kernel.git/drivers/usb/serial/option.c, branch linux-4.18.y

USB: serial: option: add two-endpoints device-id flag

2018-10-13T07:33:15Z

commit 35aecc02b5b621782111f64cbb032c7f6a90bb32 upstream. Allow matching on interfaces having two endpoints by adding a new device-id flag. This allows for the handling of devices whose interface numbers can change (e.g. Quectel EP06) to be contained in the device-id table. Tested-by: Kristian Evensen Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: improve Quectel EP06 detection

2018-10-13T07:33:15Z

commit 36cae568404a298a19a6e8a3f18641075d4cab04 upstream. The Quectel EP06 (and EM06/EG06) LTE modem supports updating the USB configuration, without the VID/PID or configuration number changing. When the configuration is updated and interfaces are added/removed, the interface numbers are updated. This causes our current code for matching EP06 not to work as intended, as the assumption about reserved interfaces no longer holds. If for example the diagnostic (first) interface is removed, option will (try to) bind to the QMI interface. This patch improves EP06 detection by replacing the current match with two matches, and those matches check class, subclass and protocol as well as VID and PID. The diag interface exports class, subclass and protocol as 0xff. For the other serial interfaces, class is 0xff and subclass and protocol are both 0x0. The modem can export the following devices and always in this order: diag, nmea, at, ppp. qmi and adb. This means that diag can only ever be interface 0, and interface numbers 1-5 should be marked as reserved. The three other serial devices can have interface numbers 0-3, but I have not marked any interfaces as reserved. The reason is that the serial devices are the only interfaces exported by the device where subclass and protocol is 0x0. QMI exports the same class, subclass and protocol values as the diag interface. However, the two interfaces have different number of endpoints, QMI has three and diag two. I have added a check for number of interfaces if VID/PID matches the EP06, and we ignore the device if number of interfaces equals three (and subclass is set). Signed-off-by: Kristian Evensen Acked-by: Dan Williams [ johan: drop uneeded RSVD(5) for ADB ] Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: option: add support for DW5821e

2018-08-22T05:43:42Z

commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. The patch explicitly ignores interfaces 0 and 1, as they're bound to other drivers already; and also interface 6, which is a GNSS interface for which we don't have a driver yet. T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-serial-4.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

2018-05-31T10:15:20Z

Johan writes: USB-serial updates for v4.18-rc1 Here are the USB-serial updates for 4.18-rc1, including: - support for hardware-assisted XON/XOFF output flow control for pl2303 - fix for a long-standing IXON/IXOFF mixup in ftdi_sio - blacklist of two apparently unused dwm-158 modem interfaces that confused some user space daemon (option) - add missing const to a tty helper currently used by USB serial only Included are also various clean ups. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold

USB: serial: option: adding support for ublox R410M

2018-05-02T07:15:22Z

This patch adds support for ublox R410M PID 0x90b2 USB modem to option driver, this module supports LTE Cat M1 / NB1. Interface layout: 0: QCDM/DIAG 1: ADB 2: AT 3: RMNET Signed-off-by: SZ Lin (林上智) Cc: stable Signed-off-by: Johan Hovold

USB: serial: option: blacklist unused dwm-158 interfaces

2018-05-02T07:09:48Z

The dwm-158 interface 4 and 5 doesn't answer to the AT commands and doesn't appears a option interface. Tested on openwrt distribution (kernel 4.14 using the old blacklist definitions). Lars Melin also writes: Blacklisting interface 4 and 5 is correct because: MI_00 D-Link Mobile Broadband Device (cdc_ether) MI_02 D-Link HSPA+DataCard Diagnostics Interface (also ppp modem) MI_03 D-Link HSPA+DataCard NMEA Device MI_04 D-Link HSPA+DataCard Speech Port MI_05 D-Link HSPA+DataCard Debug Port MI_06 USB Mass Storage Device Signed-off-by: Giuseppe Lippolis [ johan: add Lars's comment on the interface layout and reword summary ] Cc: Lars Melin Cc: Dan Williams Signed-off-by: Johan Hovold

USB: serial: option: use mass-storage class define

2018-03-19T11:20:18Z

Use the USB class define rather than a magic number when refusing to bind to mass-storage interfaces. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: option: drop redundant interface-class test

2018-03-19T11:20:11Z

Drop redundant interface-class test for Samsung GT-B3730 modems for which we only match and probe the CDC data interface. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: option: reimplement interface masking

2018-03-19T11:20:01Z

Reimplement interface masking using device flags stored directly in the device-id table. This will make it easier to add and maintain device-id entries by using a more compact and readable notation compared to the current implementation (which manages pairs of masks in separate blacklist structs). Two convenience macros are used to flag an interface as either reserved or as not supporting modem-control requests: { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), .driver_info = NCTRL(0) | RSVD(3) }, For now, we limit the highest maskable interface number to seven, which allows for (up to 16) additional device flags to be added later should need arise. Note that this will likely need to be backported to stable in order to make future device-id backports more manageable. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: option: Add support for Quectel EP06

2018-02-15T17:36:19Z

The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as follows: 0: Diag 1: NMEA 2: AT 3: Modem Interface 4 is QMI and interface 5 is ADB, so they are blacklisted. This patch should also be considered for -stable. The QMI-patch for this modem is already in the -stable-queue. v1->v2: * Updated commit prefix (thanks Johan Hovold) * Updated commit message slightly. Signed-off-by: Kristian Evensen Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman