kernel.git/drivers/usb/serial/option.c, branch linux-3.13.y

USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8

2014-03-07T06:06:24Z

commit 12df84d4a80278a5b1abfec3206795291da52fc9 upstream. This interface is to be handled by the qmi_wwan driver. CC: Hans-Christoph Schemmel CC: Christian Schmiedl CC: Nicolaus Colberg CC: David McCullough Signed-off-by: Aleksander Morgado Signed-off-by: Greg Kroah-Hartman

usb: option: blacklist ZTE MF667 net interface

2014-02-22T21:34:55Z

commit 3635c7e2d59f7861afa6fa5e87e2a58860ff514d upstream. Interface #5 of 19d2:1270 is a net interface which has been submitted to the qmi_wwan driver so consequently remove it from the option driver. Signed-off-by: Raymond Wanyoike Signed-off-by: Greg Kroah-Hartman

USB: serial: add support for iBall 3.5G connect usb modem

2014-02-06T19:33:53Z

commit 7d5c1b9c7cb5ec8e52b1adc65c484a923a8ea6c3 upstream. Add support for iBall 3.5G connect usb modem. $lsusb Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY $usb-devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9605 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Rahul Bedarkar Suggested-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

usb: option: add new zte 3g modem pids to option driver

2014-02-06T19:33:53Z

commit 4d90b819ae4c7ea8fd5e2bb7edc68c0f334be2e4 upstream. Signed-off-by: Jun zhang Signed-off-by: Greg Kroah-Hartman

usb: serial: zte_ev: move support for ZTE AC2726 from zte_ev back to option

2013-12-09T21:14:12Z

ZTE AC2726 EVDO modem drops ppp connection every minute when driven by zte_ev but works fine when driven by option. Move the support for AC2726 back to option driver. Signed-off-by: Dmitry Kunilov Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: option: support new huawei devices

2013-12-02T21:51:02Z

Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceProtocol value. Signed-off-by: fangxiaozhi Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: option: blacklist interface 1 for Huawei E173s-6

2013-12-02T21:50:54Z

Interface 1 on this device isn't for option to bind to otherwise an oops on usb_wwan with log flooding will happen when accessing the port: tty_release: ttyUSB1: read/write wait queue active! It doesn't seem to respond to QMI if it's added to qmi_wwan so don't add it there - it's likely used by the card reader. Signed-off-by: Gustavo Zacarias Cc: stable Signed-off-by: Greg Kroah-Hartman

USB：add new zte 3g-dongle's pid to option.c

2013-10-25T05:37:25Z

Signed-off-by: Rui li Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: serial: option: blacklist Olivetti Olicard200

2013-10-16T20:24:39Z

Interface 6 of this device speaks QMI as per tests done by us. Credits go to Antonella for providing the hardware. Signed-off-by: Enrico Mioso Signed-off-by: Antonella Pellizzari Tested-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for Inovia SEW858 device

2013-10-11T23:17:51Z

This patch adds the device id for the Inovia SEW858 device to the option driver. Reported-by: Pavel Parkhomenko Tested-by: Pavel Parkhomenko Cc: stable Signed-off-by: Greg Kroah-Hartman