kernel.git/drivers/usb/gadget/function, branch linux-5.3.y

usb: gadget: u_serial: add missing port entry locking

2019-12-13T07:48:19Z

commit daf82bd24e308c5a83758047aff1bd81edda4f11 upstream. gserial_alloc_line() misses locking (for a release barrier) while resetting port entry on TTY allocation failure. Fix this. Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław Reviewed-by: Greg Kroah-Hartman Tested-by: Ladislav Michl Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt

2019-08-12T05:55:24Z

If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable(): fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it. ---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <--- Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc... But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong. Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case. This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly. That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Stern Signed-off-by: Felipe Balbi

Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-07-11T22:40:06Z

Pull USB / PHY updates from Greg KH: "Here is the big USB and PHY driver pull request for 5.3-rc1. Lots of stuff here, all of which has been in linux-next for a while with no reported issues. Nothing is earth-shattering, just constant forward progress for more devices supported and cleanups and small fixes: - USB gadget driver updates and fixes - new USB gadget driver for some hardware, followed by a quick revert of those patches as they were not ready to be merged... - PHY driver updates - Lots of new driver additions and cleanups with a few fixes mixed in" * tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits) Revert "usb: gadget: storage: Remove warning message" Revert "dt-bindings: add binding for USBSS-DRD controller." Revert "usb:gadget Separated decoding functions from dwc3 driver." Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function." Revert "usb:gadget Simplify usb_decode_get_set_descriptor function." Revert "usb:cdns3 Add Cadence USB3 DRD Driver" Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer." usb :fsl: Change string format for errata property usb: host: Stops USB controller init if PLL fails to lock usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 usb: phy: Workaround for USB erratum-A005728 usb: fsl: Set USB_EN bit to select ULPI phy usb: Handle USB3 remote wakeup for LPM enabled devices correctly drivers/usb/typec/tps6598x.c: fix 4CC cmd write drivers/usb/typec/tps6598x.c: fix portinfo width usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" ...

Revert "usb: gadget: storage: Remove warning message"

2019-07-04T11:05:59Z

This reverts commit e70b3f5da00119e057b7faa557753fee7f786f17. EJ writes: Thinh found this patch might cause a failure in USB CV TD 9.13 Set Configuration Test. We are trying to fix it. Could you please defer the merging of this patch until we fix it? So am now dropping it. Reported-by: EJ Hsu Cc: Alan Stern Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v5.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-07-03T11:48:54Z

Felipe writes: USB: more changes for v5.3 merge window Turns out a few more important changes came about. We have the new Cadence DRD Driver being added here and that's the biggest, most important part. Together with that we have suport for new imx7ulp phy. Support for TigerLake Devices on dwc3. Also a couple important fixes which weren't completed in time for the -rc cycle. Signed-off-by: Felipe Balbi * tag 'usb-for-v5.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" usb: phy: phy-mxs-usb: add imx7ulp support doc: dt-binding: mxs-usb-phy: add compatible for 7ulp usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb:cdns3 Add Cadence USB3 DRD Driver usb:gadget Simplify usb_decode_get_set_descriptor function. usb:gadget Patch simplify usb_decode_set_clear_feature function. usb:gadget Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: dwc3: pci: add support for TigerLake Devices

USB: gadget: function: fix issue Unneeded variable: "value"

2019-07-03T07:58:44Z

fix below issue reported by coccicheck drivers/usb/gadget/function/f_eem.c:169:7-12: Unneeded variable: "value". Return "- EOPNOTSUPP" on line 179 We can not change return type of eem_setup as its registered with callback function Signed-off-by: Hariprasad Kelam Signed-off-by: Felipe Balbi

Merge tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-07-01T10:01:33Z

Felipe writes: usb: changes for v5.3 merge window The biggest part here is a set of patches removing unnecesary variables from several drivers. Meson-g12a's dwc3 glue implemented IRQ-based OTG/DRD role swap. Qcom's dwc3 glue added support for ACPI, mainly for the AArch64-based SoCs. DWC3 also got support for Intel Elkhart Lake platforms. * tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (30 commits) usb: dwc3: remove unused @lock member of dwc3_ep struct usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices usb: Replace snprintf with scnprintf in gether_get_ifname usb: gadget: ether: Fix race between gether_disconnect and rx_submit usb: gadget: storage: Remove warning message usb: dwc3: gadget: Add support for disabling U1 and U2 entries usb: gadget: send usb_gadget as an argument in get_config_params doc: dt: bindings: usb: dwc3: Update entries for disabling U1 and U2 usb: dwc3: qcom: Use of_clk_get_parent_count() usb: dwc3: Fix core validation in probe, move after clocks are enabled usb: dwc3: qcom: Improve error handling usb: dwc3: qcom: Start USB in 'host mode' on the SDM845 usb: dwc3: qcom: Add support for booting with ACPI soc: qcom: geni: Add support for ACPI Revert "usb: dwc2: host: Setting qtd to NULL after freeing it" usb: gadget: net2272: remove redundant assignments to pointer 's' usb: gadget: Zero ffs_io_data USB: omap_udc: Remove unneeded variable fotg210-udc: Remove unneeded variable usb: gadget: at91_udc: Remove unneeded variable ...

docs: usb: rename files to .rst and add them to drivers-api

2019-06-20T12:28:36Z

While there are a mix of things here, most of the stuff were written from Kernel developer's PoV. So, add them to the driver-api book. A follow up for this patch would be to move documents from there that are specific to sysadmins, adding them to the admin-guide. Signed-off-by: Mauro Carvalho Chehab Acked-by: Johan Hovold Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: Replace snprintf with scnprintf in gether_get_ifname

2019-06-20T05:53:11Z

snprintf returns the actual length of the buffer created; however, this is not the case if snprintf truncates its parameter. See https://lwn.net/Articles/69419/ for a detailed explanation. The current code correctly handles this case at the expense of extra code in the return statement. scnprintf does returns the actual length of the buffer created making the ?: operator unnecessary in the return statement. This change does not alter the functionality of the code. Signed-off-by: Daniel M German Signed-off-by: Felipe Balbi

usb: gadget: ether: Fix race between gether_disconnect and rx_submit

2019-06-18T08:58:30Z

On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash. Fixed by releasing the lock in rx_submit after port_usb is used. Fixes: 2b3d942c4878 ("usb ethernet gadget: split out network core") Cc: Signed-off-by: Kiruthika Varadarajan Signed-off-by: Felipe Balbi