kernel.git/drivers/usb/otg, branch linux-3.8.y

usb: otg: mv_otg: fix the clk APIs

2012-12-13T09:58:45Z

the clock common driver changes, and arch-mmp will make use of the common clock driver instead of its own. So for enable clock. first prepare the clock then enable the clock. for disable clock first disable the clock then unprepare the clock Signed-off-by: Chao Xie Signed-off-by: Felipe Balbi

USB: fix fsl_otg config dependency

2012-12-13T09:58:40Z

USB_GADGET_FSL_USB2 has been changed to USB_FSL_USB2 by commit 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b (usb: gadget: allow multiple gadgets to be built). But old USB_GADGET_FSL_USB2 is still listed as dependency for fsl_otg driver, so the driver cannot be selected in the configuration currently. Fix it. Signed-off-by: Anatolij Gustschin Signed-off-by: Felipe Balbi

usb: remove use of __devexit

2012-11-21T21:27:17Z

CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton Cc: Peter Korsgaard Cc: Alexander Shishkin Acked-by: Felipe Balbi Cc: Li Yang Cc: Alan Stern Cc: Wan ZongShun Cc: Ben Dooks Cc: Kukjin Kim Signed-off-by: Greg Kroah-Hartman

usb: remove use of __devinit

2012-11-21T21:27:16Z

CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton Cc: Peter Korsgaard Cc: Alexander Shishkin Acked-by: Felipe Balbi Cc: Li Yang Acked-by: Alan Stern Cc: Geoff Levand Cc: Wan ZongShun Cc: Olav Kongas Cc: Lennert Buytenhek Cc: Ben Dooks Cc: Kukjin Kim Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman

usb: remove use of __devexit_p

2012-11-21T21:27:16Z

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton Cc: Peter Korsgaard Cc: Alexander Shishkin Acked-by: Felipe Balbi Cc: Li Yang Cc: Alan Stern Cc: Wan ZongShun Cc: Ben Dooks Cc: Kukjin Kim Acked-by: Nicolas Ferre Acked-by: Peter Korsgaard Signed-off-by: Greg Kroah-Hartman

Merge 3.7-rc6 into usb-next.

2012-11-17T02:46:21Z

This resolves a conflict with these files: drivers/usb/early/ehci-dbgp.c drivers/usb/host/ehci-ls1x.c drivers/usb/host/ohci-xls.c drivers/usb/musb/ux500.c Signed-off-by: Greg Kroah-Hartman

usb: phy: change phy notify connect/disconnect API

2012-11-16T01:44:51Z

The old parameter "port" is useless for phy notify, as one usb phy is only for one usb port. New parameter "speed" stands for the device's speed which is on the port, this "speed" parameter is needed at some platforms which will do some phy operations according to device's speed. Signed-off-by: Peter Chen Tested-by: Mike Thompson Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: mxs-phy: re-init phy during the connection is useless

2012-11-16T01:44:51Z

As phy is working, re-init phy may cause unexpected results Signed-off-by: Peter Chen Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

Revert "usb: otg: mxs-phy: Fix mx23 operation"

2012-11-16T01:44:51Z

The real reason causes mx23 fail are: - Calling mxs_phy_hw_init(mxs_phy) again at connection - Error connect/disconnect nodity at hub.c The coming patch will fix above two problems, Mike Thompson tested his hardware works OK after commented out this delay setting. This reverts commit 363366cf61c544ea476f3d220f43a95cb03014f5. Signed-off-by: Peter Chen Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*

2012-11-14T20:15:49Z

To facilitate upcoming cleanup in twl stack. No functional changes. Signed-off-by: Peter Ujfalusi Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman