kernel.git/drivers/usb/gadget/epautoconf.c, branch linux-3.3.y

usb: gadget: check for streams only for SS udcs

2012-01-24T13:43:12Z

Currently the UASP gadget fails to bind on an UDC which does not provide stream support. This is true for all udc in tree except for dummy and dwc3 since they don't support SuperSpeed. There is no need to test for the availability of stream support on those UDCs because we will never even try to use them. I think it is sane to assume that StreamSupport is always available on SuperSpeed since it is one of the key features. The host side will only allocate on SS so this part is also fine. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi

Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2012-01-09T20:09:47Z

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...

usb: gadget: epautoconf: do not change number of streams

2011-12-19T11:45:01Z

We should not change gadget driver's descriptors just because we think it's right to do so. There are several of reasons which would support this statement but it suffices to say that this was probably never tested because it updates bmAttributes without asking the driver if it's ok to do so. This means that e.g. on UASP gadget it would enable stream support even for the command endpoint which must not have stream support enabled. In fact, this change is fixing the bug introduced by commit a59d6b9 (usb: gadget: add streams support to the gadget framework) which was caught when testing UASP gadget with dwc3 driver. Cc: Tatyana Brokhman Signed-off-by: Felipe Balbi

usb: gadget: replace usb_gadget::is_dualspeed with max_speed

2011-12-12T09:45:11Z

This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: Michal Nazarewicz Signed-off-by: Felipe Balbi

usb gadget: clean up FSF boilerplate text

2011-09-09T23:00:09Z

remove the following two paragraphs as they are not needed: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc.,59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. Signed-off-by: Klaus Schwarzkopf Signed-off-by: Greg Kroah-Hartman

USB: use usb_endpoint_maxp() instead of le16_to_cpu()

2011-08-23T16:47:40Z

Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst Cc: Pavel Machek Cc: Johannes Erdfelt Cc: Vojtech Pavlik Cc: Oliver Neukum Cc: David Kubicek Cc: Johan Hovold Cc: Brad Hards Acked-by: Felipe Balbi Cc: Sebastian Andrzej Siewior Cc: Thomas Dahlmann Cc: David Brownell Cc: David Lopo Cc: Alan Stern Cc: Michal Nazarewicz Cc: Xie Xiaobo Cc: Li Yang Cc: Jiang Bo Cc: Yuan-hsin Chen Cc: Darius Augulis Cc: Xiaochen Shen Cc: Yoshihiro Shimoda Cc: OKI SEMICONDUCTOR, Cc: Robert Jarzmik Cc: Ben Dooks Cc: Thomas Abraham Cc: Herbert Pötzl Cc: Arnaud Patard Cc: Roman Weissgaerber Acked-by: Sarah Sharp Cc: Tony Olech Cc: Florian Floe Echtler Cc: Christian Lucht Cc: Juergen Stuber Cc: Georges Toth Cc: Bill Ryder Cc: Kuba Ober Cc: Inaky Perez-Gonzalez Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman

usb: gadget: add SuperSpeed support to the Gadget Framework

2011-07-01T21:27:05Z

SuperSpeed USB has defined a new descriptor, called the Binary Device Object Store (BOS) Descriptor. It has also changed a bit the definition of SET_FEATURE and GET_STATUS requests to add USB3-specific details. This patch implements both changes to the Composite Gadget Framework. [ balbi@ti.com : slight changes to commit log fixed a compile error on ARM ] Signed-off-by: Tatyana Brokhman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: add streams support to the gadget framework

2011-06-28T18:20:15Z

This patch defines necessary fields to support streaming for USB3.0. It implements a new function, called usb_ep_autoconfig_ss(), to be used instead of the existing usb_ep_autoconfig() when working in SuperSpeed mode and there is a need to search for an endpoint according to the number of required streams. [ balbi@ti.com : slight changes to commit log ] Signed-off-by: Maya Erez Signed-off-by: Tatyana Brokhman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: configure endpoint according to gadget speed

2011-06-28T18:14:36Z

Add config_ep_by_speed() to configure the endpoint according to the gadget speed. Using this function will spare the FDs from handling the endpoint chosen descriptor. Signed-off-by: Tatyana Brokhman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: Gadget: Initialize wMaxPacketSize if not already set

2011-02-04T19:42:52Z

Currently, for ISO and INT, a protocol driver must chose the value for wMaxPacketSize arbitrarily. The value may be too low, resulting in lesser than efficient operation or high enough to not work with all UDC drivers. Take un-initialized wMaxPacketSize as a hint to provide maximum possible packetsize for the selected endpoint. The protocol may then choose a value not bigger than that. Signed-off-by: Jassi Brar Signed-off-by: Greg Kroah-Hartman