kernel.git/drivers/usb/dwc3/core.c, branch linux-5.9.y

usb: dwc3: core: don't trigger runtime pm when remove driver

2020-11-05T10:51:38Z

commit 266d0493900ac5d6a21cdbe6b1624ed2da94d47a upstream. No need to trigger runtime pm in driver removal, otherwise if user disable auto suspend via sys file, runtime suspend may be entered, which will call dwc3_core_exit() again and there will be clock disable not balance warning: [ 2026.820154] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 2026.825268] usb usb2: USB disconnect, device number 1 [ 2026.831017] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 2026.836806] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 2026.842029] usb usb1: USB disconnect, device number 1 [ 2026.848029] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 2026.865889] ------------[ cut here ]------------ [ 2026.870506] usb2_ctrl_root_clk already disabled [ 2026.875082] WARNING: CPU: 0 PID: 731 at drivers/clk/clk.c:958 clk_core_disable+0xa0/0xa8 [ 2026.883170] Modules linked in: dwc3(-) phy_fsl_imx8mq_usb [last unloaded: dwc3] [ 2026.890488] CPU: 0 PID: 731 Comm: rmmod Not tainted 5.8.0-rc7-00280-g9d08cca-dirty #245 [ 2026.898489] Hardware name: NXP i.MX8MQ EVK (DT) [ 2026.903020] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) [ 2026.908594] pc : clk_core_disable+0xa0/0xa8 [ 2026.912777] lr : clk_core_disable+0xa0/0xa8 [ 2026.916958] sp : ffff8000121b39a0 [ 2026.920271] x29: ffff8000121b39a0 x28: ffff0000b11f3700 [ 2026.925583] x27: 0000000000000000 x26: ffff0000b539c700 [ 2026.930895] x25: 000001d7e44e1232 x24: ffff0000b76fa800 [ 2026.936208] x23: ffff0000b76fa6f8 x22: ffff800008d01040 [ 2026.941520] x21: ffff0000b539ce00 x20: ffff0000b7105000 [ 2026.946832] x19: ffff0000b7105000 x18: 0000000000000010 [ 2026.952144] x17: 0000000000000001 x16: 0000000000000000 [ 2026.957456] x15: ffff0000b11f3b70 x14: ffffffffffffffff [ 2026.962768] x13: ffff8000921b36f7 x12: ffff8000121b36ff [ 2026.968080] x11: ffff8000119e1000 x10: ffff800011bf26d0 [ 2026.973392] x9 : 0000000000000000 x8 : ffff800011bf3000 [ 2026.978704] x7 : ffff800010695d68 x6 : 0000000000000252 [ 2026.984016] x5 : ffff0000bb9881f0 x4 : 0000000000000000 [ 2026.989327] x3 : 0000000000000027 x2 : 0000000000000023 [ 2026.994639] x1 : ac2fa471aa7cab00 x0 : 0000000000000000 [ 2026.999951] Call trace: [ 2027.002401] clk_core_disable+0xa0/0xa8 [ 2027.006238] clk_core_disable_lock+0x20/0x38 [ 2027.010508] clk_disable+0x1c/0x28 [ 2027.013911] clk_bulk_disable+0x34/0x50 [ 2027.017758] dwc3_core_exit+0xec/0x110 [dwc3] [ 2027.022122] dwc3_suspend_common+0x84/0x188 [dwc3] [ 2027.026919] dwc3_runtime_suspend+0x74/0x9c [dwc3] [ 2027.031712] pm_generic_runtime_suspend+0x28/0x40 [ 2027.036419] genpd_runtime_suspend+0xa0/0x258 [ 2027.040777] __rpm_callback+0x88/0x140 [ 2027.044526] rpm_callback+0x20/0x80 [ 2027.048015] rpm_suspend+0xd0/0x418 [ 2027.051503] __pm_runtime_suspend+0x58/0xa0 [ 2027.055693] dwc3_runtime_idle+0x7c/0x90 [dwc3] [ 2027.060224] __rpm_callback+0x88/0x140 [ 2027.063973] rpm_idle+0x78/0x150 [ 2027.067201] __pm_runtime_idle+0x58/0xa0 [ 2027.071130] dwc3_remove+0x64/0xc0 [dwc3] [ 2027.075140] platform_drv_remove+0x28/0x48 [ 2027.079239] device_release_driver_internal+0xf4/0x1c0 [ 2027.084377] driver_detach+0x4c/0xd8 [ 2027.087954] bus_remove_driver+0x54/0xa8 [ 2027.091877] driver_unregister+0x2c/0x58 [ 2027.095799] platform_driver_unregister+0x10/0x18 [ 2027.100509] dwc3_driver_exit+0x14/0x1408 [dwc3] [ 2027.105129] __arm64_sys_delete_module+0x178/0x218 [ 2027.109922] el0_svc_common.constprop.0+0x68/0x160 [ 2027.114714] do_el0_svc+0x20/0x80 [ 2027.118031] el0_sync_handler+0x88/0x190 [ 2027.121953] el0_sync+0x140/0x180 [ 2027.125267] ---[ end trace 027f4f8189958f1f ]--- [ 2027.129976] ------------[ cut here ]------------ Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: Signed-off-by: Li Jun Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: add phy cleanup for probe error handling

2020-11-05T10:51:38Z

commit 03c1fd622f72c7624c81b64fdba4a567ae5ee9cb upstream. Add the phy cleanup if dwc3 mode init fail, which is the missing part of de-init for dwc3 core init. Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths") Cc: Signed-off-by: Li Jun Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: do not queue work if dr_mode is not USB_DR_MODE_OTG

2020-11-05T10:51:24Z

[ Upstream commit dc336b19e82d0454ea60270cd18fbb4749e162f6 ] Do not try to queue a drd work if dr_mode is not USB_DR_MODE_OTG because the work is not inited, this may be triggered by user try to change mode file of debugfs on a single role port, which will cause below kernel dump: [ 60.115529] ------------[ cut here ]------------ [ 60.120166] WARNING: CPU: 1 PID: 627 at kernel/workqueue.c:1473 __queue_work+0x46c/0x520 [ 60.128254] Modules linked in: [ 60.131313] CPU: 1 PID: 627 Comm: sh Not tainted 5.7.0-rc4-00022-g914a586-dirty #135 [ 60.139054] Hardware name: NXP i.MX8MQ EVK (DT) [ 60.143585] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 60.148376] pc : __queue_work+0x46c/0x520 [ 60.152385] lr : __queue_work+0x314/0x520 [ 60.156393] sp : ffff8000124ebc40 [ 60.159705] x29: ffff8000124ebc40 x28: ffff800011808018 [ 60.165018] x27: ffff800011819ef8 x26: ffff800011d39980 [ 60.170331] x25: ffff800011808018 x24: 0000000000000100 [ 60.175643] x23: 0000000000000013 x22: 0000000000000001 [ 60.180955] x21: ffff0000b7c08e00 x20: ffff0000b6c31080 [ 60.186267] x19: ffff0000bb99bc00 x18: 0000000000000000 [ 60.191579] x17: 0000000000000000 x16: 0000000000000000 [ 60.196891] x15: 0000000000000000 x14: 0000000000000000 [ 60.202202] x13: 0000000000000000 x12: 0000000000000000 [ 60.207515] x11: 0000000000000000 x10: 0000000000000040 [ 60.212827] x9 : ffff800011d55460 x8 : ffff800011d55458 [ 60.218138] x7 : ffff0000b7800028 x6 : 0000000000000000 [ 60.223450] x5 : ffff0000b7800000 x4 : 0000000000000000 [ 60.228762] x3 : ffff0000bb997cc0 x2 : 0000000000000001 [ 60.234074] x1 : 0000000000000000 x0 : ffff0000b6c31088 [ 60.239386] Call trace: [ 60.241834] __queue_work+0x46c/0x520 [ 60.245496] queue_work_on+0x6c/0x90 [ 60.249075] dwc3_set_mode+0x48/0x58 [ 60.252651] dwc3_mode_write+0xf8/0x150 [ 60.256489] full_proxy_write+0x5c/0xa8 [ 60.260327] __vfs_write+0x18/0x40 [ 60.263729] vfs_write+0xdc/0x1c8 [ 60.267045] ksys_write+0x68/0xf0 [ 60.270360] __arm64_sys_write+0x18/0x20 [ 60.274286] el0_svc_common.constprop.0+0x68/0x160 [ 60.279077] do_el0_svc+0x20/0x80 [ 60.282394] el0_sync_handler+0x10c/0x178 [ 60.286403] el0_sync+0x140/0x180 [ 60.289716] ---[ end trace 70b155582e2b7988 ]--- Signed-off-by: Li Jun Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

2020-10-29T09:12:13Z

[ Upstream commit f580170f135af14e287560d94045624d4242d712 ] SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core of Hisilicon Kirin Soc when dwc3 core act as host. [mchehab: dropped a dev_dbg() as only traces are now allowwed on this driver] Signed-off-by: Yu Chen Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: dwc3: core: Properly default unspecified speed

2020-10-29T09:11:26Z

[ Upstream commit b574ce3ee45937f4a01edc98c59213bfc7effe50 ] If the maximum_speed is not specified, default the device speed base on its HW capability. Don't prematurely check HW capability before validating the maximum_speed device property. The device property takes precedence in dwc->maximum_speed. Fixes: 0e1e5c47f7a9 ("usb: dwc3: add support for USB 2.0-only core configuration") Reported-by: Chunfeng Yun Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

usb: dwc3: Replace HTTP links with HTTPS ones

2020-07-15T14:33:51Z

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Link: https://lore.kernel.org/r/20200711135804.19735-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Add support for DWC_usb32 IP

2020-05-25T08:09:40Z

Synopsys introduces a new controller DWC_usb32. It supports dual-lane and speed up to 20 Gbps, and the DWC3 driver will drive this controller. Currently the driver uses a single field dwc->revision to ID both DWC_usb3 and DWC_usb31 and their version number. This was sufficient for two IPs, but this method doesn't work with additional IPs. As a result, let's separate the dwc->revision field to 2 separate fields: ip and revision. The ip field now stores the ID of the controller's IP while the revision field stores the controller's version number. This new scheme enforces DWC3 to compare the revision within the same IP only. As a result, we must update all the revision check of the controller to check its corresponding IP. To help with this enforcement, we create a few macros to help with the common version checks: DWC3_IP_IS(IP) DWC3_VER_IS(IP, VERSION) DWC3_VER_IS_PRIOR(IP, VERSION) DWC3_VER_IS_WITHIN(IP, LOWER_VERSION, UPPER_VERSION) DWC3_VER_TYPE_IS_WITHIN(IP, VERSION, LOWER_VERSION_TYPE, UPPER_VERSION_TYPE) The DWC_usb32 controller operates using the same programming model and with very similar configurations as its previous controllers. Please note that the various IP and revision checks in this patch match the current checks for DWC_usb31 version 1.90a. Additional configurations that are unique to DWC_usb32 are applied separately. Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi

usb: dwc3: core: Use role-switch default dr_mode

2020-05-05T08:00:12Z

If the driver is configured to use DRD role-switch, let the drd code path decide the default dr_mode. Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi

usb: dwc3: support continuous runtime PM with dual role

2020-05-05T07:58:50Z

The DRD module calls dwc3_set_mode() on role switches, i.e. when a device is being plugged in. In order to support continuous runtime power management when plugging in / unplugging a cable, we need to call pm_runtime_get_sync() in this path. Signed-off-by: Martin Kepplinger Signed-off-by: Felipe Balbi