kernel.git/drivers/usb/host, branch linux-6.12.y

USB: OHCI/UHCI: Add soft dependencies on ehci_platform

2026-01-23T10:18:45Z

commit 01ef7f1b8713a78ab1a9512cf8096d2474c70633 upstream. Commit 9beeee6584b9aa4f ("USB: EHCI: log a warning if ehci-hcd is not loaded first") said that ehci-hcd should be loaded before ohci-hcd and uhci-hcd. However, commit 05c92da0c52494ca ("usb: ohci/uhci - add soft dependencies on ehci_pci") only makes ohci-pci/uhci-pci depend on ehci- pci, which is not enough and we may still see the warnings in boot log. To eliminate the warnings we should make ohci-hcd/uhci-hcd depend on ehci-hcd. But Alan said that the warning introduced by 9beeee6584b9aa4f is bogus, we only need the soft dependencies in the PCI level rather than the HCD level. However, there is really another neccessary soft dependencies between ohci-platform/uhci-platform and ehci-platform, which is added by this patch. The boot logs are below. 1. ohci-platform loaded before ehci-platform: ohci-platform 1f058000.usb: Generic Platform OHCI controller ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 1 ohci-platform 1f058000.usb: irq 28, io mem 0x1f058000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after usb 1-4: new low-speed USB device number 2 using ohci-platform ehci-platform 1f050000.usb: EHCI Host Controller ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 2 ehci-platform 1f050000.usb: irq 29, io mem 0x1f050000 ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00 usb 1-4: device descriptor read/all, error -62 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected usb 1-4: new low-speed USB device number 3 using ohci-platform input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb1/1-4/1-4:1.0/0003:10C4:8105.0001/input/input0 hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0 2. ehci-platform loaded before ohci-platform: ehci-platform 1f050000.usb: EHCI Host Controller ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1f050000.usb: irq 28, io mem 0x1f050000 ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci-platform 1f058000.usb: Generic Platform OHCI controller ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 2 ohci-platform 1f058000.usb: irq 29, io mem 0x1f058000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected usb 2-4: new low-speed USB device number 2 using ohci-platform input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb2/2-4/2-4:1.0/0003:10C4:8105.0001/input/input0 hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0 In the later case, there is no re-connection for USB-1.0/1.1 devices, which is expected. Cc: stable Reported-by: Shengwen Xiao Signed-off-by: Huacai Chen Reviewed-by: Alan Stern Link: https://patch.msgid.link/20260112084802.1995923-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman

xhci: dbgtty: fix device unregister: fixup

2026-01-08T09:14:56Z

[ Upstream commit 74098cc06e753d3ffd8398b040a3a1dfb65260c0 ] This fixup replaces tty_vhangup() call with call to tty_port_tty_vhangup(). Both calls hangup tty device synchronously however tty_port_tty_vhangup() increases reference count during the hangup operation using scoped_guard(tty_port_tty). Cc: stable Fixes: 1f73b8b56cf3 ("xhci: dbgtty: fix device unregister") Signed-off-by: Łukasz Bartosik Link: https://patch.msgid.link/20251127111644.3161386-1-ukaszb@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: ohci-nxp: fix device leak on probe failure

2026-01-08T09:14:17Z

commit b4c61e542faf8c9131d69ecfc3ad6de96d1b2ab8 upstream. Make sure to drop the reference taken when looking up the PHY I2C device during probe on probe failure (e.g. probe deferral) and on driver unbind. Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver") Cc: stable@vger.kernel.org # 3.5 Reported-by: Ma Ke Link: https://lore.kernel.org/lkml/20251117013428.21840-1-make24@iscas.ac.cn/ Signed-off-by: Johan Hovold Acked-by: Alan Stern Reviewed-by: Vladimir Zapolskiy Link: https://patch.msgid.link/20251218153519.19453-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: xhci: limit run_graceperiod for only usb 3.0 devices

2026-01-08T09:14:11Z

[ Upstream commit 8d34983720155b8f05de765f0183d9b0e1345cc0 ] run_graceperiod blocks usb 2.0 devices from auto suspending after xhci_start for 500ms. Log shows: [ 13.387170] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100 [ 13.387177] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 13.387182] hub_suspend:3903: hub 7-0:1.0: hub_suspend [ 13.387188] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1 [ 13.387191] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event [ 13.387193] hcd_bus_resume:2303: usb usb7: usb auto-resume [ 13.387296] hub_event:5779: hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 13.393343] handle_port_status:2034: xhci-hcd PNP0D10:02: handle_port_status: starting usb5 port polling. [ 13.393353] xhci_hub_control:1271: xhci-hcd PNP0D10:02: Get port status 5-1 read: 0x206e1, return 0x10101 [ 13.400047] hub_suspend:3903: hub 3-0:1.0: hub_suspend [ 13.403077] hub_resume:3948: hub 7-0:1.0: hub_resume [ 13.403080] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100 [ 13.403085] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 13.403087] hub_suspend:3903: hub 7-0:1.0: hub_suspend [ 13.403090] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1 [ 13.403093] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event [ 13.403095] hcd_bus_resume:2303: usb usb7: usb auto-resume [ 13.405002] handle_port_status:1913: xhci-hcd PNP0D10:04: Port change event, 9-1, id 1, portsc: 0x6e1 [ 13.405016] hub_activate:1169: usb usb5-port1: status 0101 change 0001 [ 13.405026] xhci_clear_port_change_bit:658: xhci-hcd PNP0D10:02: clear port1 connect change, portsc: 0x6e1 [ 13.413275] hcd_bus_suspend:2250: usb usb3: bus auto-suspend, wakeup 1 [ 13.419081] hub_resume:3948: hub 7-0:1.0: hub_resume [ 13.419086] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100 [ 13.419095] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 13.419100] hub_suspend:3903: hub 7-0:1.0: hub_suspend [ 13.419106] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1 [ 13.419110] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event [ 13.419112] hcd_bus_resume:2303: usb usb7: usb auto-resume [ 13.420455] handle_port_status:2034: xhci-hcd PNP0D10:04: handle_port_status: starting usb9 port polling. [ 13.420493] handle_port_status:1913: xhci-hcd PNP0D10:05: Port change event, 10-1, id 1, portsc: 0x6e1 [ 13.425332] hcd_bus_suspend:2279: usb usb3: suspend raced with wakeup event [ 13.431931] handle_port_status:2034: xhci-hcd PNP0D10:05: handle_port_status: starting usb10 port polling. [ 13.435080] hub_resume:3948: hub 7-0:1.0: hub_resume [ 13.435084] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100 [ 13.435092] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 13.435096] hub_suspend:3903: hub 7-0:1.0: hub_suspend [ 13.435102] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1 [ 13.435106] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event usb7 and other usb 2.0 root hub were rapidly toggling between suspend and resume states. More, "suspend raced with wakeup event" confuses people. So, limit run_graceperiod for only usb 3.0 devices Signed-off-by: Hongyu Xie Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20251119142417.2820519-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: dbgtty: fix device unregister

2025-12-06T21:25:01Z

commit 1f73b8b56cf35de29a433aee7bfff26cea98be3f upstream. When DbC is disconnected then xhci_dbc_tty_unregister_device() is called. However if there is any user space process blocked on write to DbC terminal device then it will never be signalled and thus stay blocked indifinitely. This fix adds a tty_vhangup() call in xhci_dbc_tty_unregister_device(). The tty_vhangup() wakes up any blocked writers and causes subsequent write attempts to DbC terminal device to fail. Cc: stable Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Łukasz Bartosik Link: https://patch.msgid.link/20251119212910.1245694-1-ukaszb@google.com Signed-off-by: Greg Kroah-Hartman

xhci: dbgtty: Fix data corruption when transmitting data form DbC to host

2025-12-06T21:25:01Z

commit f6bb3b67be9af0cfb90075c60850b6af5338a508 upstream. Data read from a DbC device may be corrupted due to a race between ongoing write and write request completion handler both queuing new transfer blocks (TRBs) if there are remining data in the kfifo. TRBs may be in incorrct order compared to the data in the kfifo. Driver fails to keep lock between reading data from kfifo into a dbc request buffer, and queuing the request to the transfer ring. This allows completed request to re-queue itself in the middle of an ongoing transfer loop, forcing itself between a kfifo read and request TRB write of another request cpu0 cpu1 (re-queue completed req2) lock(port_lock) dbc_start_tx() kfifo_out(fifo, req1->buffer) unlock(port_lock) lock(port_lock) dbc_write_complete(req2) dbc_start_tx() kfifo_out(fifo, req2->buffer) unlock(port_lock) lock(port_lock) req2->trb = ring->enqueue; ring->enqueue++ unlock(port_lock) lock(port_lock) req1->trb = ring->enqueue; ring->enqueue++ unlock(port_lock) In the above scenario a kfifo containing "12345678" would read "1234" to req1 and "5678" to req2, but req2 is queued before req1 leading to data being transmitted as "56781234" Solve this by adding a flag that prevents starting a new tx if we are already mid dbc_start_tx() during the unlocked part. The already running dbc_do_start_tx() will make sure the newly completed request gets re-queued as it is added to the request write_pool while holding the lock. Cc: stable@vger.kernel.org Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20251107162819.1362579-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

xhci: fix stale flag preventig URBs after link state error is cleared

2025-12-06T21:25:01Z

commit b69dfcab6894b1fed5362a364411502a7469fce3 upstream. A usb device caught behind a link in ss.Inactive error state needs to be reset to recover. A VDEV_PORT_ERROR flag is used to track this state, preventing new transfers from being queued until error is cleared. This flag may be left uncleared if link goes to error state between two resets, and print the following message: "xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive" Fix setting and clearing the flag. The flag is cleared after hub driver has successfully reset the device when hcd->reset_device is called. xhci-hcd issues an internal "reset device" command in this callback, and clear all flags once the command completes successfully. This command may complete with a context state error if slot was recently reset and is already in the defauilt state. This is treated as a success but flag was left uncleared. The link state field is also unreliable if port is currently in reset, so don't set the flag in active reset cases. Also clear the flag immediately when link is no longer in ss.Inactive state and port event handler detects a completed reset. This issue was discovered while debugging kernel bugzilla issue 220491. It is likely one small part of the problem, causing some of the failures, but root cause remains unknown Link: https://bugzilla.kernel.org/show_bug.cgi?id=220491 Fixes: b8c3b718087b ("usb: xhci: Don't try to recover an endpoint if port is in error state.") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20251107162819.1362579-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-pci: Fix USB2-only root hub registration

2025-11-13T20:34:32Z

[ Upstream commit 8607edcd1748503f4f58e66ca0216170f260c79b ] A recent change to hide USB3 root hubs of USB2-only controllers broke registration of USB2 root hubs - allow_single_roothub is set too late, and by this time xhci_run() has already deferred root hub registration until after the shared HCD is added, which will never happen. This makes such controllers unusable, but testers didn't notice since they were only bothered by warnings about empty USB3 root hubs. The bug causes problems to other people who actually use such HCs and I was able to confirm it on an ordinary HC by patching to ignore USB3 ports. Setting allow_single_roothub during early setup fixes things. Reported-by: Arisa Snowbell Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/ Reported-by: Michal Kubecek Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/ Fixes: 719de070f764 ("usb: xhci-pci: add support for hosts with zero USB3 ports") Tested-by: Arisa Snowbell Tested-by: Michal Kubecek Suggested-by: Mathias Nyman Signed-off-by: Michal Pecio Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: xhci-pci: add support for hosts with zero USB3 ports

2025-11-13T20:34:26Z

[ Upstream commit 719de070f764e079cdcb4ddeeb5b19b3ddddf9c1 ] Add xhci support for PCI hosts that have zero USB3 ports. Avoid creating a shared Host Controller Driver (HCD) when there is only one root hub. Additionally, all references to 'xhci->shared_hcd' are now checked before use. Only xhci-pci.c requires modification to accommodate this change, as the xhci core already supports configurations with zero USB3 ports. This capability was introduced when xHCI Platform and MediaTek added support for zero USB3 ports. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220181 Tested-by: Nick Nielsen Tested-by: grm1 Signed-off-by: Niklas Neronin Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250917210726.97100-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: xhci: plat: Facilitate using autosuspend for xhci plat devices

2025-11-13T20:34:26Z

[ Upstream commit 41cf11946b9076383a2222bbf1ef57d64d033f66 ] Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs, when in host mode, it is intended that the controller goes to suspend state to save power and wait for interrupts from connected peripheral to wake it up. This is particularly used in cases where a HID or Audio device is connected. In such scenarios, the usb controller can enter auto suspend and resume action after getting interrupts from the connected device. Signed-off-by: Krishna Kurapati Link: https://lore.kernel.org/r/20250916120436.3617598-1-krishna.kurapati@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin