIV_ROUND_UP()s when calculating width and height for decimation. Signed-off-by: Tomi Valkeinen

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2014-01-30T04:49:12Z

Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...

Merge branches '3.14/fbdev', '3.14/dss-misc' and '3.14/dss-fclk' into for-next

2014-01-20T08:57:01Z

Merge fbdev topic branches

OMAPDSS: DISPC: Fix 34xx overlay scaling calculation

2014-01-14T08:06:45Z

commit 7faa92339bbb1e6b9a80983b206642517327eb75 OMAPDSS: DISPC: Handle synclost errors in OMAP3 introduces limits check to prevent SYNCLOST errors on OMAP3. However, it misses the logic found in Nokia kernels that is needed to correctly calculate whether 3 tap or 5 tap rescaler to be used as well as the logic to fallback to 3 taps if 5 taps clock results in too tight horizontal timings. Without that patch "horizontal timing too tight" errors are seen when a video with resolution above 640x350 is tried to be played. The patch is a forward-ported logic found in Nokia N900 and N9/50 kernels. Signed-off-by: Ivaylo Dimitrov Signed-off-by: Tomi Valkeinen

OMAPDSS: DISPC: Preload more data in pipeline DMAs for OMAP4+ SoCs

2014-01-13T10:19:56Z

DISPC pipeline DMAs preload some bytes of pixel data in the vertical blanking region before the start of each frame. The preload ensures the pipeline doesn't underflow when the active region of the display starts. DISPC_GFX/VIDp_PRELOAD registers allow us to program how many bytes of data should be preloaded for each pipeline. Calculating a precise preload value would be a complex function of the pixel clock of the connected display, the vertical blanking duration and the interconnect traffic at that instance. If the register is left untouched, a default value is preloaded. We observe underflows for OMAP4+ SoCs for certain bandwidth intensive use cases with many other initiators active, and in situations where memory access isn't very efficient(like accessing Tiler mapped buffers and EMIF configured in non-interleaved more). The cause of the underflow is because the default preload value isn't sufficient for the DMA to reach a steady state. We configure the PRELOAD register such that the pipelines preload data up to the high threshold of the FIFO. Preloading lot of data for older SoCs can have a negative impact. Due to slower interconnects, it's possible that the DISPC DMA cannot preload up to the high threshold within the vertical blanking region of the panel. We leave the PRELOAD registers to their reset values since we haven't faced underflows with these SoCs because of low value of PRELOAD. Signed-off-by: Archit Taneja Signed-off-by: Tomi Valkeinen

OMAPDSS: don't print errors on -EPROBE_DEFER

2014-01-13T10:19:55Z

Nowadays it's normal to get -EPROBE_DEFER from, e.g., regulator_get. As -EPROBE_DEFER is not really an error, and the driver will be probed fine a bit later, printing an error message will just confuse the user. This patch changes omapdss to print an error for regulator_gets only if the error code is something else than -EPROBE_DEFER. Signed-off-by: Tomi Valkeinen

OMAPDSS: HDMI: rename resource names

2014-01-13T10:19:54Z

The HDMI driver tries to get the needed memory resources by name and by ID. Resources by name are not currently defined, and will be used with DT boot. The resource names used in the driver are not quite perfect, and as they are not used yet, we can change them. This patch removes the unneeded "hdmi_" prefix from the names, and simplifies the names (e.g. hdmi_txphy -> phy). Signed-off-by: Tomi Valkeinen

OMAPDSS: DSI: split DSI memory map to smaller blocks

2014-01-13T10:19:54Z

DSI contains three separate blocks: protocol engine, PHY and PLL. At the moment, all these are memory mapped in one big chunk. We need to split that memory map into smaller pieces so that we can add proper 'reg' properties into the DT data for each block. This patch changes the driver to map the blocks separately. It first tries to get the memory resource using name, used when booting with DT, and if that fails, it gets the memory resource by ID, in which case the driver gets the big chunk from platform data. That big chunk is then split into the smaller blocks manually. After DSS DT code has been merged and the old platform code removed, we can clean up the memory resource management. Instead of changing the driver in all the places where a register is read or written, this patch takes a shortcut: it adds an additional number to the struct which represents the register index. This number is used to decide which base address to use. In the future we should consider other approaches. Signed-off-by: Tomi Valkeinen

OMAPDSS: HDMI: add missing core irq

2014-01-13T10:19:53Z

HDMI_IRQ_CORE was not defined in the hdmi.h. Signed-off-by: Tomi Valkeinen