<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel.git/drivers/usb/dwc3/platform_data.h, branch linux-4.0.y</title>
<subtitle>Hosts the 0x221E linux distro kernel.
</subtitle>
<id>https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.0.y</id>
<link rel='self' href='https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.0.y'/>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/'/>
<updated>2014-11-03T16:03:41Z</updated>
<entry>
<title>usb: dwc3: make HIRD threshold configurable</title>
<updated>2014-11-03T16:03:41Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-31T03:11:18Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=460d098cb6728134e0e4ba3d58e10bb43032daa5'/>
<id>urn:sha1:460d098cb6728134e0e4ba3d58e10bb43032daa5</id>
<content type='text'>
HIRD threshold should be configurable by different platforms.

From DesignWare databook:
When HIRD_Threshold[4] is set to 1b1 and HIRD value is greater than or
equal to the value in HIRD_Threshold[3:0], dwc3 asserts output signals
utmi_l1_suspend_n to put PHY into Deep Low-Power mode in L1.

When HIRD_Threshold[4] is set to 1b0 or the HIRD value is less than
HIRD_Threshold[3:0], dwc3 asserts output signals utmi_sleep_n on L1.

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add disable usb2 suspend phy quirk</title>
<updated>2014-11-03T16:03:39Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-31T03:11:14Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=0effe0a3e741c0e2318f541ce207c9bd6cfe985c'/>
<id>urn:sha1:0effe0a3e741c0e2318f541ce207c9bd6cfe985c</id>
<content type='text'>
This patch adds disable usb2 suspend phy quirk, and some special platforms
can configure that if it is needed.

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add disable usb3 suspend phy quirk</title>
<updated>2014-11-03T16:03:39Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-31T03:11:13Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=59acfa208164205f94a11f454d08cd88f06b9908'/>
<id>urn:sha1:59acfa208164205f94a11f454d08cd88f06b9908</id>
<content type='text'>
This patch adds disable usb3 suspend phy quirk, and some special platforms
can configure that if it is needed.

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add Tx de-emphasis quirk</title>
<updated>2014-11-03T16:03:39Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-31T03:11:12Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=6b6a0c9a3ffa3107994d92d5758cbe274c5a97b6'/>
<id>urn:sha1:6b6a0c9a3ffa3107994d92d5758cbe274c5a97b6</id>
<content type='text'>
This patch adds Tx de-emphasis quirk, and the Tx de-emphasis value is
configurable according to PIPE3 specification.

Value		Description
0		-6dB de-emphasis
1		-3.5dB de-emphasis
2		No de-emphasis
3		Reserved

It can be configured on DT or platform data.

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add rx_detect to polling lfps quirk</title>
<updated>2014-11-03T16:03:38Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-28T11:54:33Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=14f4ac53dfb2321b07a0e690df797fba61102fa6'/>
<id>urn:sha1:14f4ac53dfb2321b07a0e690df797fba61102fa6</id>
<content type='text'>
This patch adds RX_DETECT to Polling.LFPS control quirk, and some special
platforms can configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add lfps filter quirk</title>
<updated>2014-11-03T16:03:38Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-28T11:54:32Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=fb67afca177a215684d6124137f61e639c5483d4'/>
<id>urn:sha1:fb67afca177a215684d6124137f61e639c5483d4</id>
<content type='text'>
This patch adds LFPS filter quirk, and some special platforms can configure
that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add delay phy power change quirk</title>
<updated>2014-11-03T16:03:37Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-28T11:54:31Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=41c06ffdf9cc63edd875cc8ff8ae002cd9b14f96'/>
<id>urn:sha1:41c06ffdf9cc63edd875cc8ff8ae002cd9b14f96</id>
<content type='text'>
This patch adds delay PHY power change from P0 to P1/P2/P3 when link state
changing from U0 to U1/U2/U3 respectively, and some special platforms can
configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add delay p1p2p3 quirk</title>
<updated>2014-11-03T16:03:37Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-28T11:54:30Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=a2a1d0f5838d6aa0d1306ef9bb1011f501faa695'/>
<id>urn:sha1:a2a1d0f5838d6aa0d1306ef9bb1011f501faa695</id>
<content type='text'>
This patch adds delay P0 to P1/P2/P3 quirk for U2/U2/U3, and some special
platforms can configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add request p1p2p3 quirk</title>
<updated>2014-11-03T16:03:37Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-28T11:54:29Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=df31f5b3a6d3ef0bb692edff13167e9a1c5aa25e'/>
<id>urn:sha1:df31f5b3a6d3ef0bb692edff13167e9a1c5aa25e</id>
<content type='text'>
This patch adds request P1/P2/P3 quirk for U2/U2/U3, and some special
platforms can configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
<entry>
<title>usb: dwc3: add P3 in U2 SS inactive quirk</title>
<updated>2014-11-03T16:03:36Z</updated>
<author>
<name>Huang Rui</name>
</author>
<published>2014-10-28T11:54:28Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=b5a65c406367e3e79ece6f687c83d4ffce4c174c'/>
<id>urn:sha1:b5a65c406367e3e79ece6f687c83d4ffce4c174c</id>
<content type='text'>
This patch adds P3 in U2 SS inactive quirk, and some special platforms can
configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui &lt;ray.huang@amd.com&gt;
Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
</content>
</entry>
</feed>
