kernel.git/drivers/usb/mtu3, branch linux-5.16.y

usb: mtu3: set interval of FS intr and isoc endpoint

2021-12-21T08:05:45Z

Add support to set interval also for FS intr and isoc endpoint. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20211218095749.6250-4-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: fix list_head check warning

2021-12-21T08:05:45Z

This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4 Fixes: 83374e035b62 ("usb: mtu3: add tracepoints to help debug") Cc: stable@vger.kernel.org Reported-by: Yuwen Ng Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20211218095749.6250-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: add memory barrier before set GPD's HWO

2021-12-21T08:05:44Z

There is a seldom issue that the controller access invalid address and trigger devapc or emimpu violation. That is due to memory access is out of order and cause gpd data is not correct. Add mb() to prohibit compiler or cpu from reordering to make sure GPD is fully written before setting its HWO. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Cc: stable@vger.kernel.org Reported-by: Eddie Hung Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20211218095749.6250-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: fix interval value for intr and isoc

2021-12-21T08:05:44Z

Use the Interval value from isoc/intr endpoint descriptor, no need minus one. The original code doesn't cause transfer error for normal cases, but it may have side effect with respond time of ERDY or tPingTimeout. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: enable wake-up interrupt after runtime_suspend called

2021-10-27T18:49:32Z

Use the new API dev_pm_set_dedicated_wake_irq_reverse() to request dedicated wake-up interrupt, due to we want to enable the wake IRQ after running ->runtime_suspend(). Signed-off-by: Chunfeng Yun Signed-off-by: Rafael J. Wysocki

usb: mtu3: fix random remote wakeup

2021-08-26T11:41:52Z

Some platforms, e.g. 8183/8192, use low level latch way to keep wakeup signal, it may latch a wrong signal if debounce more time, and enable wakeup earlier. ____________________ ip_sleep ____/ \__________ ___________________ wakeup_signal ____________/ \______ _______________________________ wakeup_en _______/ ^ ^ |(1) |(2) latch wakeup_signal mistakenly at (1), should latch it at (2); Workaround: delay about 100us to enable wakeup, meanwhile decrease debounce time. Fixes: b1a344589eea ("usb: mtu3: support ip-sleep wakeup for MT8183") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20210826083637.33237-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: return successful suspend status

2021-08-26T11:41:52Z

Forgot 'return 0;' when suspend successfully, make the mistake when I split patches. Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode") Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20210826083637.33237-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: fix the wrong HS mult value

2021-08-13T11:05:50Z

usb_endpoint_maxp() returns actual max packet size, @mult will always be zero, fix it by using usb_endpoint_maxp_mult() instead to get mult. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: use @mult for HS isoc or intr

2021-08-13T11:05:50Z

For HS isoc or intr, should use @mult but not @burst to save mult value. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: mtu3: restore HS function when set SS/SSP

2021-08-13T11:05:50Z

Due to HS function is disabled when set as FS, need restore it when set as SS/SSP. Fixes: dc4c1aa7eae9 ("usb: mtu3: add ->udc_set_speed()") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman