kernel.git/drivers/usb/dwc3, branch linux-5.4.y

usb: dwc3: Ignore late xferNotReady event to prevent halt timeout

2025-08-28T14:21:32Z

commit 58577118cc7cec9eb7c1836bf88f865ff2c5e3a3 upstream. During a device-initiated disconnect, the End Transfer command resets the event filter, allowing a new xferNotReady event to be generated before the controller is fully halted. Processing this late event incorrectly triggers a Start Transfer, which prevents the controller from halting and results in a DSTS.DEVCTLHLT bit polling timeout. Ignore the late xferNotReady event if the controller is already in a disconnected state. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable Signed-off-by: Kuen-Han Tsai Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250807090700.2397190-1-khtsai@google.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: meson-g12a: fix device leaks at unbind

2025-08-28T14:21:30Z

commit 93b400f4951404d040197943a25d6fef9f8ccabb upstream. Make sure to drop the references taken to the child devices by of_find_device_by_node() during probe on driver unbind. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Cc: stable@vger.kernel.org # 5.2 Cc: Neil Armstrong Signed-off-by: Johan Hovold Reviewed-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20250724091910.21092-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: qcom: Don't leave BCR asserted

2025-08-28T14:21:16Z

commit ef8abc0ba49ce717e6bc4124e88e59982671f3b5 upstream. Leaving the USB BCR asserted prevents the associated GDSC to turn on. This blocks any subsequent attempts of probing the device, e.g. after a probe deferral, with the following showing in the log: [ 1.332226] usb30_prim_gdsc status stuck at 'off' Leave the BCR deasserted when exiting the driver to avoid this issue. Cc: stable Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Acked-by: Thinh Nguyen Reviewed-by: Konrad Dybcio Signed-off-by: Krishna Kurapati Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com [ adapted to individual clock management API instead of bulk clock operations ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: check that event count does not exceed event buffer length

2025-05-02T05:39:27Z

commit 63ccd26cd1f6600421795f6ca3e625076be06c9f upstream. The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34 Signed-off-by: Frode Isaksen Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250403072907.448524-1-fisaksen@baylibre.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: support continuous runtime PM with dual role

2025-05-02T05:39:22Z

commit c2cd3452d5f8b66d49a73138fba5baadd5b489bd upstream. The DRD module calls dwc3_set_mode() on role switches, i.e. when a device is being plugged in. In order to support continuous runtime power management when plugging in / unplugging a cable, we need to call pm_runtime_get_sync() in this path. Signed-off-by: Martin Kepplinger Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Fix timeout issue during controller enter/exit from halt state

2025-03-13T11:43:21Z

[ Upstream commit d3a8c28426fc1fb3252753a9f1db0d691ffc21b0 ] There is a frequent timeout during controller enter/exit from halt state after toggling the run_stop bit by SW. This timeout occurs when performing frequent role switches between host and device, causing device enumeration issues due to the timeout. This issue was not present when USB2 suspend PHY was disabled by passing the SNPS quirks (snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS. However, there is a requirement to enable USB2 suspend PHY by setting of GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts in gadget or host mode results in the timeout issue. This commit addresses this timeout issue by ensuring that the bits GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting the dwc3_gadget_run_stop sequence and restoring them after the dwc3_gadget_run_stop sequence is completed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable Signed-off-by: Selvarasu Ganesan Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: dwc3: Increase DWC3 controller halt timeout

2025-03-13T11:43:21Z

[ Upstream commit 461ee467507cb98a348fa91ff8460908bb0ea423 ] Since EP0 transactions need to be completed before the controller halt sequence is finished, this may take some time depending on the host and the enabled functions. Increase the controller halt timeout, so that we give the controller sufficient time to handle EP0 transfers. Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20220901193625.8727-4-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: d3a8c28426fc ("usb: dwc3: Fix timeout issue during controller enter/exit from halt state") Signed-off-by: Sasha Levin

usb: dwc3: gadget: Fix checking for number of TRBs left

2024-12-14T18:44:39Z

commit 02a6982b0ccfcdc39e20016f5fc9a1b7826a6ee7 upstream. The check whether the TRB ring is full or empty in dwc3_calc_trbs_left() is insufficient. It assumes there are active TRBs if there's any request in the started_list. However, that's not the case for requests with a large SG list. That is, if we have a single usb request that requires more TRBs than the total TRBs in the TRB ring, the queued TRBs will be available when all the TRBs in the ring are completed. But the request is only partially completed and remains in the started_list. With the current logic, the TRB ring is empty, but dwc3_calc_trbs_left() returns 0. Fix this by additionally checking for the request->num_trbs for active TRB count. Cc: stable@vger.kernel.org Fixes: 51f1954ad853 ("usb: dwc3: gadget: Fix dwc3_calc_trbs_left()") Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/708dc62b56b77da1f704cc2ae9b6ddb1f2dbef1f.1731545781.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: Stop processing of pending events if controller is halted

2024-11-08T15:20:46Z

commit 0d410e8913f5cffebcca79ffdd596009d4a13a28 upstream. This commit addresses an issue where events were being processed when the controller was in a halted state. To fix this issue by stop processing the events as the event count was considered stale or invalid when the controller was halted. Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: stable@kernel.org Signed-off-by: Selvarasu Ganesan Suggested-by: Thinh Nguyen Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: st: add missing depopulate in probe error path

2024-09-04T11:15:04Z

commit cd4897bfd14f6a5388b21ba45a066541a0425199 upstream. Depopulate device in probe error paths to fix leak of children resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Reviewed-by: Patrice Chotard Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman