kernel.git/drivers/usb/gadget/function/f_tcm.c, branch linux-5.18.y

scsi: target: usb: Replace enable attr with ops.enable

2021-10-05T03:27:39Z

Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-8-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov Reviewed-by: Mike Christie Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen

usb: fix various gadgets null ptr deref on 10gbps cabling.

2021-06-09T08:37:13Z

This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps. Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus") Cc: Christophe JAILLET Cc: Felipe Balbi Cc: Gustavo A. R. Silva Cc: Lorenzo Colitti Cc: Martin K. Petersen Cc: Michael R Sweet Cc: Mike Christie Cc: Pawel Laszczak Cc: Peter Chen Cc: Sudhakar Panneerselvam Cc: Wei Ming Chen Cc: Will McVicker Cc: Zqiang Reviewed-By: Lorenzo Colitti Cc: stable Signed-off-by: Maciej Żenczykowski Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman

scsi: target: usb: gadget: Convert to new submission API

2021-03-04T22:37:01Z

target_submit_cmd() is now only for simple drivers that do their own sync during shutdown and do not use target_stop_session(). It will never return a failure, so we can remove that code from the driver. Note: Before these patches target_submit_cmd() would never return an error for usb since it does not use target_stop_session(). If it did then we would have hit a refcount error here: transport_send_check_condition_and_sense(se_cmd, TCM_UNSUPPORTED_SCSI_OPCODE, 1); transport_generic_free_cmd(&cmd->se_cmd, 0); transport_send_check_condition_and_sense() calls queue_status and the driver can sometimes do transport_generic_free_cmd() from there via uasp_status_data_cmpl(). In that case, the above transport_generic_free_cmd() would then hit a refcount error. So that other use of the above error path in the driver is also probably wrong, but someone with the hardware needs to fix that. Link: https://lore.kernel.org/r/20210227170006.5077-11-michael.christie@oracle.com Cc: Felipe Balbi Reviewed-by: Christoph Hellwig Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen

scsi: target: core: Rename transport_init_se_cmd()

2021-03-04T22:37:00Z

Rename transport_init_se_cmd() to __target_init_cmd() to reflect that it is more of an internal function that drivers should normally not use and because we are going to add a new init function in the next patches. Link: https://lore.kernel.org/r/20210227170006.5077-4-michael.christie@oracle.com Reviewed-by: Christoph Hellwig Reviewed-by: Himanshu Madhani Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen

usb: gadget: config_ep_by_speed_and_alt instead of config_ep_by_speed

2020-10-02T06:57:40Z

This patch replace config_ep_by_speed with config_ep_by_speed_and_alt. This change allows to select proper usb_ss_ep_comp_descriptor for each stream capable endpoints. f_tcm function for SS use array of headers for both BOT/UAS alternate setting: static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, }; The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS. During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object. Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to bot_uasp_ss_bi_desc. And in result it uses the descriptor from BOT alternate setting instead UAS. Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot. Signed-off-by: Jayshri Pawar Signed-off-by: Pawel Laszczak Reviewed-by: Peter Chen Signed-off-by: Felipe Balbi

usb: gadget: f_tcm: Fix some resource leaks in some error paths

2020-08-17T10:35:22Z

If a memory allocation fails within a 'usb_ep_alloc_request()' call, the already allocated memory must be released. Fix a mix-up in the code and free the correct requests. Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT") Signed-off-by: Christophe JAILLET Signed-off-by: Felipe Balbi

usb: gadget: Use fallthrough pseudo-keyword

2020-07-10T06:55:18Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20200707171500.GA13620@embeddedor Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-06-13T20:17:49Z

Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...

scsi: target: Initialize LUN in transport_init_se_cmd()

2020-06-10T01:57:26Z

Initialization of orig_fe_lun is moved to transport_init_se_cmd() from transport_lookup_cmd_lun(). This helps for the cases where the SCSI request fails before the call to transport_lookup_cmd_lun() so that trace_target_cmd_complete() can print the LUN information to the trace buffer. Due to this change, the lun parameter is removed from transport_lookup_cmd_lun() and transport_lookup_tmr_lun(). Link: https://lore.kernel.org/r/1591559913-8388-3-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie Signed-off-by: Sudhakar Panneerselvam Signed-off-by: Martin K. Petersen

usb: gadget: f_tcm: Inform last stream request

2020-05-25T08:09:41Z

Set the request->is_last to each stream request to indicate that the request is the last stream request of a transfer. The DWC3 controller needs to know this info to properly switch streams. The current implementation of f_tcm uses a single request per transfer, so every stream request is the last of its stream. Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi