Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-3.6.y 2012-10-07T15:39:29Z 2012-10-07T15:39:29Z Mike Thompson 2012-08-30T21:26:25Z urn:sha1:2f710e1def8d4639f124f06aa08bc06c142efb84 commit 363366cf61c544ea476f3d220f43a95cb03014f5 upstream. Currently mx23 fails to enumerate a USB device: [ 1.300000] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1.520000] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1.740000] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1.960000] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2.180000] hub 1-0:1.0: unable to enumerate USB device on port 1 Use a kernel workqueue to asynchronously delay the setting of ENHOSTDISCONDETECT bit until after higher level hub connect/reset processing is complete. Prematurely setting the bit prevents the connection processing from completing and not setting it prevents disconnect from being detected. No delay is needed for clearing of ENHOSTDISCONDETECT. Successfully tested on mx23-olinuxino (micro, mini and maxi variants) and mx28evk. Signed-off-by: Mike Thompson <mpthompson@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-08-01T02:07:42Z Linus Torvalds 2012-08-01T02:07:42Z urn:sha1:3e9a97082fa639394e905e1fc4a0a7f719ca7644 Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ... 2012-07-26T17:23:47Z Linus Torvalds 2012-07-26T17:23:47Z urn:sha1:9fc377799bc9bfd8d5cb35d0d1ea2e2458cbdbb3 Pull USB patches from Greg Kroah-Hartman: "Here's the big USB patch set for the 3.6-rc1 merge window. Lots of little changes in here, primarily for gadget controllers and drivers. There's some scsi changes that I think also went in through the scsi tree, but they merge just fine. All of these patches have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up trivial conflicts in include/scsi/scsi_device.h (same libata conflict that Jeff had already encountered) * tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams usb: Add quirk detection based on interface information usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer USB: add USB_VENDOR_AND_INTERFACE_INFO() macro USB: notify phy when root hub port connect change USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds USB: option: add ZTE MF821D USB: sierra: QMI mode MC7710 moved to qcserial USB: qcserial: adding Sierra Wireless devices USB: qcserial: support generic Qualcomm serial ports USB: qcserial: make probe more flexible USB: qcserial: centralize probe exit path USB: qcserial: consolidate usb_set_interface calls USB: ehci-s5p: Add support for device tree USB: ohci-exynos: Add support for device tree USB: ehci-omap: fix compile failure(v1) usb: host: tegra: pass correct pointer in ehci_setup() USB: ehci-fsl: Update ifdef check to work on 64-bit ppc USB: serial: keyspan: Removed unrequired parentheses. ... 2012-07-19T14:40:14Z Theodore Ts'o 2012-07-17T18:02:16Z urn:sha1:34e4cc40a0b077ee28a66d989491b6777a49a778 With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a no-op; interrupt randomness is now collected unconditionally in a very low-overhead fashion; see commit 775f4b297b. The IRQF_SAMPLE_RANDOM flag was scheduled to be removed in 2009 on the feature-removal-schedule, so this patch is preparation for the final removal of this flag. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Felipe Balbi <balbi@ti.com> 2012-07-09T16:59:23Z Richard Zhao 2012-07-07T14:56:47Z urn:sha1:b3d99681227a8c5e1f50bccae0f55930aad2ca77 mxs phy is used in Freescale i.MX SoCs, for example imx23, imx28, imx6Q. This patch adds the basic host support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peter Chen <peter.chen@freescale.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-07-09T16:46:51Z Kishon Vijay Abraham I 2012-07-09T06:34:40Z urn:sha1:277bd8746bb8d23c00ff8343e58df783544e961e Fixed a mistake in the merge conflict resoultion commit(ff9cce) in file twl6030-usb.c Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-07-05T22:35:41Z Greg Kroah-Hartman 2012-07-05T22:35:41Z urn:sha1:ff9cce82772a78983b529e044d85884d3ec95fda usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap. 2012-07-03T19:54:55Z Arnd Bergmann 2012-07-03T19:54:55Z urn:sha1:1fe406186482305bfb77967c59a64367d3fd8088 From Tony Lindgren <tony@atomide.com> Here is some more omap clean-up. The biggest changes are hwmod, clock, and System Control Module cleanup, and the removal of the last instance of omap_read/write usage for omap2+ with the removal of unused USB OHCI Full Speed driver support. The removed OHCI is only currently used for omap1 as the actively used omap2+ boards have either MUSB or another instance of OHCI+EHCI that's more usable. * tag 'omap-cleanup-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: hwmod: remove prm_clkdm, cm_clkdm; allow hwmods to have no clockdomain ARM: OMAP3: Move McBSP fck clock alias to hwmod data ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2430 ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2420 ARM: OMAP: dsp: interface to control module functions ARM: OMAP2+: control: new APIs to configure boot address and mode ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data ARM: OMAP2+: hwmod: use init-time function pointer for _init_clkdm ARM: OMAP2+: hwmod: use init-time function pointer for hardreset ARM: OMAP2+: hwmod: use init-time function pointer for wait_target_ready ARM: OMAP4: hwmod: drop extra cpu_is check from _wait_target_disable() ARM: OMAP2+: hwmod: use init-time function ptrs for enable/disable module ARM: OMAP4: hwmod: rename _enable_module to _omap4_enable_module() ARM: OMAP: Make FS USB omap1 only ARM: OMAP2: Remove legacy USB FS support ARM: OMAP3: There is no FS USB controller on omap3 ARM: OMAP: dma: Clear status registers on enable/disable irq Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2012-07-02T07:41:00Z Kishon Vijay Abraham I 2012-07-02T06:50:24Z urn:sha1:f8ecf829481b2cc7301a811da9d2df53ef174977 spin_unlock_irqrestore() was not being called in the error path of usb_get_phy. It's fixed here. Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 2012-07-02T07:40:49Z Kishon Vijay Abraham I 2012-06-26T12:10:32Z urn:sha1:ded017ee6c7b90f7356bd8488f8af1c10ba90490 usb_get_phy will return -ENODEV if it's not able to find the phy. Hence fixed all the callers of usb_get_phy to check for this error condition instead of relying on a non-zero value as success condition. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>