kernel.git/drivers/usb/dwc3/core.h, branch linux-4.3.y

usb: dwc3: Add dis_enblslpm_quirk

2015-12-09T19:34:37Z

commit ec791d149bca4511e7d3a6a92bb3b030c5a443f9 upstream. Add a quirk to clear the GUSB2PHYCFG.ENBLSLPM bit, which controls whether the PHY receives the suspend signal from the controller. Signed-off-by: John Youn Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Support Synopsys USB 3.1 IP

2015-12-09T19:34:36Z

commit 690fb3718a70c66004342f6f5e2e8a5f95b977db upstream. This patch allows the dwc3 driver to run on the new Synopsys USB 3.1 IP core, albeit in USB 3.0 mode only. The Synopsys USB 3.1 IP (DWC_usb31) retains mostly the same register interface and programming model as the existing USB 3.0 controller IP (DWC_usb3). However the GSNPSID and version numbers are different. Add checking for the new ID to pass driver probe. Also, since the DWC_usb31 version number is lower in value than the full GSNPSID of the DWC_usb3 IP, we set the high bit to identify DWC_usb31 and to ensure the values are higher. Finally, add a documentation note about the revision numbering scheme. Any future revision checks (for STARS, workarounds, and new features) should take into consideration how it applies to both the 3.1/3.0 IP. Signed-off-by: John Youn Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

Merge 4.1-rc7 into usb-next

2015-06-08T17:57:51Z

This resolves a merge issue in musb_core.c and we want the fixes that were in Linus's tree in this branch as well for testing. Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros

2015-05-26T14:44:55Z

Fixed the incorrect macro definitions correctly as per databook. Signed-off-by: Subbaraya Sundeep Bhatta Fixes: b09bb64239c8 (usb: dwc3: gadget: implement Global Command support) Cc: #v3.5+ Signed-off-by: Felipe Balbi

usb: dwc3: add ULPI interface support

2015-05-13T17:06:52Z

Registers DWC3's ULPI interface with the ULPI bus when it's available. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi

usb: dwc3: add hsphy_interface property

2015-05-13T17:06:42Z

Platforms that have configured DWC_USB3_HSPHY_INTERFACE with value 3, i.e. UTMI+ and ULPI, need to inform the driver of the actual HSPHY interface type with the property. "utmi" if the interface is UTMI+ or "ulpi" if the interface is ULPI. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi

usb: dwc3: ULPI or UTMI+ select

2015-05-13T17:05:41Z

Make selection between ULPI and UTMI+ interfaces possible by providing definition for the bit in Global USB2 PHY Configuration Register that controls it. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi

usb: dwc3: USB2 PHY register access bits

2015-05-13T17:05:33Z

Definitions for Global USB2 PHY Vendor Control Register bits. We will need them to access ULPI PHY registers later. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi

usb: dwc3: make LPM configurable in DT

2015-03-10T20:33:33Z

This patch removes "Enable USB3 LPM Capability" option from Kconfig and adds snps,usb3_lpm_capable devicetree property instead of it. USB3 LPM (Link Power Management) capability is hardware property, and it's platform dependent, so if our hardware supports this feature, we want rather to configure it in devicetree than having it as Kconfig option. Signed-off-by: Robert Baldyga Signed-off-by: Felipe Balbi

usb: dwc3: gadget: use common is_selfpowered

2015-01-29T16:35:40Z

Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi