kernel.git/drivers/usb/host/Kconfig, branch linux-2.6.30.y

USB: Add platform device support for the ISP1760 USB chip

2009-03-24T23:20:31Z

Currently, the driver only supports PCI and PPC_OF but there are boards like ARM RealView where this is a platform device. The patch adds the necessary functions and registration to the isp1760-if.c file and modifies the corresponding Makefile and Kconfig to be able to use this driver even if PCI and PPC_OF are not enabled. Signed-off-by: Catalin Marinas Cc: Sebastian Siewior Cc: Russell King Signed-off-by: Greg Kroah-Hartman

usb: kill prehistorical comments about USB_EHCI_HCD

2009-03-24T23:20:31Z

Remove old comments about USB_EHCI_HCD. Cc: Alan Stern Signed-off-by: Andrew Morton Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman

USB: Driver for Freescale QUICC Engine USB Host Controller

2009-01-28T00:15:38Z

This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman

USB: omap1 ohci buildfix (otg related)

2009-01-28T00:15:32Z

> > drivers/built-in.o: In function `ohci_omap_init': > > hid-quirks.c:(.text+0x6c608): undefined reference to `otg_get_transceiver' > > drivers/built-in.o: In function `omap_udc_probe': > > hid-quirks.c:(.init.text+0x34c0): undefined reference to `otg_get_transceiver' > > hid-quirks.c:(.init.text+0x3d40): undefined reference to `otg_put_transceiver' Reported-by: Russell King Signed-off-by: David Brownell Acked-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

usb host: Oxford OXU210HP HCD driver.

2009-01-07T17:59:50Z

This driver implements the support for Oxford OXU210HP USB high-speed host, no peripheral nor OTG. Signed-off-by: Rodolfo Giometti Cc: Kan Liu Signed-off-by: Greg Kroah-Hartman

USB: remove optional bus bindings in isp1760, fixing runtime warning

2008-11-13T22:45:03Z

Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [] kmem_cache_create+0xc9/0x3a3 | [] free_pages_bulk+0x16c/0x1c9 | [] isp1760_init+0x0/0xb [isp1760] | [] init_kmem_once+0x18/0x5f [isp1760] | [] isp1760_init+0x5/0xb [isp1760] | [] _stext+0x4d/0x148 | [] load_module+0x12cd/0x142e | [] kmem_cache_destroy+0x0/0xd7 | [] sys_init_module+0x87/0x176 | [] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing Signed-off-by: Sebastian Andrzej Siewior a Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2008-10-23T17:09:50Z

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: don't rebind drivers after failed resume or reset USB: fix memory leak in cdc-acm USB: Unusual dev for Mio moov 330 gps USB: cdc-wdm: make module autoload work USB: Fix unneeded endpoint check in pxa27x_udc usb/gadget: fix kernel-doc warning USB: Speedtouch: add pre_reset and post_reset routines USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative USB: support Huawei data card product IDs USB: add ZTE MF626 USB GSM modem entry USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc USB: ohci: add support for tmio-ohci cell

USB: ohci: add support for tmio-ohci cell

2008-10-22T17:05:27Z

Some Toshiba Mobile I/O chips have OHCI controller built in. E.g. the tc6393xb chip found in several Toshiba e-Series PDAs and in Sharp Zaurus SL-6000 PDA. This adds platform glue to support OHCI function of the chip. Signed-off-by: Dmitry Baryshkov Acked-by: Ian Molton Cc: Ian Molton Signed-off-by: Greg Kroah-Hartman

uwb: depend on EXPERIMENTAL

2008-09-17T15:54:36Z

The UWB stack has some sysfs APIs that will change thus it's best marked as EXPERIMENTAL until these APIs are finalized. Signed-off-by: David Vrabel

wusb: add HWA host controller driver

2008-09-17T15:54:31Z

Add a driver for Wireless USB host controllers connected via USB (a Host Wire Adapter or HWA). Signed-off-by: David Vrabel