kernel.git/drivers/video/fbmon.c, branch linux-2.6.24.y

fbdev: fb_create_modedb() non-static `int first = 1;'

2007-10-16T16:43:15Z

Looking at the code flow, `int first' in fb_create_modedb() should be static. [adaplas] Better for 'int first' to be moved outside the loop. [akpm@linux-foundation.org: kill stray semicolon] Signed-off-by: Geert Uytterhoeven Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

fbdev: add Ultrasharp UXGA to broken monitor database

2007-05-08T18:15:26Z

This particular monitor does not have a limits block and has only one set of monitor timings. Fix by adding a limits block to the EDID and extend the horizontal sync frequency range to 30 kHz and 75 Khz. Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] various fbdev files: mark structs and array read-only

2006-12-08T16:29:05Z

- move some structs and arrays to the read-only (.rodata) section [akpm@osdl.org: build fix] Signed-off-by: Helge Deller Acked-by: James Simmons Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] vt: Remove VT-specific declarations and definitions from tty.h

2006-07-10T20:24:16Z

MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] fbdev: Firmware EDID fixes

2006-06-26T16:58:30Z

- make firmware edid independent from framebuffer (No need to choose framebuffer just to disable this option - enable this option in X86_64 - check if VBE/DDC function is implemented before calling actual function Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] fbdev: More accurate sync range extrapolation

2006-06-26T16:58:29Z

The EDID block should specify the display's operating limits (vertical and horizontal sync ranges, and maximum dot clock). If not given by the EDID block, the ranges are extrapolated from the modelist. However, the computation used is only a rough approximation, and the resulting values may not reflect the actual capability of the display. This problem is frequently encountered when the EDID block has a single entry, the single mode entry will fail validation. To prevent this, calculate the values based on the same method used in fb_validate_mode(). Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] fbdev: Remove duplicate #include's

2006-06-26T16:58:28Z

Remove unneeded duplicate #include's of the same header file. In the case of fbmon.c linux/pci.h is now #include'd unconditional, but this should be safe. Signed-off-by: Adrian Bunk Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] fbdev: Make BIOS EDID reading configurable

2006-03-27T16:44:55Z

DDC reading via the Video BIOS may take several tens of seconds with some combination of display cards and monitors. Make this option configurable. It defaults to `y' to minimise disruption. Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] fbdev: Replace kmalloc with kzalloc

2006-01-10T16:01:51Z

Replace kmalloc with kzalloc Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] fbdev: Reduce stack usage

2006-01-10T16:01:50Z

calc_mode_timings() and fb_get_mode() are using more than 500 bytes off the stack. Fix. Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds