kernel.git/drivers/usb/misc/usb3503.c, branch linux-5.14.y

usb: misc: usb3503: Fix logic in usb3503_init()

2021-02-11T12:52:04Z

Based on https://lore.kernel.org/linux-arm-kernel/YCJv59g3Tq2haDSa@kroah.com/ initialization should fail if any registration fails. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/a8547f6fe698014df08cad3bcc9c5d9a7137d8b8.1612873935.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman

usb/misc: usb3503: Use pm_ptr() macro

2020-09-04T14:53:57Z

Use the newly introduced pm_ptr() macro, and mark the suspend/resume functions __maybe_unused. These functions can then be moved outside the CONFIG_PM_SUSPEND block, and the compiler can then process them and detect build failures independently of the config. If unused, they will simply be discarded by the compiler. Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20200903112554.34263-8-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman

usb: usb3503: Convert to use GPIO descriptors

2019-12-30T19:40:19Z

This converts the USB3503 to pick GPIO descriptors from the device tree instead of iteratively picking out GPIO number references and then referencing these from the global GPIO numberspace. The USB3503 is only used from device tree among the in-tree platforms. If board files would still desire to use it they can provide machine descriptor tables. Make sure to preserve semantics such as the reset delay introduced by Stefan. Cc: Chunfeng Yun Cc: Marek Szyprowski Cc: Stefan Agner Cc: Krzysztof Kozlowski Signed-off-by: Linus Walleij [mszyprow: invert the logic behind reset GPIO line] Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20191211145226.25074-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman

usb: misc: usb3503: get optional clock by devm_clk_get_optional()

2019-04-19T12:24:25Z

When the driver tries to get optional clock, it ignores all errors except -EPROBE_DEFER, but if only ignores -ENOENT, it will cover some real errors, such as -ENOMEM, so use devm_clk_get_optional() to get optional clock. And remove unnecessary stack variable clk. Cc: Dongjin Kim Signed-off-by: Chunfeng Yun Signed-off-by: Greg Kroah-Hartman

usb: misc: usb3503: Add system sleep support in non-I2C mode

2019-01-25T09:02:50Z

USB3503 chip can be used without any I2C connection, what is handled by a simple platform device driver. Add support for resetting the chip (via GPIO lines) during system suspend/resume cycle by adding calls to existing suspend/resume functions used for E2C device. Signed-off-by: Marek Szyprowski Signed-off-by: Greg Kroah-Hartman

usb: misc: usb3503: make sure reset is low for at least 100us

2018-01-11T17:39:52Z

When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by: Stefan Agner Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: misc: Remove redundant license text

2017-11-04T10:55:38Z

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Keith Packard Cc: Juergen Stuber Cc: Cesar Miquel Cc: Richard Leitner Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02Z

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: misc: usb3503: Clean up on driver unbind

2016-06-08T05:19:59Z

The driver should clean up after itself by unpreparing the clock when it is unbound. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Greg Kroah-Hartman

usb: misc: usb3503: Set platform data

2016-06-08T05:19:59Z

Driver supports two paths of device instantiation: as platform and i2c device. In the platform path it lacks of storing the driver specific structure as drvdata. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman