kernel.git/drivers/usb/otg/Makefile, branch linux-3.2.y

USB: add Freescale USB OTG Transceiver driver

2011-05-02T23:59:38Z

Slightly reworked and cleaned up driver from Freescale LTIB for MPC5121E. The driver has been ported to the current kernel, proc interface "/proc/driver/fsl_usb2_otg" has been replaced by sysfs interface. Signed-off-by: Li Yang Signed-off-by: Anatolij Gustschin Signed-off-by: Greg Kroah-Hartman

usb: otg: Add ulpi viewport access ops

2011-03-11T22:22:10Z

Add generic access ops for controllers with a ulpi viewport register (e.g. Chipidea/ARC based controllers). Signed-off-by: Benoit Goby Signed-off-by: Greg Kroah-Hartman

USB: Rename "msm72k_otg.c" to "msm_otg.c"

2011-03-07T20:15:21Z

This driver is used across all MSM SoCs. Hence give a generic name. All Functions and strutures are also using "msm_otg" as prefix. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman

Merge branch 'musb-hw' of git://gitorious.org/usb/usb into musb

2010-12-15T17:29:38Z

* 'musb-hw' of git://gitorious.org/usb/usb: (43 commits) usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource arm: OMAP4430: musb: Configure musb to OTG mode usb: musb: Adding musb support for OMAP4430 usb: otg: TWL6030: Add twl6030_usb file for compilation mfd: TWL6030: OMAP4: Registering the TWL6030-usb device usb: musb: TWL6030: Selecting TWL6030_USB transceiver usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver. usb: otg: Adding twl6030-usb transceiver driver for OMAP4430 mfd: TWL6030: USBOTG VBUS event generation on usb: musb: add support for ux500 platform musb: am35x: fix compile error due to control apis arm: omap4: enable usb on 4430sdp usb: musb: drop board_set_vbus usb: musb: drop musb_platform_suspend/resume usb: musb: blackfin: usb dev_pm_ops structure usb: musb: am35x: usb dev_pm_ops structure usb: musb: omap2430: use dev_pm_ops structure usb: musb: omap2430: drop the nops usb: musb: mark musb_save/restore_context static ...

usb: add ab8500 usb transceiver driver

2010-12-10T22:27:33Z

Basic driver for ab8500 usb otg transceiver TODO: -Regulators support -Host and OTG testing -Interface with PRCMU -Charging support Signed-off-by: Mian Yousaf Kaukab Acked-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

USB: Add MSM OTG Controller driver

2010-12-10T22:23:31Z

This driver implements PHY initialization, clock management, ULPI IO ops and simple OTG state machine to kick host/peripheral based on Id/VBUS line status. VBUS/Id lines are tied to a reference voltage on some boards. Hence provide debugfs interface to select host/peripheral mode. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman

usb: otg: TWL6030: Add twl6030_usb file for compilation

2010-12-10T12:47:45Z

Add the twl6030_usb transceiver file for compilation. Signed-off-by: Hema HK Signed-off-by: Felipe Balbi

usb: makefile cleanup

2010-10-22T17:22:07Z

For all modules, change -objs to -y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney Acked-by: Sam Ravnborg Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: Add Intel Langwell USB OTG Transceiver Driver

2010-10-22T17:21:17Z

This adds support for the USB transceiver driver in the Langwell chipset used on the Intel MID platforms. It folds up the original patch set which includes basic support for the device, PHY low power mode (Please notice that there is a limitation, after we drive VBus down, 2ms delay is required from SCU FW to sync up OTGSC register with USBCFG register), software timers (the hardware timers do not work in low power mode), HNP, SRP. Signed-off-by: Hao Wu Signed-off-by: Alek Du Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman

USB OTG: Add generic driver for ULPI OTG transceiver

2009-12-11T19:55:16Z

This adds a minimal generic driver for ULPI connected transceivers, using the OTG framework functions recently introduced. The driver got a table to match the ULPI chips, which currently only has one entry for NXP's ISP 1504 transceiver. Signed-off-by: Daniel Mack Cc: Heikki Krogerus Cc: David Brownell Cc: Sascha Hauer Signed-off-by: Greg Kroah-Hartman